3.0.10 - Bug fixes and improvements:
2019/09/25 - Check required fields before Fill in routine
2019/09/21 - Added progressBar to the Fill in Tool process
2019/09/21 - Check required fields before sizing routine
2019/09/21 - Created 'DECL_MIN' field for store calculated minimum slope in pipe
attribute table
2019/09/14 - Replaced gdal by ezdxf library on import Sancad DXF file, because
of discontinued Extended entity support from version 2.2 and above of gdal
2019/08/31 - Bug on Create Nodes tool creating duplicated features when network
not topological 'snapped'
2019/08/30 - Bug on Update Manhole names from Node Layer caused by
MultiLineString elements
3.0.9 - Bug fix and Minor improvement:
2019/02/14 - Added Last (most downstream) manhole data do the DXF export
2019/02/14 - Added downstream manifold elevation to the DXF Export when it has
steps
2019/02/14 - Last MH draw error on Draw Profile view
2019/02/12 - Added Optional DIAMETER and CGI fields to Interferences table,
these fields are only for display interference itself on the profile plot. For
calculations nothing changed, the required fields remains CS and CI (Upper and
Lower Elevation of Interference Zone).
2019/02/11 - Added tool for get elevation data from raster
2019/02/08 - Added Pipe style for show nodal contribution flow
2019/02/07 - Added Interferences 'id' label to profile plot
2018/10/04 - Better Error handling with "Fill in" Tool when node number not
found
3.0.8 - 2018/10/04 - Bug fix:
- Fix bug on using interferences
3.0.7 - 2018/08/09 - Bug fixs:
- Bug translations to english
- Bug on renumber Multipart layer
- Call English help file if locale is not 'pt' (Portuguese)
3.0.6 - 2018/06/20 - Bug fixs:
- Sancad file import bug
- Minor bugs fix
- Added Button with option to donate on metadata
3.0.5 - 2018/06/01 - Bug fixs:
- Wrong Call to Calculate with Brazil Standard
- Minor Profile Chart bug
- Minor bug Fill up fields when using India Standard
- Fix Calculation according to Indian Technical Standard
3.0.4 - 2018/05/31 - Improvement:
- Calculation according to Indian Technical Standard
3.0.3 - 2018/05/15 - Fix:
- Fix Indian Standard Initial Flow Calculation
3.0.2 - 2018/05/12 - Improvements:
- Added Indian Standard Flow Calculation option
3.0.1 - 2018/04/11 - Improvements and bugs:
- Minor bugs
- Error on DXF export
- Some interface elements translation
- Settings dialog resizing improvement
3.0.0 - 2018/04/08 - Update to Qgis 3 and minor improvements
1.5.2 - 2018/03/11 - Improvements:
- Added offset to Point Style Label
- Added Progress Bar information to the network calculation process with Cancel
option
- Added Progress Bar information to the Flow calculation process with Cancel
option
- Added Option to Change QEsg display styles direct from QEsg toolbar
1.5.1 - 2018/03/11 - Improvement and bugs: (thanks to Thiago Decina)
- Increased fields size from 2 to 6 digits to allow networks with up to 999999
Manifolds with 999999 reaches each
- Fixed and Improved Table sort routine on Flow Calculation Class
1.5.0 - 2018/03/03 - Incorrect calculation of the initial water depth (thanks to
Thiago Decina)
1.4.6 - 2016/11/18 - Improvement and minor bugs:
- The exported DXF file had ground Elevation duplicated instead of pipe manifold
elevation
- The ezDXF library is now only loaded when needed
1.4.5 - 2016/09/26 - Improvement and minor bugs:
- The Export DXF tool now create DXF file that can be imported into Sancad
- Option to Match Pipe Upper Edge is now available
- Replaced dxfwrite with the newer ezdxf python library
- Added maximum speed user parameter
- Minimum covering error on big diameters
1.3.3 - 2016/08/18 - Minor bug:
- When 'Maximum downstream plunge' parameter was set, the logic loop was using
minimum slope smaller than possible, ignoring minimum covering even causing
negative depth
1.3.2 - 2016/08/10 - Improvements and minor bugs:
- Bug not consider Progressive Diameter option on big slopes changes
- Added option to use full decimal length precision instead Sancad's (0
decimal)
- Increased 'LENGTH' field precision to 3 decimals
1.3.1 - 2016/08/09 - Minor bugs:
- Null Node shapefile creation above Qgis 2.14.5
1.3.0 - 2016/08/08 - Minor bugs:
- When 'Maximum downstream plunge' parameter was set, the logic loop was not
recalculating the slope on each Diameter increase
- Also check Duplicated PVM identification when 'Check Polylines' button clicked
on Rename Dialog
- Use the bigger diameter available even without flow capacity and add Warning
to the 'OBS' Field
- Virtual length issue for reaches with CONTR_LADO=0
1.2.0 - 2016/07/11 - Improvements and minor bug:
- Added Manhole representation to Profile
- Added libraries information to this metadata
- Added prefix to Blocks layer names too on exported DXF
- Bug: Tiny Unnecessary deepening below interference on elevated slopes
1.1.0 - 2016/07/02 - Improvements:
- Added DXF Export option
1.0.1 - 2016/06/22 - Improvements:
- Added Examples Menu
1.0.0 - 2016/06/21 - Initial Release