Continuing on from the previous tutorial:-

Return to QGIS. Add the westminster_const_region.shp file if necessary

1. Press the Add Delimitated Text file button, and select the .csv export of the cleansed electoral data
2. The two options I changed from the default settings are:-

• First record contains field names
• No geometry (attribute only table)

QGIS – Create layer from text file

Step 3 – Joining the data

Joining the polygons in westminster_const_region.shp to the data imported from the Results_Cleansed spreadsheet will allow the data to be presented in a spatial and visual format which will be much easier to interpret, allow for spatial analysis and also give the viewer an idea of the geographic spread. Using QGIS’ Join function will hopefully save a lot of copying and pasting!

Right click on westminster_const_region.shp and select Properties to open the Properties dialog

• Select the Joins button from the left panel

• Join Layer – the layer that you want to join to
• Join Field – the field that you want to join to

• Target Field – the field in this layer that contains the matching data

QGIS – Add vector layer

The join will now appear in the layer’s Joins list:-

QGIS layer properties

The attribute table will now show the combined  data for both layers:-

QGIS attribute table

This data can now be used to create a thematic map that colours each constituency according to party that won the seat in 2010.

I won’t go through all the steps of creating a thematic map as an earlier tutorial does this.

I’ve used the same colours that the different parties in the UK use:-

QGIS Layer properties

The thematic map shows the results across the entire UK. It is easy to identify patterns in the result, for example

• The Liberal Democrats mostly won seats in Scotland, the North East, Wales and South West.
• There is strong Labour support in South West Scotland, North West England, West Midlands, South Wales, London, Liverpool and Manchester.
• The Conservative support covers much of the rest of England, especially South East England, excluding London.

2010 election results map

I would like to show you how to use QGIS to combine different skills to

• Import data from Excel or other spreadsheets
• Analyse the data
• Present the results as a thematic map
• Use a feature subset to hide superfluous data

There is a year to go to the next general election. Under the British electoral system, the country is divided into 660 constituencies. The MP for each constituency is elected using the First Past the Post system, where the candidate with the most votes is chosen as MP for that constituency. The party that has the most MPs elected wins the election, and the right to form the nest government.

Parties concentrate their resources on the constituencies that they are most likely to win or lose. These are usually the ones where majority in the previous election was closest.

This project will use QGIS to join fields between OS Boundary line data and the 2010 election results to identify and map these constituencies.

I downloaded the following data sets:-

OS Boundaryline:  https://www.ordnancesurvey.co.uk/opendatadownload/products.html

Election results: http://www.electoralcommission.org.uk/__data/assets/excel_doc/0020/105725/GE2010-constituency-results-website.xls

Step 1 – Examine and prepare the data

I need both data sets to use exactly the same name and formatting in order to In order to add the 2010 election results to the OS Boundary line polygons.

1. Start QGIS and set the map projection to OSGB.
2. Use the Add Vector Layer button to add the file westminster_const_region.shp from the OS Boundary line data
3. Open the attribute table to check the data structure and contents:-

Constituency attribute table

Now to check the GE2010-constituency-results-website.xls

Election results Excel screenshot

Unfortunately the two datasets don’t use exactly the same constituency names! It is fairly easy, but time consuming to match the record from the Election Results dataset to the OS Boundary Line record using Excel or Libre Office.

To export the OS Boundary line polygon names to Excel:-

1. Right click on the westminster_const_region.shp in the Layers Panel
2. Select Save As

I prefer to use the .dbf format when exchanging data between GIS and Excel as it is quicker to import than using .csv format.

Both name fields are needed. The first, constituency _name will be used to link to the constituency polygons once the table is imported into QGIS. The second, Results_Table_Name is used by the VLOOKUP query that adds the five columns from the results data.

Excel screenshot showing the cleansed election results matched to constituency names

Save the data as a .csv file when this stage is complete.

In the previous post (Queries in QGIS pt 1 – Attribute Queries), I showed how to select features based on their attribute data, e.g. select shops which have the address entered as London. Now let’s imagine there isn’t an address attribute, or alternatively, we want to select features within flood plains for example, or identify areas of woodland that have high voltage power lines running through them.

Spatial selection selects features in one layer based on their spatial relationship to features in another layer

To begin a spatial query either:

• Use the menu to select Vector, Spatial Query
  
• Press the Spatial Query button
  

The spatial query dialogue box:

Select Source Features From – this is the table that the selection will be from.

Where the feature – the options will change depending on the exact combination of point, line or region features that are being used for the selection. They include contains (e.g. a region layer may contain points), crosses (e.g. a line layer may cross a region layer), Is Within (e.g. a point layer may be within a region layer), Touches (where one object may touch another but not actually be within it).

Reference Features Of – this is the second layer. It will be used to select features from the first layer, but its features won’t be part of the selection

The selected geometries only will only use features that have already been selected. For example if I wanted to select all the woodland within a particular county I could set up the query to read

• Select Source Features from Farmland
  
• Where the Feature is Within
  
• Reference features of County Boundaries (selected features only)
  

Click OK, the query will run. Once it has completed, the results will appear:-

It is possible to run a further query based on the selection

Press the Create Layer from Selected to add the selection to the map as a new layer:-

Combined Spatial and Attribute Query

Quite often GIS is used to select features that contain a certain attribute within a certain area (e.g. all the A roads and motorways within Greater London).

These queries are carried out by combining the above Spatial and attribute selections. They can be carried out either order depending on which is most logical.

In this example I would overlay the roads and OS Boundary Line features. I would then select all the London Boroughs by clicking on them with the Select Single Feature tool

• Select Source Features from Roads
  
• Where the Feature is Within
  
• Reference features of OS Boundaryline (selected features only)
  
• Press OK
  
• In the Results box, press the Create Layer from Selected to create a new layer
  
• Right click on the newly added Selection from Roads layer in the Layer Panel
  
• Select Query
  
• Use the Query Builder to enter the following SQL “Classification” = ‘A Road’ OR “Classification” = ‘Motorway’
  
• Press OK
  

Quick Select Tools

The Select Flyout button on the Main toolbar contains tools used to quickly select features:

QGIS Quick Select Tools

Attribute Queries

One method to select features in a layer is to select features using an attribute query:-

To query a layer by its attribute data,

1. Right click on the layer’s name in the Layer Panel
   
2. Select Query from the short cut menu to open the Query Builder box
   

QGIS Select by attributes box

1. It is possible to type the SQL query into the SQL where clause box. Alternatively:-
   
   1. Click the Field that contains the attributes you wish to base the query on
      
   2. Select the operator
      
   3. Press the All under the values box to list all the available values
      
   4. Double click the value that you wish to select
      
   5. You will see the query being built in the SQL where clauses box.
      

Boolean operations (And, Or, Not)

• And: narrows the search by requiring all the criteria to be present. It is most commonly used when the criteria are in different columns. E.g. Select Business_type = “bank” And City = “London” will select banks with London addresses.
  

• Or: broadens the search criteria by requiring just one of several criteria to be true. It is most commonly used to give different options to the same column e.g. select Business_type = “bank” Or Business_type = “shop” will select all the banks and shops within the data set.
  

• Not: returns records that do NOT match the criteria e.g. select Business_type = “bank” AND City NOT “London” would return all the banks that do not have a London address. Note that QGIS uses != for not equal to
  

It is important to be clear about when to use And Or operators.

If the first example was worded Select Business_type = “bank” OR City = “London” this would return all the banks and any property with a London address

If the second example was worded select Business_type = “bank” AND Business_type = “shop” this would return only those business which had bank and shop entered as business type. This would probably be none at all as businesses tend to either be a shop or a bank but rarely both!

Mathematical Operations

It is possible to use mathematical formulae to select from columns that are formatted in a numeric format (e.g. integer):-

>Greater than e.g. Business_type = “shop” AND floor_space > 100

< Less than e.g. Business_type = “shop” AND floor_space < 100

>= greater than or equal to

<= Less than or equal to

!= Does not equal

Editing Features

A lot of of GIS work involves editing polygons and polylines as well as calculating the size of any overlapping features. For example when I provided GIS support to a local authority’s planning team, I was regularly asked to calculate what proportion of proposed developments overlapped constraints such as flood zones.

In this tutorial, I first look at the re-shaping features on the Advanced Digitising Toolbar. Then I will go through geo-processing tools such as buffer, union, intersect etc.

Advanced Digitising Tools

QGIS Advanced Digitising Toolbar

From left to right, the tools are:

• Undo
  
• Redo
  
• Simplify feature
  
• Add ring
  
• Add part
  
• Delete ring
  
• Delete part
  
• Reshape features
  
• Merge selected features
  
• Merge attributes of selected features
  

To use any of the tools,

• Begin an edit session, by right click on the layer’s name in the Layer Panel and select toggle editing.
  
• Select the feature that you wish to edit
  
• Select the tool
  

This is the polygon at the start of the edit session, I will show a screen shot of each result:

Polygon in QGIS

Add Ring

is used to subtract a new internal region from the existing polygon. Select the tool and then draw the desired internal polygon:-

Add Ring in QGIS

Delete Ring

deletes the selected internal region. Select the tool, and then click on the internal region’s nodes.

Add Part

adds a new external region to the existing region. Select the tool, then draw the new region, ensure it snaps to the existing region:-

Add Part in QGIS

Delete Part

deletes the selected region. Select the tool, and then click on the region’s nodes.

Reshape Features

draws a temporary region which is then subtracted from the existing region:

Reshape Features in QGIS

Reshape Features in QGIS

Split Features

draws a line through the region. The region is then split along the line

Split Features in QGIS

Merge Features – merges two or more selected features. Note Ctrl+click is used to select multiple features

Merge Features in QGIS

A dialogue box allows you to choose which attributes to keep, discard. It is also possible to carry out mathematical operations such as sum, maximum on numeric fields and to concatenate text fields:-

Attributes in QGIS