3.0.6 - 2018/06/20 - Bug fixs:
- Sancad file import bug
- Minor bugs fix
- Added Button with option to donate on metadata
3.0.5 - 2018/06/01 - Bug fixs:
- Wrong Call to Calculate with Brazil Standard
- Minor Profile Chart bug
- Minor bug Fill up fields when using India Standard
- Fix Calculation according to Indian Technical Standard
3.0.4 - 2018/05/31 - Improvement:
- Calculation according to Indian Technical Standard
3.0.3 - 2018/05/15 - Fix:
- Fix Indian Standard Initial Flow Calculation
3.0.2 - 2018/05/12 - Improvements:
- Added Indian Standard Flow Calculation option
3.0.1 - 2018/04/11 - Improvements and bugs:
- Minor bugs
- Error on DXF export
- Some interface elements translation
- Settings dialog resizing improvement
3.0.0 - 2018/04/08 - Update to Qgis 3 and minor improvements
1.5.2 - 2018/03/11 - Improvements:
- Added offset to Point Style Label
- Added Progress Bar information to the network calculation process with Cancel
option
- Added Progress Bar information to the Flow calculation process with Cancel
option
- Added Option to Change QEsg display styles direct from QEsg toolbar
1.5.1 - 2018/03/11 - Improvement and bugs: (thanks to Thiago Decina)
- Increased fields size from 2 to 6 digits to allow networks with up to 999999
Manifolds with 999999 reaches each
- Fixed and Improved Table sort routine on Flow Calculation Class
1.5.0 - 2018/03/03 - Incorrect calculation of the initial water depth (thanks to
Thiago Decina)
1.4.6 - 2016/11/18 - Improvement and minor bugs:
- The exported DXF file had ground Elevation duplicated instead of pipe manifold
elevation
- The ezDXF library is now only loaded when needed
1.4.5 - 2016/09/26 - Improvement and minor bugs:
- The Export DXF tool now create DXF file that can be imported into Sancad
- Option to Match Pipe Upper Edge is now available
- Replaced dxfwrite with the newer ezdxf python library
- Added maximum speed user parameter
- Minimum covering error on big diameters
1.3.3 - 2016/08/18 - Minor bug:
- When 'Maximum downstream plunge' parameter was set, the logic loop was using
minimum slope smaller than possible, ignoring minimum covering even causing
negative depth
1.3.2 - 2016/08/10 - Improvements and minor bugs:
- Bug not consider Progressive Diameter option on big slopes changes
- Added option to use full decimal length precision instead Sancad's (0
decimal)
- Increased 'LENGTH' field precision to 3 decimals
1.3.1 - 2016/08/09 - Minor bugs:
- Null Node shapefile creation above Qgis 2.14.5
1.3.0 - 2016/08/08 - Minor bugs:
- When 'Maximum downstream plunge' parameter was set, the logic loop was not
recalculating the slope on each Diameter increase
- Also check Duplicated PVM identification when 'Check Polylines' button clicked
on Rename Dialog
- Use the bigger diameter available even without flow capacity and add Warning
to the 'OBS' Field
- Virtual length issue for reaches with CONTR_LADO=0
1.2.0 - 2016/07/11 - Improvements and minor bug:
- Added Manhole representation to Profile
- Added libraries information to this metadata
- Added prefix to Blocks layer names too on exported DXF
- Bug: Tiny Unnecessary deepening below interference on elevated slopes
1.1.0 - 2016/07/02 - Improvements:
- Added DXF Export option
1.0.1 - 2016/06/22 - Improvements:
- Added Examples Menu
1.0.0 - 2016/06/21 - Initial Release