[general]
name=Road Furniture Designer
qgisMinimumVersion=3.44
qgisMaximumVersion=4.99
description=Road furniture along a Civil 3D LandXML alignment to the Kenya Road Design Manual (2025): traffic signs, markings and road studs, safety barriers, traffic calming, crossings and speed limit zones, placed by hand or proposed from the geometry, with a live inventory, reports and a georeferenced DXF for Civil 3D.
version=0.12.1
author=Edmond Akello
email=francenicklaus@gmail.com
about=Design road furniture in QGIS next to the road alignment.

    Signs: click to place, or let the RDM 6.2 rules propose curve and grade warnings, chevrons and no-overtaking signs from the alignment's curves, grades and sight distances. Chainage, offset, side and facing come from the alignment and stay up to date when signs move. Speed limit zones are signed with limit signs, repeaters and end signs.

    Linear furniture: centre lines, edge lines and road studs from RDM 6.1 on the same no-overtaking basis as the signs; embankment barriers from the corridor sections and RDM 1.3 Chapter 12; humps, speed tables, bar markings and zebra crossings detailed to RDM 6.4 with their signs. Everything can also be drawn by hand.

    Junctions and widenings: junction islands, arrows and markings from the standard drawings, with the widenings they need and visibility splays checked against QGIS layers; a signalised crossroads; Junction Ahead warning signs; roundabouts (RDM 1.3 Chapter 10); private accesses; bus and truck bays, climbing and descending lanes, brake check areas and truck escape ramps (RDM 1.3 12.5, 12.7) proposed from the profile, with a widening table for Civil 3D and a check against the corridor when the LandXML comes back.

    Centreline-only LandXML: with only the alignment and its design and existing ground profiles, a typical section (RDM 1.3 standard sections or your own, by chainage range, superelevated from the LandXML) gives the road edges every tool uses, and the edges and widenings go back to Civil 3D as 3D feature lines.

    Outputs: a live inventory (Excel Tables and CSV) for the QTO; an A3 report with plan, long-section and strip sheets, schedules and checks of the furniture against the geometry; a georeferenced DXF that pastes into Civil 3D at true coordinates. Design criteria are open data files (Kenya RDM 2025 by default; AASHTO 2011 included).

    User Guide and Technical Manual (every tab, the report and its checks, and the methods, with figures): https://github.com/EdmondAkello/Road-Furniture-Designer/tree/main/docs/user-guide (PDF edition for each version). In QGIS: the Guide button on the dock, or Plugins > Road Furniture Designer > User Guide and Technical Manual.

    Runs on QGIS 3.44 and QGIS 4 (Qt5 and Qt6).

    Licensed under the GNU General Public License version 2 or later.
changelog=0.12.1
    - No bundled libraries: Excel workbooks and DXF drawings are written by the plugin itself (same content as before), so the ZIP passes the plugin repository's security scan without configuration files; the DXF export is also about three times faster.
    - Broken markings show their dashes in Civil 3D (linetype generation on the marking polylines).
    0.12.0
    - QGIS 4 (Qt6): runs on QGIS 3.44 to 4.x; QGIS 3.34 to 3.42 are no longer supported.
    - Much faster auto-placement: Propose no longer rebuilds the inventory once per sign (850 signs on a 36 km road: 317 s to 2 s); barrier proposals and points on spirals are faster too.
    - Busy cursor while Propose runs; the vendored Qt viewers of ezdxf and fontTools are left out of the plugin.
    0.11.2
    - The user guide PDF ships with the plugin: the Guide button opens it without a connection.
    0.11.1
    - Release from the right commit (the v0.11.0 tag pointed at 0.10), with the LICENSE in the plugin ZIP and the Guide button's link working; listed as stable.
    0.11.0
    - Descents: descending lanes, brake check areas and truck escape ramps proposed from the profile (RDM 1.3 6.6.4, 12.5, 12.7), ramp beds from Equation 12.1, ramps kept clear of the road where it bends towards them.
    - Properties table with departures from the RDM drawings and their reasons; drag bay, lane and ramp ends; undo and redo; the clicked main road snaps to a QGIS road layer.
    - Feature lines for Civil 3D include junction, access and roundabout kerbs and escape-ramp edges; furniture checks on the Outputs tab.
    - Fixes: a proposal step with nothing to propose no longer leaves the sign layer unreadable; the strip diagram's centre line sits between the edge lines.
    0.10.0
    - Centreline-only LandXML: typical section by chainage range (Section tab; RDM 1.3 Tables 4.23 / 4.24 standards), superelevation from the LandXML, embankment fills from the profiles, side roads, sections saved to file.
    - Feature lines for Civil 3D: road edges and widenings as LandXML feature lines (arcs, elevation points), checked against Civil 3D's own corridor feature lines.
    - Tabs by job (Section, Signs, Auto, Linear, Calming, Speed limits, Junctions + bays, Outputs); the dock opens beside the Processing Toolbox; Accept all proposals covers the linear ones.
    0.9.0
    - Islands come with their widenings (ghost-island widening, corner bellmouths, minor road flare); lanes keep their width.
    - Signalised crossroads (SIG), Junction Ahead warning signs (W1 / W2 / W5 / W11 / W12, W46), junction arrow markings, minor road approach splay, BUS STOP word marking, three-centred kerb returns, move a junction piece.
    - Markings drawn as painted (real dash lengths, double and combined lines); raised crossings as their own item; humps without bar sets; overlap checks.
    - Climbing lanes over the speed profile; roundabout entry path radius check.
    - Fixes: junction leg where our road joins a continuous road, climbing lanes on rolling roads, QGIS 3.34 load and crash.
    - Needs QGIS 3.34 or later.
    0.8.0
    - Junctions: islands and markings from RDM/1/3/2/01-02 placed with two clicks, visibility splays (RDM 1.3 9.5.4) checked on the profile and against QGIS layers, our road as the minor road.
    - Roundabouts (RDM 1.3 Chapter 10, RDM 6.1 Figures 7.14-7.16), private accesses (9.11.16), bus and truck bays and climbing lanes, with the Civil 3D widening table and round-trip check.
    - Supplementary signs from WSCM/84/2/01 (270 signs).
    - Faster sign placement (one edit session per batch).
    - Markings and road studs (RDM 6.1), embankment barriers (RDM 1.3 Chapter 12), traffic calming and crossings (RDM 6.4), drawing of linear furniture by hand.
    - Speed limit zones (RDM 6.2 3.5) with limit signs, repeaters and P9.
    - Report: strip diagram, marking, barrier and feature schedules, linear quantities and furniture checks, including start/end sign pairs; plan sheets draw linear furniture.
    - Design criteria from RDM 1.3 (2025) as open criteria files.
    - Catalogue: END plate for the end of no overtaking, P22, IM16-IM18, RW41 (251 signs).
    - Fixes: duplicate chevrons and plates when auto-placement is run again; plan sheets with a second alignment.
experimental=False
deprecated=False
category=Vector
icon=icon.svg
repository=https://github.com/EdmondAkello/Road-Furniture-Designer
tracker=https://github.com/EdmondAkello/Road-Furniture-Designer/issues
homepage=https://github.com/EdmondAkello/Road-Furniture-Designer
tags=road design, traffic signs, road furniture, LandXML, Civil 3D, Kenya, RDM
