{"name": "Zapisz projekt do GPKG (warstwy i style)", "package_name": "zapisz_projekt_gpkg", "description": "Dwuj\u0119zyczna (PL/EN). Zapisuje wybrane warstwy projektu do jednego pliku GeoPackage razem z symbolizacj\u0105 (styl domy\u015blny w GPKG) i kolejno\u015bci\u0105 warstw. / Bilingual (PL/EN). Exports selected layers to a single GeoPackage with embedded default styles and preserved layer order, your entire project in one file.", "about": "*** ENG description below ***\n.\nWTYCZKA DWUJ\u0118ZYCZNA: POLSKI I ANGIELSKI\nJ\u0119zyk interfejsu ustawia si\u0119 sam wed\u0142ug j\u0119zyka QGIS, a w prawym g\u00f3rnym rogu okna jest prze\u0142\u0105cznik PL/EN. Wyb\u00f3r jest zapami\u0119tywany.\n.\nCa\u0142y projekt w jednym pliku, bez zgubionej symbolizacji. Wtyczka zapisuje wybrane warstwy wektorowe do JEDNEGO pliku GeoPackage (.gpkg) razem z ich kolorami, etykietami i stylami, zachowuj\u0105c kolejno\u015b\u0107 warstw z panelu.\n.\nDLACZEGO TO WYGODNE:\n- jeden plik .gpkg zamiast dziesi\u0105tek shapefile'ow, wysy\u0142asz mailem jak zwyk\u0142y za\u0142\u0105cznik,\n- symbolizacja jest osadzona W \u015aRODKU pliku jako styl domy\u015blny, odbiorca po przeci\u0105gni\u0119ciu pliku do QGIS widzi map\u0119 dok\u0142adnie tak\u0105 jak u Ciebie,\n- koniec z klasycznym problemem \"po eksporcie wszystko szare\",\n- opcjonalnie w pliku osadzany jest te\u017c ca\u0142y projekt QGIS (kolejno\u015b\u0107 i widoczno\u015b\u0107 warstw), odbiorca otwiera go przez Projekt > Otw\u00f3rz z > GeoPackage.\n.\nWYB\u00d3R WARSTW:\n- tylko wy\u015bwietlane warstwy (domy\u015blnie),\n- wszystkie warstwy projektu,\n- r\u0119czny wyb\u00f3r z listy z ptaszkami (z przyciskami zaznacz/odznacz wszystkie).\n.\nDODATKOWO:\n- kolejno\u015b\u0107 warstw na mapie i na li\u015bcie zostaje zachowana,\n- nazwy warstw s\u0105 automatycznie czyszczone i unikalne,\n- warstwy rastrowe s\u0105 grzecznie pomijane (z informacj\u0105 w logu),\n- pasek post\u0119pu i czytelny log w wybranym j\u0119zyku.\n.\n*** ENGLISH ***\nA BILINGUAL PLUGIN: POLISH AND ENGLISH\nThe interface language follows the QGIS language by itself, and a PL/EN switch sits in the top right corner of the window. The choice is remembered.\n.\nYOUR ENTIRE PROJECT IN ONE FILE, WITH SYMBOLOGY PRESERVED\nThe plugin exports selected vector layers to a single GeoPackage file (.gpkg) together with their colors, labels, and styles. Styles are embedded directly in the GeoPackage and set as default styles. As a result, when the recipient drags the file into QGIS, the map is displayed with the same symbology as in the original project. The layer order is preserved. Optionally, the complete QGIS project can also be stored inside the GeoPackage.\n.\nWHY IT IS CONVENIENT:\n- one .gpkg file instead of dozens of shapefiles, send it by e-mail like a regular attachment,\n- symbology travels inside the file as the default style, no more grey layers after an export,\n- the whole QGIS project (layer order and visibility) can be embedded in the same file and opened with Project > Open From > GeoPackage.\n.\nLAYER SELECTION:\n- visible layers only (default),\n- all project layers,\n- manual selection from a checklist (with select/deselect all buttons).\n.\nHOW TO USE:\n1. Open your QGIS project and click the plugin button.\n2. Select the location where the .gpkg file should be saved.\n3. Select the layers to export.\n4. Click SAVE TO GPKG and monitor the progress bar.\n.\nHOW TO OPEN THE FILE:\n- Drag the .gpkg file into the QGIS window, the layers will be loaded with their predefined symbology.\n- Or select Project > Open From > GeoPackage to open the complete project layout with a single action.\n.\nNOTES:\n- Only vector layers are exported; raster layers are skipped and reported in the log.\n- An existing file with the same name will be overwritten after confirmation.\n- Layer names are sanitized and made unique automatically.\n- QGIS 3.16 or later is required; no additional software or dependencies are needed.", "homepage": "https://github.com/gorniakgrzegorz/zapisz_projekt_gpkg", "repository": "https://github.com/gorniakgrzegorz/zapisz_projekt_gpkg", "tracker": "https://github.com/gorniakgrzegorz/zapisz_projekt_gpkg/issues", "author": "Grzegorz Gorniak", "tags": ["vector", "package", "share", "save", "project", "styl", "projekt", "symbolizacja", "layers", "jeden plik", "eksport", "single file", "wektor", "qml", "layer_styles", "warstwy", "zapis", "style", "geopackage", "gpkg", "export", "symbology", "styles", "udostepnianie", "bilingual", "dwujezyczna", "polish", "english"], "downloads": 463, "latest_version": "1.0.0", "versions": [{"version": "1.0.0", "experimental": false, "qgis_min": "3.16.0", "qgis_max": "3.99.0", "downloads": 463, "uploaded_by": "gorniakgrzegorz", "upload_datetime": "2026-07-21T12:39:04.264875"}]}