{"name": "Road Furniture Designer", "package_name": "road_furniture_designer", "version": "0.12.1", "experimental": false, "qgis_min": "3.44.0", "qgis_max": "4.99.0", "downloads": 23, "uploaded_by": "EdmondAkello", "upload_datetime": "2026-11-13T14:03:58.435702", "changelog": "0.12.1\n- No bundled libraries: Excel workbooks and DXF drawings are written by the plugin itself (same content as before), so the ZIP passes the plugin repository's security scan without configuration files; the DXF export is also about three times faster.\n- Broken markings show their dashes in Civil 3D (linetype generation on the marking polylines).\n0.12.0\n- QGIS 4 (Qt6): runs on QGIS 3.44 to 4.x; QGIS 3.34 to 3.42 are no longer supported.\n- Much faster auto-placement: Propose no longer rebuilds the inventory once per sign (850 signs on a 36 km road: 317 s to 2 s); barrier proposals and points on spirals are faster too.\n- Busy cursor while Propose runs; the vendored Qt viewers of ezdxf and fontTools are left out of the plugin.\n0.11.2\n- The user guide PDF ships with the plugin: the Guide button opens it without a connection.\n0.11.1\n- Release from the right commit (the v0.11.0 tag pointed at 0.10), with the LICENSE in the plugin ZIP and the Guide button's link working; listed as stable.\n0.11.0\n- Descents: descending lanes, brake check areas and truck escape ramps proposed from the profile (RDM 1.3 6.6.4, 12.5, 12.7), ramp beds from Equation 12.1, ramps kept clear of the road where it bends towards them.\n- Properties table with departures from the RDM drawings and their reasons; drag bay, lane and ramp ends; undo and redo; the clicked main road snaps to a QGIS road layer.\n- Feature lines for Civil 3D include junction, access and roundabout kerbs and escape-ramp edges; furniture checks on the Outputs tab.\n- Fixes: a proposal step with nothing to propose no longer leaves the sign layer unreadable; the strip diagram's centre line sits between the edge lines.\n0.10.0\n- Centreline-only LandXML: typical section by chainage range (Section tab; RDM 1.3 Tables 4.23 / 4.24 standards), superelevation from the LandXML, embankment fills from the profiles, side roads, sections saved to file.\n- Feature lines for Civil 3D: road edges and widenings as LandXML feature lines (arcs, elevation points), checked against Civil 3D's own corridor feature lines.\n- Tabs by job (Section, Signs, Auto, Linear, Calming, Speed limits, Junctions + bays, Outputs); the dock opens beside the Processing Toolbox; Accept all proposals covers the linear ones.\n0.9.0\n- Islands come with their widenings (ghost-island widening, corner bellmouths, minor road flare); lanes keep their width.\n- Signalised crossroads (SIG), Junction Ahead warning signs (W1 / W2 / W5 / W11 / W12, W46), junction arrow markings, minor road approach splay, BUS STOP word marking, three-centred kerb returns, move a junction piece.\n- Markings drawn as painted (real dash lengths, double and combined lines); raised crossings as their own item; humps without bar sets; overlap checks.\n- Climbing lanes over the speed profile; roundabout entry path radius check.\n- Fixes: junction leg where our road joins a continuous road, climbing lanes on rolling roads, QGIS 3.34 load and crash.\n- Needs QGIS 3.34 or later.\n0.8.0\n- Junctions: islands and markings from RDM/1/3/2/01-02 placed with two clicks, visibility splays (RDM 1.3 9.5.4) checked on the profile and against QGIS layers, our road as the minor road.\n- Roundabouts (RDM 1.3 Chapter 10, RDM 6.1 Figures 7.14-7.16), private accesses (9.11.16), bus and truck bays and climbing lanes, with the Civil 3D widening table and round-trip check.\n- Supplementary signs from WSCM/84/2/01 (270 signs).\n- Faster sign placement (one edit session per batch).\n- Markings and road studs (RDM 6.1), embankment barriers (RDM 1.3 Chapter 12), traffic calming and crossings (RDM 6.4), drawing of linear furniture by hand.\n- Speed limit zones (RDM 6.2 3.5) with limit signs, repeaters and P9.\n- Report: strip diagram, marking, barrier and feature schedules, linear quantities and furniture checks, including start/end sign pairs; plan sheets draw linear furniture.\n- Design criteria from RDM 1.3 (2025) as open criteria files.\n- Catalogue: END plate for the end of no overtaking, P22, IM16-IM18, RW41 (251 signs).\n- Fixes: duplicate chevrons and plates when auto-placement is run again; plan sheets with a second alignment.", "external_deps": null, "download_url": "https://plugins.qgis.org/plugins/road_furniture_designer/version/0.12.1/download/"}