02Morphometrics carries a morphometric study from building footprints to a documented urban-fabric typology inside QGIS. It follows the numerical-taxonomy workflow of Fleischmann et al. (2022): the space is partitioned into one tessellation cell per building; primary characters are measured at five scales (building, cell, block, street segment, street node) and linked to the cells; each character is described over a \(k\)-order neighbourhood of the cell (contextual characters); the contextual columns are standardised, reduced by principal components and clustered; every cluster becomes a type card with a name, its share of the area and its distinctive characters.
The same chain is available in two ways: the lab dock (step by step, with charts and a styled map) and the Processing provider (one algorithm per step plus a whole-chain algorithm, usable in models and batch runs). Only qgis.core, NumPy and PyQt are required; SciPy is used for a faster nearest-neighbour search when present, with identical results without it.
Why it exists: momepy is the reference toolkit for quantitative urban morphology but lives in Python notebooks on GeoPandas, outside QGIS. QGIS tools such as PlanX, MORPHINT, UrbanMorphoBox, MorphAL and AwaP each cover one slice (single tessellation or form tools, parcel intensity, footprint download, block measures). None carries a study from footprints to a documented typology.
All measures are in metres and square metres. If the building layer is geographic, its map units are not metres, or it is Web Mercator (EPSG:3857 family, whose metres are stretched by \(1/\cos\varphi\), \(\varphi\) the latitude), every input is reprojected to the UTM zone of the building layer's extent centre (EPSG:326xx north, 327xx south). Otherwise the input CRS is kept. Outputs are written in the working CRS, and the Data page badge, the run log and the report say which CRS was used and why.
Pick the building footprints (polygons), optional street centre lines, optional study-limit polygon layer, the building id field (unique integers are used as uid; anything else is kept as src_id and \(1, \dots, n\) is used) and the height field (metres). The CRS badge shows the working CRS. Load demo town adds the synthetic town of section 10. KPI cards: buildings, mean footprint, total footprint, extent. Run all steps runs the whole chain with the settings of every page.
Mode: morphological (one Voronoi cell per building inside a limit) or enclosed (the same inside every street enclosure; needs streets). Limit: buffer distance around the footprints (default 100 m), or the limit layer. Shrink (0.4 m) and segment (0.5 m) control the seed points. KPI cards: cells, coverage ratio, cells without a building.
A searchable checklist grouped by level and category. Hover an item for its label, formula, unit and reference. Presets: Core 20, Full, Shape only, Street & network. Characters needing heights or streets are skipped (and listed in the log) when the input is missing. After the run up to 40 characters linked to the cells get a small distribution bar (2nd–98th percentile, with the median) and the cell map can be coloured by any character (graduated).
Contiguity (queen: cells sharing a vertex; rook: sharing an edge), order \(k\) (default \(k = 3\): the cell, its neighbours, their neighbours and the next ring) and the statistics. Section 7 gives the formulas.
Range of \(k\) (\(k_{\min} = 2\) to \(k_{\max} = 12\)), method (k-means or Ward), PCA variance (0.95). Find \(k\) computes the diagnostics and draws silhouette, Calinski-Harabasz, Davies-Bouldin and within-cluster sum of squares curves with the chosen \(k\) highlighted. Classify uses that \(k\) (or the \(k\) typed in) and fills the card gallery: colour swatch, name, share of the area, and the three most distinctive characters with up and down bars. The cell layer is styled by type with the card colours.
Writes the HTML report (types, profiles, diagnostics, characters with formulas, parameters, timings, log, references), a CSV of the cells and a GeoPackage with every layer; a link opens the report in the browser.
Rasterises the footprints at a chosen cell size (default 10 m) and measures them around a centre (the densest cell, the footprint-weighted centroid or the map canvas centre): built share (cells whose centre lies in a footprint), patches (8-connected groups of built cells), the share of the largest patch \(n_{\max} / n_{\mathrm{built}}\) (cells of the largest patch over built cells), the density gradient \(\beta\) (least-squares slope of the built share \(b_r\) of ring \(r\) against its mid-distance \(\rho_r\), \(b_r \approx \beta_0 + \beta \rho_r\), in percentage points per km) and the built share in eight concentric rings.
A short guide, the method references and links to this manual and the repository.
Each page button runs only its own step and keeps the earlier results, so changing the context order and running the context step again does not recompute the tessellation. Every step runs in a QGIS background task with a progress bar and a Cancel button; the dock stays responsive.
Provider zero2morphometrics. Every algorithm copies its inputs, reprojects them to the working CRS (section 3) and writes its outputs with real field types (integers for ids, doubles for characters, NULL where a value is undefined). Parameters marked advanced are under Advanced parameters in the dialog. From Python: processing.run("zero2morphometrics:<id>", {...}).
Id: zero2morphometrics:morphological_tessellation
Partitions the space around building footprints into one cell per building: the Voronoi diagram of points placed along the (slightly shrunk) footprint outlines, dissolved by building and clipped to a limit. The limit is a study-area polygon layer, or the union of the footprints buffered by the buffer distance (momepy buffered_limit).
Shrink moves each footprint outline inward before seeding so adjacent buildings do not share seed points; segment is the densification step of the outlines (smaller = closer to the exact skeleton, slower).
Output fields: uid (building id), cell_id, and src_id when the id field is not a unique integer. Geographic or Web Mercator input is reprojected to its UTM zone.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
BUILDINGS | Building footprints | Vector features | - | |
ID_FIELD | Building id field (empty: \(1, \dots, n\)) optional | Field | - | |
LIMIT | Study limit polygons (empty: buffer) optional | Vector features | - | |
BUFFER | Limit buffer around buildings (m) | Number | 100.0 | Min 0.1. |
SHRINK | Inward shrink before seeding (m) advanced | Number | 0.4 | Min 0. |
SEGMENT | Densification segment (m) advanced | Number | 0.5 | Min 0.01. |
OUTPUT | Tessellation | Feature sink (output) | - | |
CELLS | Number of cells | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:enclosures
Polygons fully enclosed by the street network (and by the boundary of the study limit when one is given): the street lines are noded, unioned and polygonised (momepy enclosures). Without a limit only street-closed polygons are returned. Output field: eid.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
STREETS | Street centre lines | Vector features | - | |
LIMIT | Study limit polygons (optional) optional | Vector features | - | |
OUTPUT | Enclosures | Feature sink (output) | - | |
ENCLOSURES | Number of enclosures | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:enclosed_tessellation
Morphological tessellation run separately inside every enclosure, so cell edges follow the streets. A building belongs to the enclosure that contains its point on surface; an enclosure with one building is that building's cell; an enclosure without buildings is kept as an empty cell (uid NULL).
Shrink moves each footprint outline inward before seeding so adjacent buildings do not share seed points; segment is the densification step of the outlines (smaller = closer to the exact skeleton, slower).
Output fields: uid, cell_id, eid (and src_id).
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
BUILDINGS | Building footprints | Vector features | - | |
ID_FIELD | Building id field (empty: \(1, \dots, n\)) optional | Field | - | |
ENCLOSURES | Enclosures | Vector features | - | |
SHRINK | Inward shrink before seeding (m) advanced | Number | 0.4 | Min 0. |
SEGMENT | Densification segment (m) advanced | Number | 0.5 | Min 0.01. |
OUTPUT | Enclosed tessellation | Feature sink (output) | - | |
CELLS | Number of cells | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:building_characters
Dimension and shape characters of every footprint, computed in the working CRS (metres). Characters that need heights are computed only when a height field is given; a value that is undefined for a footprint is NULL, never 0 or -1. The output keeps the source fields and adds uid.
Characters: see section 6.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
BUILDINGS | Building footprints | Vector features | - | |
ID_FIELD | Building id field (empty: \(1, \dots, n\)) optional | Field | - | |
HEIGHT_FIELD | Height field in metres (optional) optional | Field | - | |
CHARACTERS | Characters (empty: the default set) optional | Choice | the default set | 25 options (the characters of this level, see section 6). Several allowed. |
OUTPUT | Buildings with characters | Feature sink (output) | - |
Id: zero2morphometrics:cell_characters
Characters of the tessellation cells and of the building neighbourhood they define. The cell layer needs a uid field linking each cell to a building (as written by the tessellation algorithms); the building id field must hold the same values (empty: \(1, \dots, n\) in feature order, which matches a tessellation run without an id field). Neighbour characters use queen or rook contiguity of the cells.
Characters: see section 6.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
CELLS | Tessellation cells | Vector features | - | |
BUILDINGS | Building footprints | Vector features | - | |
ID_FIELD | Building id field matching the cell uid (empty: \(1, \dots, n\)) optional | Field | - | |
CONTIGUITY | Contiguity | Choice | queen | Options: queen, rook. |
CHARACTERS | Characters (empty: the default set) optional | Choice | the default set | 15 options (the characters of this level, see section 6). Several allowed. |
OUTPUT | Cells with characters | Feature sink (output) | - |
Id: zero2morphometrics:block_characters
Characters of blocks (for example the output of Enclosures) and of the buildings inside them; a building belongs to the block containing its point on surface. With a cell layer the cell-weighted characters are also computed.
Characters: see section 6.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
BLOCKS | Blocks or enclosures | Vector features | - | |
BUILDINGS | Building footprints | Vector features | - | |
CELLS | Tessellation cells (optional) optional | Vector features | - | |
CHARACTERS | Characters (empty: the default set) optional | Choice | blk_area - Block area, blk_perimeter - Block perimeter, blk_circ_compact - Block circular compactness, blk_elongation - Block elongation, blk_cwa - Compactness-weighted axis, blk_buildings - Buildings in block, blk_coverage - Block coverage, blk_cells_ha - Weighted cell count | Options: blk_area - Block area, blk_perimeter - Block perimeter, blk_circ_compact - Block circular compactness, blk_elongation - Block elongation, blk_cwa - Compactness-weighted axis, blk_buildings - Buildings in block, blk_coverage - Block coverage, blk_cells_ha - Weighted cell count. Several allowed. |
OUTPUT | Blocks with characters | Feature sink (output) | - |
Id: zero2morphometrics:street_segment_characters
The street lines are noded at every crossing and false nodes (degree 2) are merged; each resulting segment gets the selected characters. Street-profile characters cast perpendicular ticks every \(10\,\mathrm{m}\), each \(50\,\mathrm{m}\) long, reaching \(25\,\mathrm{m}\) on each side and need the building layer (height-to-width also needs the height field). Output fields: edge_id, node_u, node_v and the characters.
Characters: see section 6.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
STREETS | Street centre lines | Vector features | - | |
BUILDINGS | Building footprints (optional) optional | Vector features | - | |
HEIGHT_FIELD | Height field in metres (optional) optional | Field | - | |
CHARACTERS | Characters (empty: the default set) optional | Choice | the default set | 9 options (the characters of this level, see section 6). Several allowed. |
OUTPUT | Street segments | Feature sink (output) | - | |
SEGMENTS | Number of segments | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:street_node_characters
Nodes of the noded, false-node-merged street network with degree and the local network characters, measured in the subgraph \(G_r(u)\) within \(r\) = radius topological steps of each node \(u\). Output fields: node_id and the characters.
Characters: see section 6.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
STREETS | Street centre lines | Vector features | - | |
RADIUS | Local radius (topological steps) | Number | 5 | Min 1. Max 50. |
CHARACTERS | Characters (empty: the default set) optional | Choice | node_degree - Node degree, node_mean_dist - Mean node distance, node_meshedness - Local meshedness, node_gamma - Local gamma, node_cds_share - Cul-de-sac share, node_closeness - Local closeness | Options: node_degree - Node degree, node_mean_dist - Mean node distance, node_meshedness - Local meshedness, node_gamma - Local gamma, node_cds_share - Cul-de-sac share, node_closeness - Local closeness. Several allowed. |
OUTPUT | Street nodes | Feature sink (output) | - | |
NODES | Number of nodes | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:contextual_characters
For every selected field, statistics of the values over each feature's neighbourhood \(N_k(i)\): the feature itself and every feature within \(k\) = order steps of queen or rook contiguity (\(k\)-order contiguity of the tessellation in the momepy workflow). Each statistic is written as field_suffix:
Run it on the cell layer after the character algorithms.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
INPUT | Cells (or any polygon layer) | Vector features | - | |
FIELDS | Fields | Field | - | |
CONTIGUITY | Contiguity | Choice | queen | Options: queen, rook. |
ORDER | Neighbourhood order \(k\) (topological steps) | Number | 3 | Min 1. Max 10. |
STATS | Statistics | Choice | mean, interquartile range, Simpson diversity | Options: mean, median, interquartile range, interdecile range, Simpson diversity, Theil index, Gini coefficient. Several allowed. |
OUTPUT | Contextual characters | Feature sink (output) | - |
Id: zero2morphometrics:typology
Clusters the features (normally tessellation cells with contextual characters) into urban fabric types and adds cluster (\(1, \dots, k\), types numbered by decreasing size) and cluster_name, a short plain-English name read from the type's median characters.
The clustering columns are standardised (z-scores \((x - \bar x)/s\), or robust \((x - \tilde x) / (\mathrm{IQR} / 1.349)\), section 8), missing values set to the column centre, and reduced by principal components to the share of variance given. With \(k = 0\) the number of types is chosen over \(k_{\min}, \dots, k_{\max}\): elbow of the within-cluster sum of squares over the tested \(k\) (Kneedle, Satopaa et al. 2011: after min-max scaling both axes, the \(k\) farthest below the chord joining the first and last point, eq. (21)); ties to the smaller \(k\). Silhouette, Calinski-Harabasz and Davies-Bouldin are reported alongside to judge the choice. k-means uses k-means++ seeding and 10 restarts; Ward is agglomerative on micro-clusters for large layers. Results are deterministic for a fixed seed.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
INPUT | Cells with characters | Vector features | - | |
FIELDS | Clustering fields (empty: every contextual column, else every character) optional | Field | - | |
K | Number of types \(k\) (0: choose from the diagnostics) | Number | 0 | Min 0. Max 30. |
K_MIN | Smallest \(k\) tested, \(k_{\min}\) advanced | Number | 2 | Min 2. Max 30. |
K_MAX | Largest \(k\) tested, \(k_{\max}\) advanced | Number | 12 | Min 2. Max 30. |
METHOD | Method | Choice | k-means | Options: k-means, Ward. |
STANDARDISE | Standardisation advanced | Choice | z-scores | Options: z-scores, robust. |
PCA_VARIANCE | Variance share kept by PCA, \(\tau\) advanced | Number | 0.95 | Min 0.5. Max 1. |
SEED | Random seed advanced | Number | 42 | Min 0. |
OUTPUT | Typology | Feature sink (output) | - | |
CHOSEN_K | Number of types | Output number | - | Returned in the result dictionary. |
SILHOUETTE | Silhouette \(\bar s\) of the chosen \(k\) | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:urban_morphometrics_lab
The whole numerical-taxonomy chain of Fleischmann et al. (2022) in one run: morphological or enclosed tessellation, primary characters at five scales (building, cell, block, street segment, street node; block, street and node characters need the street layer) linked to the cells, contextual characters over \(k\)-order contiguity, standardisation and PCA, the number of types from the diagnostics, k-means or Ward clustering, and type names. The same function runs the dock's Run all steps.
Outputs: cells with every primary and contextual character, cluster, cluster_name and cluster_margin; buildings with their characters and cluster; with streets also the noded street segments, nodes and blocks; optionally a self-contained HTML report.
The clustering columns are standardised (z-scores \((x - \bar x)/s\), or robust \((x - \tilde x) / (\mathrm{IQR} / 1.349)\), section 8), missing values set to the column centre, and reduced by principal components to the share of variance given. With \(k = 0\) the number of types is chosen over \(k_{\min}, \dots, k_{\max}\): elbow of the within-cluster sum of squares over the tested \(k\) (Kneedle, Satopaa et al. 2011: after min-max scaling both axes, the \(k\) farthest below the chord joining the first and last point, eq. (21)); ties to the smaller \(k\). Silhouette, Calinski-Harabasz and Davies-Bouldin are reported alongside to judge the choice. k-means uses k-means++ seeding and 10 restarts; Ward is agglomerative on micro-clusters for large layers. Results are deterministic for a fixed seed.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
BUILDINGS | Building footprints | Vector features | - | |
STREETS | Street centre lines (optional) optional | Vector features | - | |
LIMIT | Study limit polygons (optional) optional | Vector features | - | |
ID_FIELD | Building id field (empty: \(1, \dots, n\)) optional | Field | - | |
HEIGHT_FIELD | Height field in metres (optional) optional | Field | - | |
TESS_MODE | Tessellation | Choice | Morphological | Options: Morphological, Enclosed (needs streets). |
BUFFER | Limit buffer around buildings (m) advanced | Number | 100.0 | Min 0.1. |
SHRINK | Inward shrink before seeding (m) advanced | Number | 0.4 | Min 0. |
SEGMENT | Densification segment (m) advanced | Number | 0.5 | Min 0.01. |
PRESET | Characters | Choice | Default set | Options: Default set, Core 20, Full, Shape only, Street & network. |
CONTIGUITY | Contiguity advanced | Choice | queen | Options: queen, rook. |
ORDER | Context order \(k\) (topological steps) | Number | 3 | Min 1. Max 10. |
STATS | Contextual statistics advanced | Choice | mean, interquartile range, Simpson diversity | Options: mean, median, interquartile range, interdecile range, Simpson diversity, Theil index, Gini coefficient. Several allowed. |
K | Number of types \(k\) (0: choose from the diagnostics) | Number | 0 | Min 0. Max 30. |
K_MIN | Smallest \(k\) tested, \(k_{\min}\) advanced | Number | 2 | Min 2. Max 30. |
K_MAX | Largest \(k\) tested, \(k_{\max}\) advanced | Number | 12 | Min 2. Max 30. |
METHOD | Method | Choice | k-means | Options: k-means, Ward. |
STANDARDISE | Standardisation advanced | Choice | z-scores | Options: z-scores, robust. |
PCA_VARIANCE | Variance share kept by PCA, \(\tau\) advanced | Number | 0.95 | Min 0.5. Max 1. |
SEED | Random seed advanced | Number | 42 | Min 0. |
CELLS | Typology (tessellation cells) | Feature sink (output) | - | |
BUILDINGS_OUT | Buildings with characters | Feature sink (output) | - | |
STREETS_OUT | Street segments optional | Feature sink (output) | - | |
NODES_OUT | Street nodes optional | Feature sink (output) | - | |
BLOCKS_OUT | Blocks optional | Feature sink (output) | - | |
REPORT | HTML report optional | File (output) | - | |
CHOSEN_K | Number of types | Output number | - | Returned in the result dictionary. |
CELL_COUNT | Number of cells | Output number | - | Returned in the result dictionary. |
Id: zero2morphometrics:html_report
A self-contained HTML report (inline CSS and SVG, no external resources) of a classified cell layer: one card per type with its distinctive characters (median robust z-scores \(\zeta_{c,f}\), eq. (26)), a type-profile heat table, the formula, unit and reference of every character found in the layer, and the full references. Features without a cluster value are left out. For the diagnostics curves and run log, use the HTML report output of the whole-chain algorithm.
| Parameter | Description | Type | Default | Notes |
|---|---|---|---|---|
INPUT | Classified cells | Vector features | - | |
CLUSTER_FIELD | Cluster field | Field | cluster | |
BUILDINGS | Buildings (optional, for the count) optional | Vector features | - | |
NOTE | Note shown under the title optional | Text | - | |
OUTPUT | HTML report | File (output) | - | |
TYPES | Number of types | Output number | - | Returned in the result dictionary. |
import processing
t = processing.run("zero2morphometrics:morphological_tessellation",
{"BUILDINGS": b, "ID_FIELD": "bid", "OUTPUT": "TEMPORARY_OUTPUT"})["OUTPUT"]
c = processing.run("zero2morphometrics:cell_characters",
{"CELLS": t, "BUILDINGS": b, "ID_FIELD": "bid", "OUTPUT": "TEMPORARY_OUTPUT"})["OUTPUT"]
x = processing.run("zero2morphometrics:contextual_characters",
{"INPUT": c, "FIELDS": ["cell_area", "cell_coverage", "nbr_distance"],
"ORDER": 3, "STATS": [0, 2, 4], "OUTPUT": "TEMPORARY_OUTPUT"})["OUTPUT"]
r = processing.run("zero2morphometrics:typology", {"INPUT": x, "K": 0, "OUTPUT": "TEMPORARY_OUTPUT"})
print(r["CHOSEN_K"], r["SILHOUETTE"])
The cell layer links to the buildings through uid. Run the tessellation and the cell characters with the same building id field (or both without one, which numbers the buildings \(1, \dots, n\) in feature order). The statistics indices are 0 mean, 1 median, 2 IQR, 3 IDR, 4 Simpson, 5 Theil, 6 Gini.
63 primary characters. Default marks the set used when nothing is selected; characters that need heights or streets are used only when that input is given. Every value that is undefined for a unit (for example the orientation of a circle) is NULL, never 0 or -1.
Constants: storey height for floor area \(3\,\mathrm{m}\); corner threshold \(\varepsilon = 10^\circ\) (momepy corners, squareness); centroid-corner threshold \(\varepsilon = 5^\circ\); building neighbourhood for adjacency, interbuilding distance and reach \(N_3(i)\), 3 topological steps; street profile ticks every \(10\,\mathrm{m}\), \(50\,\mathrm{m}\) long, \(25\,\mathrm{m}\) on each side; node radius \(r = 5\) steps.
\(A\) is the footprint area and \(P\) its perimeter over all rings (exterior and holes); \(H\) the height and \(V = AH\) the volume. MRR is the minimum rotated rectangle of the convex hull, with length \(l_{\mathrm{MRR}} \ge\) width \(w_{\mathrm{MRR}}\), area \(A_{\mathrm{MRR}}\) and perimeter \(P_{\mathrm{MRR}} = 2(l_{\mathrm{MRR}} + w_{\mathrm{MRR}})\); \(A_{\mathrm{hull}}\) is the convex hull area. SEC is the smallest enclosing circle, radius \(r_{\mathrm{SEC}}\), and \(\mathrm{LAL} = 2 r_{\mathrm{SEC}}\) the longest axis length. \(\theta_v \in [0^\circ, 180^\circ]\) is the angle between the two edges meeting at vertex \(v\); a vertex is a corner when \(\theta_v \le 180^\circ - \varepsilon\). \(N(i)\) is the set of contiguity neighbours of cell \(i\) and \(N_k(i)\) the cells within \(k\) topological steps, focal cell included; \(B_i\) is the footprint of cell \(i\). For streets, \(L\) is the segment length and \(G_r(u)\) the subgraph of the nodes within \(r\) steps of node \(u\), with \(v\) nodes and \(e\) edges. An undefined value (zero denominator, missing input) is NULL.
where, in (1) to (7), the symbols are those of the notation above; (7) is applied to blocks, with \(A\), \(P\) and \(\mathrm{LAL}\) of the enclosure.
\[ \bar w = \frac{1}{m} \sum_{t=1}^{m} \left(d^{\mathrm{L}}_t + d^{\mathrm{R}}_t\right), \qquad d^{\mathrm{L,R}}_t = \begin{cases} \text{distance to the first facade hit} & \text{if one lies within } 25\,\mathrm{m} \\ 25\,\mathrm{m} & \text{otherwise} \end{cases} \tag{8} \]where \(m\) is the number of ticks of the segment (placed at \(5, 15, 25, \dots\,\mathrm{m}\) along it, perpendicular to it) and \(d^{\mathrm{L}}_t\), \(d^{\mathrm{R}}_t\) the left and right distances of tick \(t\).
\[ M(u) = \frac{e - v + 1}{2v - 5} \tag{9} \] \[ \gamma(u) = \frac{e}{3(v - 2)} \tag{10} \] \[ C(u) = \frac{v - 1}{\sum_{w \in G_5(u)} d_L(u, w)} \tag{11} \]where \(v\) and \(e\) are the numbers of nodes and edges of the local subgraph \(G_5(u)\) (nodes within 5 topological steps of \(u\) and the edges between them), and \(d_L(u, w)\) is the metric shortest-path length from \(u\) to \(w\) inside \(G_5(u)\). Both \(M\) and \(\gamma\) are NULL for \(v \le 2\).
| Key | Label | Category | Formula | Unit | Reference | Default | Needs |
|---|---|---|---|---|---|---|---|
bld_area | Footprint area | dimension | \(A\) | \(\mathrm{m^2}\) | Fleischmann et al. 2021 | yes | |
bld_perimeter | Perimeter | dimension | \(P\) (all rings) | \(\mathrm{m}\) | Fleischmann et al. 2021 | yes | |
bld_lal | Longest axis length | dimension | \(\mathrm{LAL} = 2\,r_{\mathrm{SEC}}\) of the convex hull | \(\mathrm{m}\) | Fleischmann 2019 | yes | |
bld_court_area | Courtyard area | dimension | \(A_{\mathrm{court}} = \sum A_{\mathrm{hole}} = A_{\mathrm{ext}} - A\) | \(\mathrm{m^2}\) | Schirmer & Axhausen 2016 | yes | |
bld_height | Height | dimension | \(H\) (input field) | \(\mathrm{m}\) | Schirmer & Axhausen 2016 | yes | height |
bld_volume | Volume | dimension | \(V = A\,H\) | \(\mathrm{m^3}\) | Fleischmann et al. 2021 | yes | height |
bld_floor_area | Floor area | dimension | \(A \left\lfloor H / 3\,\mathrm{m} \right\rfloor\) | \(\mathrm{m^2}\) | Fleischmann et al. 2021 | yes | height |
bld_eri | Equivalent rectangular index | shape | \(\sqrt{A / A_{\mathrm{MRR}}}\; P_{\mathrm{MRR}} / P\), eq. (1) | ratio | Basaraner & Cetinkaya 2017 | yes | |
bld_circ_compact | Circular compactness | shape | \(A / (\pi\, r_{\mathrm{SEC}}^{2})\), eq. (2) | ratio | Dibble et al. 2019 | yes | |
bld_sq_compact | Square compactness | shape | \((4\sqrt{A} / P)^{2}\), eq. (3) | ratio | Feliciotti 2018 | yes | |
bld_convexity | Convexity | shape | \(A / A_{\mathrm{hull}}\) | ratio | Dibble et al. 2019 | yes | |
bld_rectangularity | Rectangularity | shape | \(A / A_{\mathrm{MRR}}\) | ratio | Dibble et al. 2019 | yes | |
bld_elongation | Elongation | shape | \(w_{\mathrm{MRR}} / l_{\mathrm{MRR}}\) | ratio | Gil et al. 2012 | yes | |
bld_shape_index | Shape index | shape | \(\sqrt{A / \pi} \,/\, (0.5\,\mathrm{LAL})\), eq. (4) | ratio | Fleischmann et al. 2022 | yes | |
bld_fractal | Fractal dimension | shape | \(2 \ln(P/4) / \ln A\) for \(A > 1\,\mathrm{m^2}\), eq. (5) | ratio | McGarigal & Marks 1995 | yes | |
bld_corners | Corners | shape | \(\#\{v : \theta_v \le 180^\circ - \varepsilon\}\) over exterior vertices, \(\varepsilon = 10^\circ\) | count | Steiniger et al. 2008 | yes | |
bld_squareness | Squareness | shape | \(\operatorname{mean}_{c}\, \lvert 90^\circ - \theta_c \rvert\) over the corners \(c\) (\(\varepsilon = 10^\circ\)) | \({}^\circ\) | Dibble et al. 2019 | yes | |
bld_cc_mean | Centroid-corner distance mean | shape | \(\bar d = \operatorname{mean}_{c}\, \lVert \mathbf{c} - \mathbf{g} \rVert\), \(\mathbf{g}\) the centroid, corners with \(\varepsilon = 5^\circ\) | \(\mathrm{m}\) | Schirmer & Axhausen 2016 | yes | |
bld_cc_std | Centroid-corner distance deviation | shape | \(\sigma_d = \sqrt{\operatorname{mean}_{c} (\lVert \mathbf{c} - \mathbf{g} \rVert - \bar d)^2}\) (population), \(\varepsilon = 5^\circ\) | \(\mathrm{m}\) | Schirmer & Axhausen 2016 | yes | |
bld_court_index | Courtyard index | shape | \(A_{\mathrm{court}} / A\) | ratio | Schirmer & Axhausen 2016 | yes | |
bld_facade_ratio | Facade ratio | shape | \(A / P\) | \(\mathrm{m}\) | Schirmer & Axhausen 2016 | yes | |
bld_form_factor | Form factor | shape | \((P H + A) / V^{2/3}\), eq. (6) | ratio | Bourdic et al. 2012 | yes | height |
bld_vfr | Volume to facade ratio | shape | \(V / (P H)\) | \(\mathrm{m}\) | Schirmer & Axhausen 2016 | yes | height |
bld_orientation | Orientation | distribution | \(\min(\alpha \bmod 90^\circ,\ 90^\circ - \alpha \bmod 90^\circ) \in [0^\circ, 45^\circ]\), \(\alpha\) the direction of the MRR long side | \({}^\circ\) | Schirmer & Axhausen 2016 | yes | |
bld_shared_walls | Shared walls ratio | distribution | \(\sum_j L_{ij} / P\), \(L_{ij}\) the boundary length shared with touching building \(j\) | ratio | Hamaina et al. 2012 | yes |
| Key | Label | Category | Formula | Unit | Reference | Default | Needs |
|---|---|---|---|---|---|---|---|
cell_area | Cell area | dimension | \(A_{\mathrm{cell}}\) | \(\mathrm{m^2}\) | Fleischmann et al. 2020 | yes | |
cell_circ_compact | Cell circular compactness | shape | \(A_{\mathrm{cell}} / (\pi\, r_{\mathrm{SEC}}^{2})\) | ratio | Dibble et al. 2019 | yes | |
cell_elongation | Cell elongation | shape | \(w_{\mathrm{MRR}} / l_{\mathrm{MRR}}\) of the cell | ratio | Gil et al. 2012 | yes | |
cell_orientation | Cell orientation | distribution | \(\min(\alpha \bmod 90^\circ,\ 90^\circ - \alpha \bmod 90^\circ) \in [0^\circ, 45^\circ]\), \(\alpha\) the direction of the cell MRR long side | \({}^\circ\) | Fleischmann et al. 2022 | yes | |
cell_alignment | Cell-building alignment | distribution | \(\lvert o_{\mathrm{bld}} - o_{\mathrm{cell}} \rvert\), \(o\) the orientation | \({}^\circ\) | Fleischmann et al. 2022 | yes | |
cell_coverage | Coverage ratio | intensity | \(A_{\mathrm{bld}} / A_{\mathrm{cell}}\) (0 for a cell without a building) | ratio | Schirmer & Axhausen 2016 | yes | |
cell_far | Floor area ratio | intensity | \(A_{\mathrm{bld}} \left\lfloor H / 3\,\mathrm{m} \right\rfloor / A_{\mathrm{cell}}\) (0 for a cell without a building) | ratio | Schirmer & Axhausen 2016 | yes | height |
cell_neighbours | Neighbouring cells | connectivity | \(\lvert N(i) \rvert\) (contiguity) | count | Hermosilla et al. 2012 | yes | |
cell_covered | Covered area | intensity | \(\sum_{j \in \{i\} \cup N(i)} A_{\mathrm{cell},j}\) | \(\mathrm{m^2}\) | Fleischmann et al. 2022 | yes | |
cell_reach_n | Reached cells | intensity | \(\lvert N_3(i) \rvert\), cells within 3 steps, focal cell included | count | Fleischmann et al. 2022 | yes | |
cell_reach_area | Reached area | intensity | \(\sum_{j \in N_3(i)} A_{\mathrm{cell},j}\) | \(\mathrm{m^2}\) | Fleischmann et al. 2022 | yes | |
nbr_alignment | Alignment with neighbours | distribution | \(\operatorname{mean}_{j \in N(i)} \lvert o_i - o_j \rvert\) over the neighbours \(j\) with a building | \({}^\circ\) | Gil et al. 2012 | yes | |
nbr_distance | Neighbour distance | distribution | \(\operatorname{mean}_{j \in N(i)} d(B_i, B_j)\), \(d\) the footprint-to-footprint distance | \(\mathrm{m}\) | Schirmer & Axhausen 2016 | yes | |
nbr_mibd | Mean interbuilding distance | distribution | \(\operatorname{mean}_{a, b} d(B_a, B_b)\) over all contiguous pairs \(a, b \in N_3(i)\) | \(\mathrm{m}\) | Hamaina et al. 2012 | yes | |
nbr_adjacency | Building adjacency | distribution | \(s_3(i) / n_3(i)\): joined structures (groups of touching footprints) over buildings in \(N_3(i)\) | ratio | Vanderhaegen & Canters 2017 | yes |
| Key | Label | Category | Formula | Unit | Reference | Default | Needs |
|---|---|---|---|---|---|---|---|
blk_area | Block area | dimension | \(A_{\mathrm{block}}\) (enclosure) | \(\mathrm{m^2}\) | Fleischmann et al. 2022 | yes | streets |
blk_perimeter | Block perimeter | dimension | \(P_{\mathrm{block}}\) | \(\mathrm{m}\) | Fleischmann et al. 2022 | yes | streets |
blk_circ_compact | Block circular compactness | shape | \(A_{\mathrm{block}} / (\pi\, r_{\mathrm{SEC}}^{2})\) | ratio | Dibble et al. 2019 | yes | streets |
blk_elongation | Block elongation | shape | \(w_{\mathrm{MRR}} / l_{\mathrm{MRR}}\) of the block | ratio | Gil et al. 2012 | yes | streets |
blk_cwa | Compactness-weighted axis | shape | \(\mathrm{LAL}\,(4/\pi - 16 A / P^{2})\), eq. (7) | \(\mathrm{m}\) | Dibble et al. 2019 | yes | streets |
blk_buildings | Buildings in block | intensity | \(n_{\mathrm{bld}}\): footprints whose point on surface lies in the block | count | Fleischmann et al. 2022 | yes | streets |
blk_coverage | Block coverage | intensity | \(\sum A_{\mathrm{bld}} / A_{\mathrm{block}}\) | ratio | Schirmer & Axhausen 2016 | yes | streets |
blk_cells_ha | Weighted cell count | intensity | \(n_{\mathrm{cell}} / (A_{\mathrm{block}} / 10^{4}\,\mathrm{m^2})\), cells in the block per hectare | \(\mathrm{ha^{-1}}\) | Fleischmann et al. 2022 | yes | streets |
| Key | Label | Category | Formula | Unit | Reference | Default | Needs |
|---|---|---|---|---|---|---|---|
str_length | Segment length | dimension | \(L\) | \(\mathrm{m}\) | Fleischmann et al. 2022 | yes | streets |
str_linearity | Linearity | shape | \(\lVert \mathbf{p}_{\mathrm{end}} - \mathbf{p}_{\mathrm{start}} \rVert / L\) | ratio | Araldi & Fusco 2019 | yes | streets |
str_width | Street profile width | dimension | \(\bar w = \frac{1}{m} \sum_{t} (d^{\mathrm{L}}_t + d^{\mathrm{R}}_t)\), eq. (8) | \(\mathrm{m}\) | Araldi & Fusco 2019 | yes | streets |
str_width_dev | Profile width deviation | diversity | \(\sigma_w\) (population) of the tick widths \(w_t = d^{\mathrm{L}}_t + d^{\mathrm{R}}_t\) | \(\mathrm{m}\) | Araldi & Fusco 2019 | yes | streets |
str_openness | Profile openness | intensity | \(\#\{\text{tick sides without a facade within } 25\,\mathrm{m}\} / 2m\) | ratio | Araldi & Fusco 2019 | yes | streets |
str_height | Profile height | dimension | \(\bar h\): mean height of the facades hit by the ticks | \(\mathrm{m}\) | Araldi & Fusco 2019 | yes | streets, height |
str_hw | Height-to-width ratio | shape | \(\bar h / \bar w\) | ratio | Araldi & Fusco 2019 | yes | streets, height |
str_buildings | Buildings along | intensity | \(n_{\mathrm{bld}}\): buildings whose nearest segment it is | count | Fleischmann et al. 2022 | yes | streets |
str_reach_cells | Cells reached | intensity | \(n_{\mathrm{cell}}\): cells attached to the segment | count | Fleischmann et al. 2022 | yes | streets |
| Key | Label | Category | Formula | Unit | Reference | Default | Needs |
|---|---|---|---|---|---|---|---|
node_degree | Node degree | connectivity | \(\deg(u)\): number of segment ends at the node | count | Porta et al. 2006 | yes | streets |
node_mean_dist | Mean node distance | dimension | \(\frac{1}{\deg(u)} \sum_{e \ni u} L_e\) | \(\mathrm{m}\) | Fleischmann et al. 2022 | yes | streets |
node_meshedness | Local meshedness | connectivity | \((e - v + 1) / (2v - 5)\) in \(G_5(u)\), eq. (9) | ratio | Buhl et al. 2006; Feliciotti 2018 | yes | streets |
node_gamma | Local gamma | connectivity | \(e / (3(v - 2))\) in \(G_5(u)\), eq. (10) | ratio | Kansky 1963 | yes | streets |
node_cds_share | Cul-de-sac share | connectivity | \(\#\{w \in G_5(u) : \deg(w) = 1\} / v\), \(\deg\) taken in the whole network | ratio | Boeing 2017 | yes | streets |
node_closeness | Local closeness | connectivity | \((v - 1) / \sum_{w \in G_5(u)} d_L(u, w)\), eq. (11) | \(\mathrm{m^{-1}}\) | Porta et al. 2006 | yes | streets |
bld_area, bld_perimeter, bld_lal, bld_eri, bld_circ_compact, bld_elongation, bld_convexity, bld_corners, bld_orientation, bld_shared_walls, bld_court_index, bld_height, cell_area, cell_coverage, cell_alignment, nbr_distance, nbr_adjacency, nbr_mibd, str_width, node_meshednessbld_eri, bld_circ_compact, bld_sq_compact, bld_convexity, bld_rectangularity, bld_elongation, bld_shape_index, bld_fractal, bld_corners, bld_squareness, bld_cc_mean, bld_cc_std, bld_court_index, bld_facade_ratio, bld_form_factor, bld_vfr, cell_circ_compact, cell_elongation, blk_circ_compact, blk_elongation, blk_cwa, str_linearity, str_hwstr_length, str_linearity, str_width, str_width_dev, str_openness, str_height, str_hw, str_buildings, str_reach_cells, node_degree, node_mean_dist, node_meshedness, node_gamma, node_cds_share, node_closenessHow non-cell characters reach the cells: building characters through the cell's uid; block characters through the enclosure containing the building; street-segment characters through the segment nearest to the building (or to the cell for empty cells); node characters through that segment's end nearer to the building.
For every character \(x\) and every cell \(i\), the neighbourhood \(N_k(i)\) is the cell itself and every cell reachable in at most \(k\) steps of queen (shared vertex) or rook (shared edge) contiguity:
\[ N_k(i) = \{i\} \cup \{\, j : \delta(i, j) \le k \,\} \tag{12} \]where \(\delta(i, j)\) is the number of contiguity steps on the shortest path from \(i\) to \(j\). The statistics are computed over the \(n\) non-NULL values \(x_j\), \(j \in N_k(i)\), and written as <key>_<suffix>. \(Q_p\) is the \(p\)-th percentile with linear interpolation and \(\mu = \bar x\) the neighbourhood mean.
where \(p_b\) is the share of the neighbourhood values that fall in bin \(b\) and the \(B \le 7\) bins are cut at the 7-quantiles of \(x\) over the whole layer (coinciding cut points are merged, so \(B\) can be smaller than 7).
\[ T = \frac{1}{n} \sum_{j=1}^{n} \frac{x_j}{\mu} \ln \frac{x_j}{\mu} \tag{15} \] \[ G = \frac{\sum_{j=1}^{n} \sum_{l=1}^{n} \lvert x_j - x_l \rvert}{2 n^{2} \mu} = \frac{2 \sum_{r=1}^{n} r\, x_{(r)}}{n \sum_{j} x_j} - \frac{n + 1}{n} \tag{16} \]where \(x_{(r)}\) is the \(r\)-th smallest value; \(0 \ln 0 = 0\) in (15). \(T\) and \(G\) are NULL when a neighbourhood holds a negative value, \(T\) also when \(\mu = 0\); \(G = 0\) when all values are 0. The second form of (16) is the one computed.
| Statistic | Suffix | Formula | Reference |
|---|---|---|---|
| mean | _mean | \(\bar x = \frac{1}{n}\sum_j x_j\) | Fleischmann et al. 2022 |
| median | _med | \(Q_{50}\) | Fleischmann et al. 2022 |
| interquartile range | _iqr | \(Q_{75} - Q_{25}\) (linear interpolation), eq. (13) | Fleischmann et al. 2022 |
| interdecile range | _idr | \(Q_{90} - Q_{10}\), eq. (13) | Fleischmann et al. 2022 |
| Simpson diversity | _simp | \(1 - \sum_{b} p_b^{2}\) over at most 7 quantile bins of \(x\) over the whole layer, eq. (14) | Simpson 1949 |
| Theil index | _theil | \(\frac{1}{n} \sum_j \frac{x_j}{\mu} \ln \frac{x_j}{\mu}\), \(\mu\) the mean; non-negative values, eq. (15) | Theil 1967 |
| Gini coefficient | _gini | \(\sum_{j,l} \lvert x_j - x_l \rvert / (2 n^{2} \mu)\); non-negative values, eq. (16) | Gini 1912 |
Defaults: queen contiguity, order \(k = 3\), statistics mean, IQR and Simpson. Characters that are constant or empty on the data are kept in the layers but not used for clustering (the log lists them).
| Diagnostic | Formula | Better | Reference |
|---|---|---|---|
| Within-cluster sum of squares | \(W_k = \sum_{c} \sum_{i \in c} \lVert \mathbf{y}_i - \boldsymbol{\mu}_c \rVert^{2}\), eq. (20) | elbow | MacQueen 1967; Satopaa et al. 2011 |
| Silhouette | \(\bar s = \frac{1}{n}\sum_i s_i\), eq. (22) (seeded sample of 4 000) | higher | Rousseeuw 1987 |
| Calinski-Harabasz | \(\dfrac{B / (k - 1)}{W_k / (n - k)}\), eq. (23) | higher | Calinski & Harabasz 1974 |
| Davies-Bouldin | \(\frac{1}{k} \sum_{c} \max_{c' \ne c} \frac{S_c + S_{c'}}{\lVert \boldsymbol{\mu}_c - \boldsymbol{\mu}_{c'} \rVert}\), eq. (24) | lower | Davies & Bouldin 1979 |
where \(c(i)\) is the cluster of cell \(i\), \(n_c\) the size of cluster \(c\), \(\boldsymbol{\mu}\) the overall mean, \(n\) the number of cells, and distances are Euclidean in the PCA space; \(s_i = 0\) for a cell alone in its cluster. Higher \(\bar s\) and CH and lower DB mean better separated types.
uid, cell_id, eid (enclosed mode), src_id (when the id field is not integer), every primary character, every contextual column, cluster (\(1, \dots, k\)), cluster_name and cluster_margin \(m_i\), eq. (25): 1 at the type centre, 0 when the cell is as far from its own centre as from the nearest other one, negative when it lies nearer another type's centre (possible with Ward), so low values mark ambiguous fabric at type boundaries.
\[ m_i = \frac{b_i - a_i}{\max(a_i, b_i)}, \qquad a_i = \lVert \mathbf{y}_i - \boldsymbol{\mu}_{c(i)} \rVert, \quad b_i = \min_{c \ne c(i)} \lVert \mathbf{y}_i - \boldsymbol{\mu}_c \rVert \tag{25} \]
where \(\mathbf{y}_i\) is the cell's PCA score vector and \(\boldsymbol{\mu}_c\) the centroid of type \(c\) (the centroid analogue of the silhouette, eq. (22)).uid, the building characters, cluster, cluster_name.edge_id, node_u, node_v, segment characters.node_id, node characters.block_id, block characters.*_types.csv, written with the CSV export): one row per type with cluster, name, colour, cells, area_share and median_<character> for every profiled character.Load demo town builds a deterministic synthetic town in EPSG:32635, far from the projection origin: a \(9 \times 6\) grid of 140 m street blocks (120 m block plus a 20 m road reserve), grouped into six districts of \(3 \times 3\) blocks, one planted fabric per district: perimeter blocks, detached houses, slab estate, towers, industrial sheds and a historic core. It has 1 735 buildings with heights (field height), ids (bid) and the truth in fabric, 123 street lines and one limit polygon.
bid and height; the badge reads Working CRS EPSG:32635 (input CRS kept, metres).fabric: 0.82.The same in Processing: run Urban morphometrics lab (whole chain) with Buildings = Demo buildings, Streets = Demo streets, id field bid, height field height, and a file for the HTML report. The result dictionary holds CHOSEN_K \(= 5\) and CELL_COUNT \(= 1735\).
The demo town was used to check how well the default chain recovers the six planted fabrics, and whether a different default does better. Purity is the share of a type's buildings that belong to its most common planted fabric, \(\max_f n_{cf} / n_c\); ARI is the adjusted Rand index between types and fabrics over the buildings (Hubert & Arabie 1985), \(\mathrm{ARI} = (\mathrm{RI} - \mathrm{E}[\mathrm{RI}]) / (\max \mathrm{RI} - \mathrm{E}[\mathrm{RI}])\), 1 for identical partitions and about 0 for random ones.
| Setting (others default) | \(k\) chosen | ARI | Lowest type purity | Industrial fabric |
|---|---|---|---|---|
| Default: morphological, queen order 3, mean / IQR / Simpson, z-scores, k-means | 5 | 0.82 | 0.35 (mixed edge type) | 52 percent in the mixed type, 37 percent with towers |
| Enclosed tessellation | 5 | 0.85 | 0.18 | split |
| Enclosed, order 2 | 6 | 0.93 | 0.23 | split |
| \(k\) forced to 6 | 6 | 0.82 | 0.35 | split |
| Robust standardisation | 4 | 0.43 | 0.33 | split |
| Ward | 5 | 0.71 | 0.40 | split |
| Order 2 | 5 | 0.85 | 0.38 | split |
| Order 1 | 5 | 0.93 | 0.31 | 70 percent with perimeter blocks |
| Statistic mean only | 5 (4 with seed 1) | 0.90 (0.89) | 0.69 | merged with towers or perimeter blocks |
| Order 2, mean only | 5 | 0.94 | 0.67 | 82 percent with perimeter blocks |
| Order 1, mean only | 6 | 0.95 | 0.62 | 94 percent with perimeter blocks; detached houses split in two |
| \(k\) forced to 7 or 8 | 7, 8 | 0.53, 0.51 | 0.29, 0.30 | split; the extra types divide the historic core and the detached houses |
| Log transform of right-skewed, non-negative columns (skewness above 1) before the z-scores | 5 | 0.78 | 0.40 | split |
| Log transform, mean only | 5 | 0.84 | 0.63 | 52 percent with towers |
Outcome. No setting tried recovers all six planted fabrics as six types. The 0.35 type of the default run is not noise: the dispersion statistics (IQR, Simpson) are high wherever two fabrics meet, so cells along district edges form their own transitional type, together with part of the industrial district, whose few large sheds (71 of 1 735 buildings) are too few to anchor a type of their own. Dropping the dispersion statistics or shrinking the neighbourhood removes the edge type and raises the ARI, but the industrial sheds then merge with the perimeter blocks or the towers, the chosen \(k\) becomes less stable across seeds, and the description of heterogeneity that the method of Fleischmann et al. (2022) relies on is lost. Enclosed tessellation does not help on this grid. Height and volume characters are already in the default set whenever a height field is given, so they are not a missing input. Raising \(k\) to 7 or 8 splits the largest fabrics before the industrial cells form a type, and a log transform of the skewed size columns does not separate them either: on this town the limit is the size of the industrial district, not the character set. The defaults are therefore kept.
Practical guidance: on a small study area with sharp boundaries between homogeneous fabrics (planned districts, synthetic data) try context order 1 or 2 with the mean statistic alone; on real, gradually changing urban fabric keep the defaults and read a mixed type as a transition zone. Compare the silhouette and Davies-Bouldin curves with the elbow before accepting \(k\).
Other limitations: each footprint is one feature (a multi-part footprint is one building); street characters assume a connected centre-line network (lines are noded at every crossing); the number of types is a modelling decision that the diagnostics support but do not replace.
Eminoğlu, Y. (2026). 02Morphometrics - Urban Morphometrics Lab (version 0.1.2) [QGIS plugin]. https://gitlab.com/geophilo1/zero2morphometrics. https://doi.org/10.5281/zenodo.24263495. The DOI 10.5281/zenodo.24263495 always resolves to the latest version; version 0.1.2 has DOI https://doi.org/10.5281/zenodo.24263496. Please also cite Fleischmann et al. (2022) and the references of the characters you use.
Licence: GPL-2.0-or-later. Copyright (C) 2026 Yusuf Eminoğlu (Geophilo).
Repository: gitlab.com/geophilo1/zero2morphometrics · Issues: work items · Homepage: geophilo.com/zero2morphometrics