{
  "ts||Rectangle size||fr": "Taille du rectangle",
  "ts||Give a size in m:||fr": "Donnez une taille en m :",
  "ts||Width:||fr": "Largeur:",
  "ts||Height:||fr": "Hauteur:",
  "ts||Radius||fr": "Rayon",
  "ts||Give a radius in m:||fr": "Donnez un rayon en m :",
  "ts||DMS Point Tool||fr": "Outil de points DMS",
  "ts||Latitude||fr": "Latitude",
  "ts||Longitude||fr": "Longitude",
  "ts||Degrees||fr": "Degrés",
  "ts||Minutes||fr": "Minutes",
  "ts||Seconds||fr": "Secondes",
  "ts||Direction||fr": "Direction",
  "ts||XY Point drawing tool||fr": "Outil de dessin de points XY",
  "ts||Selection made in %1 perimeter||fr": "Sélection effectuée dans le périmètre %1",
  "ts||Save this tab's results||fr": "Enregistrer les résultats de cet onglet",
  "ts||Save all results||fr": "Enregistrer tous les résultats",
  "ts||Export the selection as a memory layer||fr": "Exporter la sélection sous forme de couche mémoire",
  "ts||Export all tabs as a memory layer||fr": "Exporter tous les onglets en tant que couche mémoire",
  "ts||Zoom to selected attributes||fr": "Zoom sur les attributs sélectionnés",
  "ts||Highlight feature's geometry||fr": "Mettre en surbrillance la géométrie de l'entité",
  "ts||Settings||fr": "Paramètres",
  "ts||Loading...||fr": "Chargement...",
  "ts||Rename window||fr": "Renommer la fenêtre",
  "ts||Enter a new title:||fr": "Saisissez un nouveau titre :",
  "ts||Highlight feature's centroid||fr": "Mettre en surbrillance le centre de gravité de l'entité",
  "ts||Extracts in {name}||fr": "Extraits dans {name}",
  "ts||Session||fr": "Session",
  "ts||Extract {title}||fr": "Extraire {title}",
  "ts||Tab {index}||fr": "Onglet {index}",
  "ts||Extract {}||fr": "Extraire {}",
  "ts||Extracts in {}||fr": "Extraits dans {}",
  "ts||No items were selected||fr": "Aucun élément n'a été sélectionné",
  "ts||Selected items: {nb} Area: {area} m²||fr": "Éléments sélectionnés : {nb} Superficie : {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||fr": "Articles sélectionnés : {nb} - Longueur : {lenght}m",
  "ts||Selected items: {nb}||fr": "Éléments sélectionnés : {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||fr": "[highlight_features] Échec de la mise à jour de la barre d'état : {e_sb}",
  "ts||Apply||fr": "Appliquer",
  "ts||Cancel||fr": "Annuler",
  "ts||Sheet||fr": "Feuille",
  "ts||Error||fr": "Erreur",
  "ts||Cannot create export folder.||fr": "Impossible de créer un dossier d'exportation.",
  "ts||Selection made in||fr": "Sélection effectuée en",
  "ts||Information||fr": "Information",
  "ts||No active tab found.||fr": "Aucun onglet actif trouvé.",
  "ts||No data to save.||fr": "Aucune donnée à sauvegarder.",
  "ts||Save in...||fr": "Enregistrer dans...",
  "ts||OpenDocument Spreadsheet (*.ods)||fr": "Feuille de calcul OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||fr": "Impossible de remplacer le fichier existant.",
  "ts||Please close it if it is open in another application, then try again.||fr": "Veuillez le fermer s'il est ouvert dans une autre application, puis réessayer.",
  "ts||{path}||fr": "{path}",
  "ts||Unable to write file:||fr": "Impossible d'écrire le fichier :",
  "ts||{e_rep}||fr": "{e_rep}",
  "ts||Open file?||fr": "Ouvrir le fichier ?",
  "ts||ODS workbook created successfully:||fr": "Classeur ODS créé avec succès :",
  "ts||Open||fr": "Ouvrir",
  "ts||Unable to open the ODS file automatically:||fr": "Impossible d'ouvrir automatiquement le fichier ODS :",
  "ts||{e_open}||fr": "{e_open}",
  "ts||Give a name to the item:||fr": "Donnez un nom à l'élément :",
  "ts||Name…||fr": "Nom…",
  "ts||Text…||fr": "Texte…",
  "ts||Drawing||fr": "Dessin",
  "ts||Add text||fr": "Ajouter du texte",
  "ts||Type the text to display:||fr": "Tapez le texte à afficher :",
  "ts||Add point||fr": "Ajouter un point",
  "ts||Give a name to the point:||fr": "Donnez un nom au point :",
  "ts||Point…||fr": "Indiquer…",
  "ts||Add line||fr": "Ajouter une ligne",
  "ts||Give a name to the line:||fr": "Donnez un nom à la ligne :",
  "ts||Line…||fr": "Doubler…",
  "ts||Add polygon||fr": "Ajouter un polygone",
  "ts||Give a name to the polygon:||fr": "Donnez un nom au polygone :",
  "ts||Polygon…||fr": "Polygone…",
  "ts||Buffer selection||fr": "Sélection du tampon",
  "ts||Name this selection (buffer):||fr": "Nommez cette sélection (tampon) :",
  "ts||Buffer…||fr": "Tampon…",
  "ts||Add to an existing layer||fr": "Ajouter à un calque existant",
  "ts||Selecting...||fr": "Sélection...",
  "ts||Pass||fr": "Passer",
  "ts||Drawings||fr": "Dessins",
  "ts||DMS Point drawing tool||fr": "Outil de dessin de points DMS",
  "ts||Text drawing tool||fr": "Outil de dessin de texte",
  "ts||Point drawing tool||fr": "Outil de dessin de points",
  "ts||Line drawing tool||fr": "Outil de dessin de lignes",
  "ts||Rectangle drawing tool||fr": "Outil de dessin de rectangles",
  "ts||Circle drawing tool||fr": "Outil de dessin de cercle",
  "ts||Polygon drawing tool||fr": "Outil de dessin de polygone",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||fr": "Dessin tampon avec sélection polygonale d'objets dans le calque sélectionné",
  "ts||Buffer drawing on objects in selected layer||fr": "Dessin de tampon sur les objets du calque sélectionné",
  "ts||Install the Gestion_crise plugin||fr": "Install the Gestion_crise plugin",
  "ts||Help / User manual||fr": "Aide / Manuel d'utilisation",
  "ts||No selection||fr": "Aucune sélection",
  "ts||No selected items found in visible vector layers.||fr": "Aucun élément sélectionné trouvé dans les calques vectoriels visibles.",
  "ts||XY point drawing tool||fr": "Outil de dessin de points XY",
  "ts||DMS point drawing tool||fr": "Outil de dessin de points DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||fr": "Saisie incorrecte ou clic sur Annuler",
  "ts||Invalid input !||fr": "Entrée invalide !",
  "ts||Buffer drawing tool on the selected layer||fr": "Outil de dessin de tampon sur le calque sélectionné",
  "ts||Polygon buffer drawing tool on the selected layer||fr": "Outil de dessin de tampon polygonal sur le calque sélectionné",
  "ts||Left click to place a text.||fr": "Clic gauche pour placer un texte.",
  "ts||Left click to place a point.||fr": "Clic gauche pour placer un point.",
  "ts||Left click to place points.||fr": "Clic gauche pour placer des points.",
  "ts||Right click to confirm.||fr": "Faites un clic droit pour confirmer.",
  "ts||Maintain the left click to draw a rectangle.||fr": "Maintenez le clic gauche pour dessiner un rectangle.",
  "ts||Maintain the left click to draw a circle.||fr": "Maintenez le clic gauche pour dessiner un cercle.",
  "ts||Simple left click to give a perimeter.||fr": "Un simple clic gauche pour donner un périmètre.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||fr": "Sélectionnez une couche vectorielle dans l'arborescence des couches, puis sélectionnez une entité sur la carte.",
  "ts||Length: {value} m||fr": "Longueur : {value} m",
  "ts||Area: {value} m²||fr": "Superficie : {value} m²",
  "ts||No object selected||fr": "Aucun objet sélectionné",
  "ts||No object was found under the click.||fr": "Aucun objet n'a été trouvé sous le clic.",
  "ts||Please click directly on an object of the active layer.||fr": "Veuillez cliquer directement sur un objet du calque actif.",
  "ts||Buffer creation||fr": "Création de tampon",
  "ts||Do you want to create a buffer around the selected object?||fr": "Voulez-vous créer un tampon autour de l'objet sélectionné ?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||fr": "Choisissez si la sélection doit utiliser l'objet lui-même ou un tampon autour de lui.",
  "ts||Create buffer||fr": "Créer un tampon",
  "ts||No buffer||fr": "Pas de tampon",
  "ts||Buffer size||fr": "Taille du tampon",
  "ts||Enter the buffer size in meters:||fr": "Entrez la taille du tampon en mètres :",
  "ts||(works only with a metric coordinate reference system)||fr": "(fonctionne uniquement avec un système de référence de coordonnées métriques)",
  "ts||Circle name||fr": "Nom du cercle",
  "ts||Enter a name for the circle:||fr": "Saisissez un nom pour le cercle :",
  "ts||Circle…||fr": "Cercle…",
  "ts||Rectangle name||fr": "Nom du rectangle",
  "ts||Enter a name for the rectangle:||fr": "Entrez un nom pour le rectangle :",
  "ts||Rectangle…||fr": "Rectangle…",
  "ts||Polygon name||fr": "Nom du polygone",
  "ts||Enter a name for the polygon:||fr": "Entrez un nom pour le polygone :",
  "ts||Buffer name||fr": "Nom du tampon",
  "ts||Enter a name for the buffer:||fr": "Entrez un nom pour le tampon :",
  "ts||Choosing a selection||fr": "Choisir une sélection",
  "ts||{name} drawn.||fr": "{name} dessiné.",
  "ts||Make a selection within its extent?||fr": "Faire une sélection dans son étendue ?",
  "ts||No group found||fr": "Aucun groupe trouvé",
  "ts||Aucun groupe n’existe dans le projet.||fr": "Aucun groupe n’existe dans le projet.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||fr": "Créez un groupe et choisissez les couches à y mettre :",
  "ts||New group name||fr": "Nouveau nom de groupe",
  "ts||Available layers||fr": "Calques disponibles",
  "ts||You must name the group.||fr": "Vous devez nommer le groupe.",
  "ts||Group created||fr": "Groupe créé",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||fr": "Le groupe {new_group_name} a été créé et les calques sélectionnés ont été déplacés.",
  "ts||Perimeter||fr": "Périmètre",
  "ts||Give a perimeter in m:||fr": "Donnez un périmètre en m :",
  "ts||(works only with metric crs)||fr": "(fonctionne uniquement avec les crs métriques)",
  "ts||End of selection||fr": "Fin de la sélection",
  "ts||The {sel_group} group has been unchecked.||fr": "Le groupe {sel_group} a été décoché.",
  "ts||Warning||fr": "Avertissement",
  "ts||You didn't click on a layer's attribute !||fr": "Vous n'avez pas cliqué sur l'attribut d'un calque !",
  "ts||You must give a non-null value for a point's or line's perimeter!||fr": "Vous devez donner une valeur non nulle pour le périmètre d'un point ou d'une ligne !",
  "ts||There is no selected layer, or it is not vector nor visible!||fr": "Il n'y a pas de calque sélectionné, ou il n'est ni vectoriel ni visible !",
  "ts||No groups||fr": "Aucun groupe",
  "ts||All groups are already checked.||fr": "Tous les groupes sont déjà vérifiés.",
  "ts||Choose a group for selection||fr": "Choisissez un groupe pour la sélection",
  "ts||Choose a group from the list:||fr": "Choisissez un groupe dans la liste :",
  "ts||WARNING!||fr": "AVERTISSEMENT!",
  "ts||Command not available:||fr": "Commande non disponible :",
  "ts||empty project.||fr": "projet vide.",
  "ts||Start again||fr": "Recommencer",
  "ts||No layer or group is selected.||fr": "Aucun calque ou groupe n'est sélectionné.",
  "ts||Start again.||fr": "Recommencer.",
  "ts||Selection not possible.||fr": "Sélection impossible.",
  "ts||The checked layer is not a polygon.||fr": "La couche cochée n'est pas un polygone.",
  "ts||No layer is selected in the Layer Manager.||fr": "Aucun calque n'est sélectionné dans le gestionnaire de calques.",
  "ts||QdrawEVT Help - Gestion_crise||fr": "QdrawEVT Help - Gestion_crise",
  "ts||No help file was found in the 'help' folder.||fr": "Aucun fichier d'aide n'a été trouvé dans le dossier 'help'.",
  "ts||Unable to read the help file: {error}||fr": "Impossible de lire le fichier d'aide : {error}",
  "ts||Close||fr": "Fermer",
  "ts||QdrawEVT - Settings||fr": "QdrawEVT - Paramètres",
  "ts||Change the drawing color||fr": "Changer la couleur du dessin",
  "ts||Change text font||fr": "Change text font",
  "ts||Change text color||fr": "Changer la couleur du texte",
  "ts||Create the group and the event layers||fr": "Créer le groupe et les couches d'événements",
  "ts||Enjeux||fr": "Enjeux",
  "ts||Aléas/risques||fr": "Aléas/risques",
  "ts||RDI||fr": "RDI",
  "ts||Administratif||fr": "Administratif",
  "ts||Fonds de plan||fr": "Fonds de plan",
  "ts||Creation of event shapefile||fr": "Création d'un fichier de formes d'événement",
  "ts||Possible only in a saved project.||fr": "Possible uniquement dans un projet enregistré.",
  "ts||Error when creating shapefile||fr": "Erreur lors de la création du fichier de formes",
  "ts||QdrawEVT||fr": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||fr": "Dessinez et sélectionnez facilement des entités dans l'empreinte du dessin",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||fr": "QdrawEVT vous permet de dessiner des points, des lignes et des polygones directement sur la carte et d'effectuer des sélections de couches qui se croisent.",
  "ts||A dedicated help is available from the plugin menu.||fr": "Une aide dédiée est disponible depuis le menu du plugin.",
  "ts||drawing, selection, events, vector, tools||fr": "dessin, sélection, événements, vecteur, outils",
  "ts||François Thévand||fr": "François Thévand",
  "ts||francois.thevand@gmail.com||fr": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||fr": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||fr": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Width:||en": "Width:",
  "ts||Height:||en": "Height:",
  "ts||Radius||en": "Radius",
  "ts||Latitude||en": "Latitude",
  "ts||Longitude||en": "Longitude",
  "ts||Degrees||en": "Degrees",
  "ts||Minutes||en": "Minutes",
  "ts||Seconds||en": "Seconds",
  "ts||Direction||en": "Direction",
  "ts||Settings||en": "Settings",
  "ts||Loading...||en": "Loading...",
  "ts||Session||en": "Session",
  "ts||Apply||en": "Apply",
  "ts||Cancel||en": "Cancel",
  "ts||Sheet||en": "Sheet",
  "ts||Error||en": "Error",
  "ts||Information||en": "Information",
  "ts||{path}||en": "{path}",
  "ts||{e_rep}||en": "{e_rep}",
  "ts||Open||en": "Open",
  "ts||{e_open}||en": "{e_open}",
  "ts||Drawing||en": "Drawing",
  "ts||Selecting...||en": "Selecting...",
  "ts||Pass||en": "Pass",
  "ts||Drawings||en": "Drawings",
  "ts||Install the Gestion_crise plugin||en": "Install the Crisis_management plugin",
  "ts||Saisie incorrecte ou clic sur Annuler||en": "Incorrect entry or click on Cancel",
  "ts||Aucun groupe n’existe dans le projet.||en": "No groups exist in the project.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||en": "Create a group and choose the layers to put in it:",
  "ts||Perimeter||en": "Perimeter",
  "ts||Warning||en": "Warning",
  "ts||QdrawEVT Help - Gestion_crise||en": "QdrawEVT Help - Crisis_management",
  "ts||Close||en": "Close",
  "ts||Enjeux||en": "Challenges",
  "ts||Aléas/risques||en": "Hazards/risks",
  "ts||RDI||en": "RDI",
  "ts||Administratif||en": "Administrative",
  "ts||Fonds de plan||en": "Plan funds",
  "ts||QdrawEVT||en": "QdrawEVT",
  "ts||francois.thevand@gmail.com||en": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||en": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||en": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||es": "Tamaño del rectángulo",
  "ts||Give a size in m:||es": "Dar una talla en m:",
  "ts||Width:||es": "Ancho:",
  "ts||Height:||es": "Altura:",
  "ts||Radius||es": "Radio",
  "ts||Give a radius in m:||es": "Dar un radio en m:",
  "ts||DMS Point Tool||es": "Herramienta de puntos DMS",
  "ts||Latitude||es": "Latitud",
  "ts||Longitude||es": "Longitud",
  "ts||Degrees||es": "Grados",
  "ts||Minutes||es": "Minutos",
  "ts||Seconds||es": "Artículos de segunda clase",
  "ts||Direction||es": "Dirección",
  "ts||XY Point drawing tool||es": "Herramienta de dibujo de punto XY",
  "ts||Selection made in %1 perimeter||es": "Selección realizada en el perímetro %1",
  "ts||Save this tab's results||es": "Guardar los resultados de esta pestaña",
  "ts||Save all results||es": "Guardar todos los resultados",
  "ts||Export the selection as a memory layer||es": "Exportar la selección como capa de memoria.",
  "ts||Export all tabs as a memory layer||es": "Exportar todas las pestañas como una capa de memoria",
  "ts||Zoom to selected attributes||es": "Zoom a atributos seleccionados",
  "ts||Highlight feature's geometry||es": "Resaltar la geometría de la entidad",
  "ts||Settings||es": "Ajustes",
  "ts||Loading...||es": "Cargando...",
  "ts||Rename window||es": "Cambiar nombre de ventana",
  "ts||Enter a new title:||es": "Introduzca un nuevo título:",
  "ts||Highlight feature's centroid||es": "Resaltar el centroide de la entidad",
  "ts||Extracts in {name}||es": "Extractos en {name}",
  "ts||Session||es": "Sesión",
  "ts||Extract {title}||es": "Extraer {title}",
  "ts||Tab {index}||es": "Pestaña {index}",
  "ts||Extract {}||es": "Extraer {}",
  "ts||Extracts in {}||es": "Extractos en {}",
  "ts||No items were selected||es": "No se seleccionó ningún artículo",
  "ts||Selected items: {nb} Area: {area} m²||es": "Artículos seleccionados: {nb} Área: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||es": "Artículos seleccionados: {nb} - Longitud: {lenght}m",
  "ts||Selected items: {nb}||es": "Artículos seleccionados: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||es": "[highlight_features] Error al actualizar la barra de estado: {e_sb}",
  "ts||Apply||es": "Aplicar",
  "ts||Cancel||es": "Cancelar",
  "ts||Sheet||es": "Hoja",
  "ts||Error||es": "Error",
  "ts||Cannot create export folder.||es": "No se puede crear la carpeta de exportación.",
  "ts||Selection made in||es": "Selección realizada en",
  "ts||Information||es": "Información",
  "ts||No active tab found.||es": "No se encontró ninguna pestaña activa.",
  "ts||No data to save.||es": "No hay datos para guardar.",
  "ts||Save in...||es": "Ahorra en...",
  "ts||OpenDocument Spreadsheet (*.ods)||es": "Hoja de cálculo OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||es": "No se puede reemplazar el archivo existente.",
  "ts||Please close it if it is open in another application, then try again.||es": "Ciérrelo si está abierto en otra aplicación y vuelva a intentarlo.",
  "ts||{path}||es": "{path}",
  "ts||Unable to write file:||es": "No se puede escribir el archivo:",
  "ts||{e_rep}||es": "{e_rep}",
  "ts||Open file?||es": "¿Abrir archivo?",
  "ts||ODS workbook created successfully:||es": "Libro de trabajo ODS creado exitosamente:",
  "ts||Open||es": "Abierto",
  "ts||Unable to open the ODS file automatically:||es": "No se puede abrir el archivo ODS automáticamente:",
  "ts||{e_open}||es": "{e_open}",
  "ts||Give a name to the item:||es": "Dale un nombre al artículo:",
  "ts||Name…||es": "Nombre…",
  "ts||Text…||es": "Texto…",
  "ts||Drawing||es": "Dibujo",
  "ts||Add text||es": "Agregar texto",
  "ts||Type the text to display:||es": "Escriba el texto a mostrar:",
  "ts||Add point||es": "Agregar punto",
  "ts||Give a name to the point:||es": "Ponle un nombre al punto:",
  "ts||Point…||es": "Punto…",
  "ts||Add line||es": "Agregar línea",
  "ts||Give a name to the line:||es": "Dale un nombre a la línea:",
  "ts||Line…||es": "Línea…",
  "ts||Add polygon||es": "Agregar polígono",
  "ts||Give a name to the polygon:||es": "Dale un nombre al polígono:",
  "ts||Polygon…||es": "Polígono…",
  "ts||Buffer selection||es": "Selección de búfer",
  "ts||Name this selection (buffer):||es": "Nombra esta selección (búfer):",
  "ts||Buffer…||es": "Buffer…",
  "ts||Add to an existing layer||es": "Agregar a una capa existente",
  "ts||Selecting...||es": "Seleccionando...",
  "ts||Pass||es": "Aprobar",
  "ts||Drawings||es": "Dibujos",
  "ts||DMS Point drawing tool||es": "Herramienta de dibujo de puntos DMS",
  "ts||Text drawing tool||es": "Herramienta de dibujo de texto",
  "ts||Point drawing tool||es": "Herramienta de dibujo de puntos",
  "ts||Line drawing tool||es": "Herramienta de dibujo lineal",
  "ts||Rectangle drawing tool||es": "Herramienta de dibujo rectangular",
  "ts||Circle drawing tool||es": "Herramienta de dibujo de círculos",
  "ts||Polygon drawing tool||es": "Herramienta de dibujo de polígonos",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||es": "Dibujo de zona de influencia con selección poligonal de objetos en la capa seleccionada",
  "ts||Buffer drawing on objects in selected layer||es": "Dibujo de zona de influencia en objetos en la capa seleccionada",
  "ts||Install the Gestion_crise plugin||es": "Instale el complemento Crisis_management",
  "ts||Help / User manual||es": "Ayuda / Manual de usuario",
  "ts||No selection||es": "Sin selección",
  "ts||No selected items found in visible vector layers.||es": "No se encontraron elementos seleccionados en capas vectoriales visibles.",
  "ts||XY point drawing tool||es": "Herramienta de dibujo de puntos XY",
  "ts||DMS point drawing tool||es": "Herramienta de dibujo de puntos DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||es": "Entrada incorrecta o haga clic en Cancelar",
  "ts||Invalid input !||es": "Entrada no válida!",
  "ts||Buffer drawing tool on the selected layer||es": "Herramienta de dibujo de zona de influencia en la capa seleccionada",
  "ts||Polygon buffer drawing tool on the selected layer||es": "Herramienta de dibujo de zona de influencia poligonal en la capa seleccionada",
  "ts||Left click to place a text.||es": "Haga clic izquierdo para colocar un texto.",
  "ts||Left click to place a point.||es": "Haga clic izquierdo para colocar un punto.",
  "ts||Left click to place points.||es": "Haga clic izquierdo para colocar puntos.",
  "ts||Right click to confirm.||es": "Haga clic derecho para confirmar.",
  "ts||Maintain the left click to draw a rectangle.||es": "Mantenga el clic izquierdo para dibujar un rectángulo.",
  "ts||Maintain the left click to draw a circle.||es": "Mantenga el clic izquierdo para dibujar un círculo.",
  "ts||Simple left click to give a perimeter.||es": "Simple clic izquierdo para dar un perímetro.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||es": "Seleccione una capa vectorial en el árbol de capas y luego seleccione una entidad en el mapa.",
  "ts||Length: {value} m||es": "Longitud: {value} m",
  "ts||Area: {value} m²||es": "Área: {value} m²",
  "ts||No object selected||es": "Ningún objeto seleccionado",
  "ts||No object was found under the click.||es": "No se encontró ningún objeto debajo del clic.",
  "ts||Please click directly on an object of the active layer.||es": "Haga clic directamente en un objeto de la capa activa.",
  "ts||Buffer creation||es": "Creación de búfer",
  "ts||Do you want to create a buffer around the selected object?||es": "¿Quieres crear un búfer alrededor del objeto seleccionado?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||es": "Elija si la selección debe utilizar el objeto en sí o un búfer a su alrededor.",
  "ts||Create buffer||es": "Crear buffer",
  "ts||No buffer||es": "Sin búfer",
  "ts||Buffer size||es": "Tamaño del búfer",
  "ts||Enter the buffer size in meters:||es": "Introduzca el tamaño del buffer en metros:",
  "ts||(works only with a metric coordinate reference system)||es": "(funciona sólo con un sistema de referencia de coordenadas métricas)",
  "ts||Circle name||es": "Nombre del círculo",
  "ts||Enter a name for the circle:||es": "Ingrese un nombre para el círculo:",
  "ts||Circle…||es": "Círculo…",
  "ts||Rectangle name||es": "Nombre del rectángulo",
  "ts||Enter a name for the rectangle:||es": "Introduzca un nombre para el rectángulo:",
  "ts||Rectangle…||es": "Rectángulo…",
  "ts||Polygon name||es": "Nombre del polígono",
  "ts||Enter a name for the polygon:||es": "Introduzca un nombre para el polígono:",
  "ts||Buffer name||es": "Nombre del búfer",
  "ts||Enter a name for the buffer:||es": "Introduzca un nombre para el búfer:",
  "ts||Choosing a selection||es": "Elegir una selección",
  "ts||{name} drawn.||es": "{name} dibujado.",
  "ts||Make a selection within its extent?||es": "¿Hacer una selección dentro de su alcance?",
  "ts||No group found||es": "No se encontró ningún grupo",
  "ts||Aucun groupe n’existe dans le projet.||es": "No existen grupos en el proyecto.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||es": "Crea un grupo y elige las capas para poner en él:",
  "ts||New group name||es": "Nuevo nombre de grupo",
  "ts||Available layers||es": "Capas disponibles",
  "ts||You must name the group.||es": "Debes nombrar el grupo.",
  "ts||Group created||es": "Grupo creado",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||es": "Se ha creado el grupo {new_group_name} y se han movido las capas seleccionadas.",
  "ts||Perimeter||es": "Perímetro",
  "ts||Give a perimeter in m:||es": "Calcula el perímetro en m:",
  "ts||(works only with metric crs)||es": "(funciona sólo con crs métricos)",
  "ts||End of selection||es": "Fin de la selección",
  "ts||The {sel_group} group has been unchecked.||es": "El grupo {sel_group} no está marcado.",
  "ts||Warning||es": "Advertencia",
  "ts||You didn't click on a layer's attribute !||es": "¡No hiciste clic en el atributo de una capa!",
  "ts||You must give a non-null value for a point's or line's perimeter!||es": "¡Debes dar un valor no nulo para el perímetro de un punto o línea!",
  "ts||There is no selected layer, or it is not vector nor visible!||es": "¡No hay ninguna capa seleccionada o no es vectorial ni visible!",
  "ts||No groups||es": "Sin grupos",
  "ts||All groups are already checked.||es": "Todos los grupos ya están marcados.",
  "ts||Choose a group for selection||es": "Elija un grupo para la selección",
  "ts||Choose a group from the list:||es": "Elija un grupo de la lista:",
  "ts||WARNING!||es": "¡ADVERTENCIA!",
  "ts||Command not available:||es": "Comando no disponible:",
  "ts||empty project.||es": "proyecto vacío.",
  "ts||Start again||es": "Empezar de nuevo",
  "ts||No layer or group is selected.||es": "No se selecciona ninguna capa o grupo.",
  "ts||Start again.||es": "Empezar de nuevo.",
  "ts||Selection not possible.||es": "La selección no es posible.",
  "ts||The checked layer is not a polygon.||es": "La capa marcada no es un polígono.",
  "ts||No layer is selected in the Layer Manager.||es": "No hay ninguna capa seleccionada en el Administrador de capas.",
  "ts||QdrawEVT Help - Gestion_crise||es": "Ayuda de QdrawEVT - Crisis_management",
  "ts||No help file was found in the 'help' folder.||es": "No se encontró ningún archivo de ayuda en la carpeta 'ayuda'.",
  "ts||Unable to read the help file: {error}||es": "No se puede leer el archivo de ayuda: {error}",
  "ts||Close||es": "Cerca",
  "ts||QdrawEVT - Settings||es": "QdrawEVT - Configuración",
  "ts||Change the drawing color||es": "Cambiar el color del dibujo",
  "ts||Change text font||es": "Cambiar fuente de texto",
  "ts||Change text color||es": "Cambiar color de texto",
  "ts||Create the group and the event layers||es": "Crear el grupo y las capas de eventos.",
  "ts||Enjeux||es": "Desafíos",
  "ts||Aléas/risques||es": "Peligros/riesgos",
  "ts||RDI||es": "I+D+I",
  "ts||Administratif||es": "Administrativo",
  "ts||Fonds de plan||es": "Fondos del plan",
  "ts||Creation of event shapefile||es": "Creación de un archivo de forma de evento.",
  "ts||Possible only in a saved project.||es": "Sólo es posible en un proyecto guardado.",
  "ts||Error when creating shapefile||es": "Error al crear un archivo de forma",
  "ts||QdrawEVT||es": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||es": "Dibuje y seleccione entidades fácilmente dentro del espacio del dibujo",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||es": "QdrawEVT le permite dibujar puntos, líneas y polígonos directamente en el mapa y realizar selecciones de capas que se cruzan.",
  "ts||A dedicated help is available from the plugin menu.||es": "Una ayuda dedicada está disponible en el menú del complemento.",
  "ts||drawing, selection, events, vector, tools||es": "dibujo, selección, eventos, vector, herramientas",
  "ts||François Thévand||es": "François Thévand",
  "ts||francois.thevand@gmail.com||es": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||es": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||es": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||pt": "Tamanho do retângulo",
  "ts||Give a size in m:||pt": "Dê um tamanho em m:",
  "ts||Width:||pt": "Largura:",
  "ts||Height:||pt": "Altura:",
  "ts||Radius||pt": "Raio",
  "ts||Give a radius in m:||pt": "Dê um raio em m:",
  "ts||DMS Point Tool||pt": "Ferramenta Ponto DMS",
  "ts||Latitude||pt": "Latitude",
  "ts||Longitude||pt": "Longitude",
  "ts||Degrees||pt": "Graus",
  "ts||Minutes||pt": "Minutos",
  "ts||Seconds||pt": "Segundos",
  "ts||Direction||pt": "Direção",
  "ts||XY Point drawing tool||pt": "Ferramenta de desenho de ponto XY",
  "ts||Selection made in %1 perimeter||pt": "Seleção feita no perímetro %1",
  "ts||Save this tab's results||pt": "Salve os resultados desta guia",
  "ts||Save all results||pt": "Salvar todos os resultados",
  "ts||Export the selection as a memory layer||pt": "Exporte a seleção como uma camada de memória",
  "ts||Export all tabs as a memory layer||pt": "Exporte todas as guias como uma camada de memória",
  "ts||Zoom to selected attributes||pt": "Zoom nos atributos selecionados",
  "ts||Highlight feature's geometry||pt": "Destacar a geometria do recurso",
  "ts||Settings||pt": "Configurações",
  "ts||Loading...||pt": "Carregando...",
  "ts||Rename window||pt": "Renomear janela",
  "ts||Enter a new title:||pt": "Insira um novo título:",
  "ts||Highlight feature's centroid||pt": "Destacar o centróide do recurso",
  "ts||Extracts in {name}||pt": "Extrações em {name}",
  "ts||Session||pt": "Sessão",
  "ts||Extract {title}||pt": "Extrair {title}",
  "ts||Tab {index}||pt": "Guia {index}",
  "ts||Extract {}||pt": "Extrair {}",
  "ts||Extracts in {}||pt": "Extrações em {}",
  "ts||No items were selected||pt": "Nenhum item foi selecionado",
  "ts||Selected items: {nb} Area: {area} m²||pt": "Itens selecionados: {nb} Área: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||pt": "Itens selecionados: {nb} - Comprimento: {lenght}m",
  "ts||Selected items: {nb}||pt": "Itens selecionados: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||pt": "[highlight_features] Falha na atualização da barra de status: {e_sb}",
  "ts||Apply||pt": "Aplicar",
  "ts||Cancel||pt": "Cancelar",
  "ts||Sheet||pt": "Folha",
  "ts||Error||pt": "Erro",
  "ts||Cannot create export folder.||pt": "Não é possível criar a pasta de exportação.",
  "ts||Selection made in||pt": "Seleção feita em",
  "ts||Information||pt": "Informação",
  "ts||No active tab found.||pt": "Nenhuma guia ativa encontrada.",
  "ts||No data to save.||pt": "Não há dados para salvar.",
  "ts||Save in...||pt": "Salvar em...",
  "ts||OpenDocument Spreadsheet (*.ods)||pt": "Planilha OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||pt": "Não é possível substituir o arquivo existente.",
  "ts||Please close it if it is open in another application, then try again.||pt": "Feche-o se estiver aberto em outro aplicativo e tente novamente.",
  "ts||{path}||pt": "{path}",
  "ts||Unable to write file:||pt": "Não foi possível gravar o arquivo:",
  "ts||{e_rep}||pt": "{e_rep}",
  "ts||Open file?||pt": "Abrir arquivo?",
  "ts||ODS workbook created successfully:||pt": "Pasta de trabalho ODS criada com sucesso:",
  "ts||Open||pt": "Abrir",
  "ts||Unable to open the ODS file automatically:||pt": "Não é possível abrir o arquivo ODS automaticamente:",
  "ts||{e_open}||pt": "{e_open}",
  "ts||Give a name to the item:||pt": "Dê um nome ao item:",
  "ts||Name…||pt": "Nome…",
  "ts||Text…||pt": "Texto…",
  "ts||Drawing||pt": "Desenho",
  "ts||Add text||pt": "Adicionar texto",
  "ts||Type the text to display:||pt": "Digite o texto a ser exibido:",
  "ts||Add point||pt": "Adicionar ponto",
  "ts||Give a name to the point:||pt": "Dê um nome ao ponto:",
  "ts||Point…||pt": "Apontar…",
  "ts||Add line||pt": "Adicionar linha",
  "ts||Give a name to the line:||pt": "Dê um nome à linha:",
  "ts||Line…||pt": "Linha…",
  "ts||Add polygon||pt": "Adicionar polígono",
  "ts||Give a name to the polygon:||pt": "Dê um nome ao polígono:",
  "ts||Polygon…||pt": "Polígono…",
  "ts||Buffer selection||pt": "Seleção de buffer",
  "ts||Name this selection (buffer):||pt": "Nomeie esta seleção (buffer):",
  "ts||Buffer…||pt": "Buffer…",
  "ts||Add to an existing layer||pt": "Adicionar a uma camada existente",
  "ts||Selecting...||pt": "Selecionando...",
  "ts||Pass||pt": "Passar",
  "ts||Drawings||pt": "Desenhos",
  "ts||DMS Point drawing tool||pt": "Ferramenta de desenho DMS Point",
  "ts||Text drawing tool||pt": "Ferramenta de desenho de texto",
  "ts||Point drawing tool||pt": "Ferramenta de desenho de ponto",
  "ts||Line drawing tool||pt": "Ferramenta de desenho de linha",
  "ts||Rectangle drawing tool||pt": "Ferramenta de desenho retangular",
  "ts||Circle drawing tool||pt": "Ferramenta de desenho de círculo",
  "ts||Polygon drawing tool||pt": "Ferramenta de desenho de polígono",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||pt": "Desenho buffer com seleção poligonal de objetos na camada selecionada",
  "ts||Buffer drawing on objects in selected layer||pt": "Buffer de desenho em objetos na camada selecionada",
  "ts||Install the Gestion_crise plugin||pt": "Instale o plugin Crisis_management",
  "ts||Help / User manual||pt": "Ajuda / Manual do usuário",
  "ts||No selection||pt": "Nenhuma seleção",
  "ts||No selected items found in visible vector layers.||pt": "Nenhum item selecionado foi encontrado nas camadas vetoriais visíveis.",
  "ts||XY point drawing tool||pt": "Ferramenta de desenho de ponto XY",
  "ts||DMS point drawing tool||pt": "Ferramenta de desenho de ponto DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||pt": "Entrada incorreta ou clique em Cancelar",
  "ts||Invalid input !||pt": "Entrada inválida!",
  "ts||Buffer drawing tool on the selected layer||pt": "Ferramenta de desenho de buffer na camada selecionada",
  "ts||Polygon buffer drawing tool on the selected layer||pt": "Ferramenta de desenho de buffer de polígono na camada selecionada",
  "ts||Left click to place a text.||pt": "Clique com o botão esquerdo para colocar um texto.",
  "ts||Left click to place a point.||pt": "Clique com o botão esquerdo para colocar um ponto.",
  "ts||Left click to place points.||pt": "Clique com o botão esquerdo para colocar pontos.",
  "ts||Right click to confirm.||pt": "Clique com o botão direito para confirmar.",
  "ts||Maintain the left click to draw a rectangle.||pt": "Mantenha o clique esquerdo para desenhar um retângulo.",
  "ts||Maintain the left click to draw a circle.||pt": "Mantenha o clique esquerdo para desenhar um círculo.",
  "ts||Simple left click to give a perimeter.||pt": "Simples clique com o botão esquerdo para dar um perímetro.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||pt": "Selecione uma camada vetorial na Árvore de camadas e selecione uma entidade no mapa.",
  "ts||Length: {value} m||pt": "Comprimento: {value} m",
  "ts||Area: {value} m²||pt": "Área: {value} m²",
  "ts||No object selected||pt": "Nenhum objeto selecionado",
  "ts||No object was found under the click.||pt": "Nenhum objeto foi encontrado sob o clique.",
  "ts||Please click directly on an object of the active layer.||pt": "Clique diretamente em um objeto da camada ativa.",
  "ts||Buffer creation||pt": "Criação de buffer",
  "ts||Do you want to create a buffer around the selected object?||pt": "Você deseja criar um buffer ao redor do objeto selecionado?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||pt": "Escolha se a seleção deve usar o próprio objeto ou um buffer ao seu redor.",
  "ts||Create buffer||pt": "Criar buffer",
  "ts||No buffer||pt": "Sem buffer",
  "ts||Buffer size||pt": "Tamanho do buffer",
  "ts||Enter the buffer size in meters:||pt": "Insira o tamanho do buffer em metros:",
  "ts||(works only with a metric coordinate reference system)||pt": "(funciona apenas com um sistema de referência de coordenadas métricas)",
  "ts||Circle name||pt": "Nome do círculo",
  "ts||Enter a name for the circle:||pt": "Digite um nome para o círculo:",
  "ts||Circle…||pt": "Círculo…",
  "ts||Rectangle name||pt": "Nome do retângulo",
  "ts||Enter a name for the rectangle:||pt": "Digite um nome para o retângulo:",
  "ts||Rectangle…||pt": "Retângulo…",
  "ts||Polygon name||pt": "Nome do polígono",
  "ts||Enter a name for the polygon:||pt": "Digite um nome para o polígono:",
  "ts||Buffer name||pt": "Nome do buffer",
  "ts||Enter a name for the buffer:||pt": "Insira um nome para o buffer:",
  "ts||Choosing a selection||pt": "Escolhendo uma seleção",
  "ts||{name} drawn.||pt": "{name} desenhado.",
  "ts||Make a selection within its extent?||pt": "Fazer uma seleção dentro de sua extensão?",
  "ts||No group found||pt": "Nenhum grupo encontrado",
  "ts||Aucun groupe n’existe dans le projet.||pt": "Não existem grupos no projeto.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||pt": "Crie um grupo e escolha as camadas que deseja colocar nele:",
  "ts||New group name||pt": "Novo nome do grupo",
  "ts||Available layers||pt": "Camadas disponíveis",
  "ts||You must name the group.||pt": "Você deve nomear o grupo.",
  "ts||Group created||pt": "Grupo criado",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||pt": "O grupo {new_group_name} foi criado e as camadas selecionadas foram movidas.",
  "ts||Perimeter||pt": "Perímetro",
  "ts||Give a perimeter in m:||pt": "Dê um perímetro em m:",
  "ts||(works only with metric crs)||pt": "(funciona apenas com crs métricos)",
  "ts||End of selection||pt": "Fim da seleção",
  "ts||The {sel_group} group has been unchecked.||pt": "O grupo {sel_group} foi desmarcado.",
  "ts||Warning||pt": "Aviso",
  "ts||You didn't click on a layer's attribute !||pt": "Você não clicou no atributo de uma camada!",
  "ts||You must give a non-null value for a point's or line's perimeter!||pt": "Você deve fornecer um valor não nulo para o perímetro de um ponto ou linha!",
  "ts||There is no selected layer, or it is not vector nor visible!||pt": "Não há camada selecionada ou não é vetorial nem visível!",
  "ts||No groups||pt": "Nenhum grupo",
  "ts||All groups are already checked.||pt": "Todos os grupos já estão verificados.",
  "ts||Choose a group for selection||pt": "Escolha um grupo para seleção",
  "ts||Choose a group from the list:||pt": "Escolha um grupo da lista:",
  "ts||WARNING!||pt": "AVISO!",
  "ts||Command not available:||pt": "Comando não disponível:",
  "ts||empty project.||pt": "projeto vazio.",
  "ts||Start again||pt": "Começar de novo",
  "ts||No layer or group is selected.||pt": "Nenhuma camada ou grupo está selecionado.",
  "ts||Start again.||pt": "Comece de novo.",
  "ts||Selection not possible.||pt": "Seleção não é possível.",
  "ts||The checked layer is not a polygon.||pt": "A camada verificada não é um polígono.",
  "ts||No layer is selected in the Layer Manager.||pt": "Nenhuma camada está selecionada no Gerenciador de camadas.",
  "ts||QdrawEVT Help - Gestion_crise||pt": "Ajuda QdrawEVT - Crisis_management",
  "ts||No help file was found in the 'help' folder.||pt": "Nenhum arquivo de ajuda foi encontrado na pasta 'help'.",
  "ts||Unable to read the help file: {error}||pt": "Não foi possível ler o arquivo de ajuda: {error}",
  "ts||Close||pt": "Fechar",
  "ts||QdrawEVT - Settings||pt": "QdrawEVT - Configurações",
  "ts||Change the drawing color||pt": "Alterar a cor do desenho",
  "ts||Change text font||pt": "Alterar fonte do texto",
  "ts||Change text color||pt": "Alterar a cor do texto",
  "ts||Create the group and the event layers||pt": "Crie o grupo e as camadas de eventos",
  "ts||Enjeux||pt": "Desafios",
  "ts||Aléas/risques||pt": "Perigos/riscos",
  "ts||RDI||pt": "IDI",
  "ts||Administratif||pt": "Administrativo",
  "ts||Fonds de plan||pt": "Planejar fundos",
  "ts||Creation of event shapefile||pt": "Criação de shapefile de evento",
  "ts||Possible only in a saved project.||pt": "Possível apenas em um projeto salvo.",
  "ts||Error when creating shapefile||pt": "Erro ao criar shapefile",
  "ts||QdrawEVT||pt": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||pt": "Desenhe e selecione facilmente entidades dentro da área de desenho",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||pt": "QdrawEVT permite desenhar pontos, linhas e polígonos diretamente no mapa e realizar seleções de camadas que se cruzam.",
  "ts||A dedicated help is available from the plugin menu.||pt": "Uma ajuda dedicada está disponível no menu do plugin.",
  "ts||drawing, selection, events, vector, tools||pt": "desenho, seleção, eventos, vetor, ferramentas",
  "ts||François Thévand||pt": "François Thévand",
  "ts||francois.thevand@gmail.com||pt": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||pt": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||pt": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||it": "Dimensione rettangolo",
  "ts||Give a size in m:||it": "Indica una taglia in m:",
  "ts||Width:||it": "Larghezza:",
  "ts||Height:||it": "Altezza:",
  "ts||Radius||it": "Raggio",
  "ts||Give a radius in m:||it": "Fornisci un raggio in m:",
  "ts||DMS Point Tool||it": "Strumento punto DMS",
  "ts||Latitude||it": "Latitudine",
  "ts||Longitude||it": "Longitudine",
  "ts||Degrees||it": "Gradi",
  "ts||Minutes||it": "Minuti",
  "ts||Seconds||it": "Secondi",
  "ts||Direction||it": "Direzione",
  "ts||XY Point drawing tool||it": "Strumento di disegno punti XY",
  "ts||Selection made in %1 perimeter||it": "Selezione effettuata nel perimetro %1",
  "ts||Save this tab's results||it": "Salva i risultati di questa scheda",
  "ts||Save all results||it": "Salva tutti i risultati",
  "ts||Export the selection as a memory layer||it": "Esporta la selezione come livello di memoria",
  "ts||Export all tabs as a memory layer||it": "Esporta tutte le schede come livello di memoria",
  "ts||Zoom to selected attributes||it": "Zoom sugli attributi selezionati",
  "ts||Highlight feature's geometry||it": "Evidenzia la geometria dell'elemento",
  "ts||Settings||it": "Impostazioni",
  "ts||Loading...||it": "Caricamento...",
  "ts||Rename window||it": "Rinomina finestra",
  "ts||Enter a new title:||it": "Inserisci un nuovo titolo:",
  "ts||Highlight feature's centroid||it": "Evidenzia il baricentro dell'elemento",
  "ts||Extracts in {name}||it": "Estratti in {name}",
  "ts||Session||it": "Sessione",
  "ts||Extract {title}||it": "Estrai {title}",
  "ts||Tab {index}||it": "Linguetta {index}",
  "ts||Extract {}||it": "Estrai {}",
  "ts||Extracts in {}||it": "Estratti in {}",
  "ts||No items were selected||it": "Nessun elemento è stato selezionato",
  "ts||Selected items: {nb} Area: {area} m²||it": "Elementi selezionati: {nb} Area: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||it": "Articoli selezionati: {nb} - Lunghezza: {lenght}m",
  "ts||Selected items: {nb}||it": "Articoli selezionati: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||it": "[highlight_features] Aggiornamento della barra di stato non riuscito: {e_sb}",
  "ts||Apply||it": "Fare domanda a",
  "ts||Cancel||it": "Cancellare",
  "ts||Sheet||it": "Foglio",
  "ts||Error||it": "Errore",
  "ts||Cannot create export folder.||it": "Impossibile creare la cartella di esportazione.",
  "ts||Selection made in||it": "Selezione effettuata in",
  "ts||Information||it": "Informazioni",
  "ts||No active tab found.||it": "Nessuna scheda attiva trovata.",
  "ts||No data to save.||it": "Nessun dato da salvare.",
  "ts||Save in...||it": "Risparmia in...",
  "ts||OpenDocument Spreadsheet (*.ods)||it": "Foglio di calcolo OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||it": "Impossibile sostituire il file esistente.",
  "ts||Please close it if it is open in another application, then try again.||it": "Se è aperto in un'altra applicazione, chiudilo e riprova.",
  "ts||{path}||it": "__PH_BRACCIALI_0__ {path}",
  "ts||Unable to write file:||it": "Impossibile scrivere il file:",
  "ts||{e_rep}||it": "__PH_BRACCIALI_0__ {e_rep}",
  "ts||Open file?||it": "Apri file?",
  "ts||ODS workbook created successfully:||it": "Cartella di lavoro ODS creata correttamente:",
  "ts||Open||it": "Aprire",
  "ts||Unable to open the ODS file automatically:||it": "Impossibile aprire automaticamente il file ODS:",
  "ts||{e_open}||it": "__PH_BRACCIALI_0__ {e_open}",
  "ts||Give a name to the item:||it": "Dai un nome all'oggetto:",
  "ts||Name…||it": "Nome…",
  "ts||Text…||it": "Testo…",
  "ts||Drawing||it": "Disegno",
  "ts||Add text||it": "Aggiungi testo",
  "ts||Type the text to display:||it": "Digitare il testo da visualizzare:",
  "ts||Add point||it": "Aggiungi punto",
  "ts||Give a name to the point:||it": "Dai un nome al punto:",
  "ts||Point…||it": "Punto…",
  "ts||Add line||it": "Aggiungi riga",
  "ts||Give a name to the line:||it": "Dai un nome alla linea:",
  "ts||Line…||it": "Linea…",
  "ts||Add polygon||it": "Aggiungi poligono",
  "ts||Give a name to the polygon:||it": "Dai un nome al poligono:",
  "ts||Polygon…||it": "Poligono…",
  "ts||Buffer selection||it": "Selezione del buffer",
  "ts||Name this selection (buffer):||it": "Assegna un nome a questa selezione (buffer):",
  "ts||Buffer…||it": "Respingente…",
  "ts||Add to an existing layer||it": "Aggiungi a un livello esistente",
  "ts||Selecting...||it": "Selezionando...",
  "ts||Pass||it": "Passaggio",
  "ts||Drawings||it": "Disegni",
  "ts||DMS Point drawing tool||it": "Strumento di disegno dei punti DMS",
  "ts||Text drawing tool||it": "Strumento per disegnare testi",
  "ts||Point drawing tool||it": "Strumento di disegno dei punti",
  "ts||Line drawing tool||it": "Strumento di disegno di linee",
  "ts||Rectangle drawing tool||it": "Strumento per disegnare rettangoli",
  "ts||Circle drawing tool||it": "Strumento per disegnare cerchi",
  "ts||Polygon drawing tool||it": "Strumento per disegnare poligoni",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||it": "Disegno buffer con selezione poligonale di oggetti nel livello selezionato",
  "ts||Buffer drawing on objects in selected layer||it": "Buffer di disegno sugli oggetti nel livello selezionato",
  "ts||Install the Gestion_crise plugin||it": "Installa il plugin Crisis_management",
  "ts||Help / User manual||it": "Aiuto/Manuale utente",
  "ts||No selection||it": "Nessuna selezione",
  "ts||No selected items found in visible vector layers.||it": "Nessun elemento selezionato trovato nei livelli vettoriali visibili.",
  "ts||XY point drawing tool||it": "Strumento di disegno di punti XY",
  "ts||DMS point drawing tool||it": "Strumento di disegno dei punti DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||it": "Inserimento errato oppure fare clic su Annulla",
  "ts||Invalid input !||it": "Inserimento non valido!",
  "ts||Buffer drawing tool on the selected layer||it": "Strumento di disegno buffer sul livello selezionato",
  "ts||Polygon buffer drawing tool on the selected layer||it": "Strumento di disegno del buffer poligonale sul livello selezionato",
  "ts||Left click to place a text.||it": "Fare clic con il tasto sinistro per inserire un testo.",
  "ts||Left click to place a point.||it": "Fare clic con il tasto sinistro per posizionare un punto.",
  "ts||Left click to place points.||it": "Fare clic con il tasto sinistro per posizionare i punti.",
  "ts||Right click to confirm.||it": "Fare clic con il tasto destro per confermare.",
  "ts||Maintain the left click to draw a rectangle.||it": "Mantieni il clic sinistro per disegnare un rettangolo.",
  "ts||Maintain the left click to draw a circle.||it": "Mantieni il clic sinistro per disegnare un cerchio.",
  "ts||Simple left click to give a perimeter.||it": "Semplice clic sinistro per dare un perimetro.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||it": "Seleziona un layer vettoriale nell'albero dei layer, quindi seleziona un'entità sulla mappa.",
  "ts||Length: {value} m||it": "Lunghezza: {value} m",
  "ts||Area: {value} m²||it": "Superficie: {value} m²",
  "ts||No object selected||it": "Nessun oggetto selezionato",
  "ts||No object was found under the click.||it": "Nessun oggetto è stato trovato sotto il clic.",
  "ts||Please click directly on an object of the active layer.||it": "Fare clic direttamente su un oggetto del livello attivo.",
  "ts||Buffer creation||it": "Creazione del buffer",
  "ts||Do you want to create a buffer around the selected object?||it": "Vuoi creare un buffer attorno all'oggetto selezionato?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||it": "Scegli se la selezione deve utilizzare l'oggetto stesso o un buffer attorno ad esso.",
  "ts||Create buffer||it": "Crea buffer",
  "ts||No buffer||it": "Nessun buffer",
  "ts||Buffer size||it": "Dimensione del buffer",
  "ts||Enter the buffer size in meters:||it": "Inserisci la dimensione del buffer in metri:",
  "ts||(works only with a metric coordinate reference system)||it": "(funziona solo con un sistema di riferimento di coordinate metriche)",
  "ts||Circle name||it": "Nome del cerchio",
  "ts||Enter a name for the circle:||it": "Inserisci un nome per la cerchia:",
  "ts||Circle…||it": "Cerchio…",
  "ts||Rectangle name||it": "Nome del rettangolo",
  "ts||Enter a name for the rectangle:||it": "Inserisci un nome per il rettangolo:",
  "ts||Rectangle…||it": "Rettangolo…",
  "ts||Polygon name||it": "Nome del poligono",
  "ts||Enter a name for the polygon:||it": "Inserisci un nome per il poligono:",
  "ts||Buffer name||it": "Nome del buffer",
  "ts||Enter a name for the buffer:||it": "Inserisci un nome per il buffer:",
  "ts||Choosing a selection||it": "Scegliere una selezione",
  "ts||{name} drawn.||it": "{name} disegnato.",
  "ts||Make a selection within its extent?||it": "Effettuare una selezione entro la sua portata?",
  "ts||No group found||it": "Nessun gruppo trovato",
  "ts||Aucun groupe n’existe dans le projet.||it": "Non esistono gruppi nel progetto.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||it": "Crea un gruppo e scegli i livelli da inserire al suo interno:",
  "ts||New group name||it": "Nuovo nome del gruppo",
  "ts||Available layers||it": "Livelli disponibili",
  "ts||You must name the group.||it": "Devi dare un nome al gruppo.",
  "ts||Group created||it": "Gruppo creato",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||it": "Il gruppo {new_group_name} è stato creato e i livelli selezionati sono stati spostati.",
  "ts||Perimeter||it": "Perimetro",
  "ts||Give a perimeter in m:||it": "Dai un perimetro in m:",
  "ts||(works only with metric crs)||it": "(funziona solo con CR metrici)",
  "ts||End of selection||it": "Fine della selezione",
  "ts||The {sel_group} group has been unchecked.||it": "Il gruppo {sel_group} è stato deselezionato.",
  "ts||Warning||it": "Avvertimento",
  "ts||You didn't click on a layer's attribute !||it": "Non hai fatto clic sull'attributo di un livello!",
  "ts||You must give a non-null value for a point's or line's perimeter!||it": "Devi dare un valore non nullo per il perimetro di un punto o di una linea!",
  "ts||There is no selected layer, or it is not vector nor visible!||it": "Non c'è nessun livello selezionato, oppure non è vettoriale né visibile!",
  "ts||No groups||it": "Nessun gruppo",
  "ts||All groups are already checked.||it": "Tutti i gruppi sono già selezionati.",
  "ts||Choose a group for selection||it": "Scegli un gruppo per la selezione",
  "ts||Choose a group from the list:||it": "Scegli un gruppo dall'elenco:",
  "ts||WARNING!||it": "AVVERTIMENTO!",
  "ts||Command not available:||it": "Comando non disponibile:",
  "ts||empty project.||it": "progetto vuoto.",
  "ts||Start again||it": "Ricominciare",
  "ts||No layer or group is selected.||it": "Nessun livello o gruppo è selezionato.",
  "ts||Start again.||it": "Ricominciare.",
  "ts||Selection not possible.||it": "Selezione non possibile.",
  "ts||The checked layer is not a polygon.||it": "Il livello selezionato non è un poligono.",
  "ts||No layer is selected in the Layer Manager.||it": "Nessun livello è selezionato nel Gestore livelli.",
  "ts||QdrawEVT Help - Gestion_crise||it": "Aiuto QdrawEVT - Gestione_crisi",
  "ts||No help file was found in the 'help' folder.||it": "Nessun file della guida trovato nella cartella 'aiuto'.",
  "ts||Unable to read the help file: {error}||it": "Impossibile leggere il file della guida: {error}",
  "ts||Close||it": "Vicino",
  "ts||QdrawEVT - Settings||it": "QdrawEVT - Impostazioni",
  "ts||Change the drawing color||it": "Cambia il colore del disegno",
  "ts||Change text font||it": "Cambia carattere del testo",
  "ts||Change text color||it": "Cambia il colore del testo",
  "ts||Create the group and the event layers||it": "Crea il gruppo e i livelli degli eventi",
  "ts||Enjeux||it": "Sfide",
  "ts||Aléas/risques||it": "Pericoli/rischi",
  "ts||RDI||it": "RDI",
  "ts||Administratif||it": "Amministrativo",
  "ts||Fonds de plan||it": "Pianificare i fondi",
  "ts||Creation of event shapefile||it": "Creazione dello shapefile dell'evento",
  "ts||Possible only in a saved project.||it": "Possibile solo in un progetto salvato.",
  "ts||Error when creating shapefile||it": "Errore durante la creazione del file di forma",
  "ts||QdrawEVT||it": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||it": "Disegna e seleziona facilmente le entità all'interno dell'impronta del disegno",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||it": "QdrawEVT consente di disegnare punti, linee e poligoni direttamente sulla mappa ed eseguire selezioni di layer che si intersecano.",
  "ts||A dedicated help is available from the plugin menu.||it": "Una guida dedicata è disponibile dal menu del plugin.",
  "ts||drawing, selection, events, vector, tools||it": "disegno, selezione, eventi, vettore, strumenti",
  "ts||François Thévand||it": "François Thévand",
  "ts||francois.thevand@gmail.com||it": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||it": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||it": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||de": "Rechteckgröße",
  "ts||Give a size in m:||de": "Geben Sie eine Größe in m an:",
  "ts||Width:||de": "Breite:",
  "ts||Height:||de": "Höhe:",
  "ts||Radius||de": "Radius",
  "ts||Give a radius in m:||de": "Geben Sie einen Radius in m an:",
  "ts||DMS Point Tool||de": "DMS-Punkt-Tool",
  "ts||Latitude||de": "Breite",
  "ts||Longitude||de": "Länge",
  "ts||Degrees||de": "Abschlüsse",
  "ts||Minutes||de": "Minuten",
  "ts||Seconds||de": "Sekunden",
  "ts||Direction||de": "Richtung",
  "ts||XY Point drawing tool||de": "XY-Punkt-Zeichenwerkzeug",
  "ts||Selection made in %1 perimeter||de": "Auswahl erfolgt im Umfang %1",
  "ts||Save this tab's results||de": "Speichern Sie die Ergebnisse dieser Registerkarte",
  "ts||Save all results||de": "Speichern Sie alle Ergebnisse",
  "ts||Export the selection as a memory layer||de": "Exportieren Sie die Auswahl als Speicherebene",
  "ts||Export all tabs as a memory layer||de": "Exportieren Sie alle Registerkarten als Speicherebene",
  "ts||Zoom to selected attributes||de": "Zoomen Sie auf ausgewählte Attribute",
  "ts||Highlight feature's geometry||de": "Heben Sie die Geometrie des Features hervor",
  "ts||Settings||de": "Einstellungen",
  "ts||Loading...||de": "Laden...",
  "ts||Rename window||de": "Fenster umbenennen",
  "ts||Enter a new title:||de": "Geben Sie einen neuen Titel ein:",
  "ts||Highlight feature's centroid||de": "Markieren Sie den Schwerpunkt des Features",
  "ts||Extracts in {name}||de": "Auszüge in {name}",
  "ts||Session||de": "Sitzung",
  "ts||Extract {title}||de": "Extrahieren Sie {title}",
  "ts||Tab {index}||de": "Registerkarte {index}",
  "ts||Extract {}||de": "Extrahieren Sie {}",
  "ts||Extracts in {}||de": "Auszüge in {}",
  "ts||No items were selected||de": "Es wurden keine Elemente ausgewählt",
  "ts||Selected items: {nb} Area: {area} m²||de": "Ausgewählte Artikel: {nb} Fläche: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||de": "Ausgewählte Elemente: {nb} - Länge: {lenght}m",
  "ts||Selected items: {nb}||de": "Ausgewählte Elemente: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||de": "[highlight_features] Aktualisierung der Statusleiste fehlgeschlagen: {e_sb}",
  "ts||Apply||de": "Anwenden",
  "ts||Cancel||de": "Stornieren",
  "ts||Sheet||de": "Blatt",
  "ts||Error||de": "Fehler",
  "ts||Cannot create export folder.||de": "Exportordner kann nicht erstellt werden.",
  "ts||Selection made in||de": "Auswahl getroffen in",
  "ts||Information||de": "Information",
  "ts||No active tab found.||de": "Keine aktive Registerkarte gefunden.",
  "ts||No data to save.||de": "Keine Daten zum Speichern vorhanden.",
  "ts||Save in...||de": "Sparen Sie in...",
  "ts||OpenDocument Spreadsheet (*.ods)||de": "OpenDocument-Tabelle (*.ods)",
  "ts||Unable to replace the existing file.||de": "Die vorhandene Datei kann nicht ersetzt werden.",
  "ts||Please close it if it is open in another application, then try again.||de": "Bitte schließen Sie es, wenn es in einer anderen Anwendung geöffnet ist, und versuchen Sie es dann erneut.",
  "ts||{path}||de": "{path}",
  "ts||Unable to write file:||de": "Datei kann nicht geschrieben werden:",
  "ts||{e_rep}||de": "{e_rep}",
  "ts||Open file?||de": "Datei öffnen?",
  "ts||ODS workbook created successfully:||de": "ODS-Arbeitsmappe erfolgreich erstellt:",
  "ts||Open||de": "Offen",
  "ts||Unable to open the ODS file automatically:||de": "Die ODS-Datei kann nicht automatisch geöffnet werden:",
  "ts||{e_open}||de": "{e_open}",
  "ts||Give a name to the item:||de": "Geben Sie dem Artikel einen Namen:",
  "ts||Name…||de": "Name…",
  "ts||Text…||de": "Text…",
  "ts||Drawing||de": "Zeichnung",
  "ts||Add text||de": "Text hinzufügen",
  "ts||Type the text to display:||de": "Geben Sie den anzuzeigenden Text ein:",
  "ts||Add point||de": "Punkt hinzufügen",
  "ts||Give a name to the point:||de": "Geben Sie dem Punkt einen Namen:",
  "ts||Point…||de": "Punkt…",
  "ts||Add line||de": "Zeile hinzufügen",
  "ts||Give a name to the line:||de": "Geben Sie der Zeile einen Namen:",
  "ts||Line…||de": "Linie…",
  "ts||Add polygon||de": "Polygon hinzufügen",
  "ts||Give a name to the polygon:||de": "Geben Sie dem Polygon einen Namen:",
  "ts||Polygon…||de": "Polygon…",
  "ts||Buffer selection||de": "Pufferauswahl",
  "ts||Name this selection (buffer):||de": "Benennen Sie diese Auswahl (Puffer):",
  "ts||Buffer…||de": "Puffer…",
  "ts||Add to an existing layer||de": "Zu einer vorhandenen Ebene hinzufügen",
  "ts||Selecting...||de": "Auswählen...",
  "ts||Pass||de": "Passieren",
  "ts||Drawings||de": "Zeichnungen",
  "ts||DMS Point drawing tool||de": "DMS-Punktzeichnungstool",
  "ts||Text drawing tool||de": "Werkzeug zum Zeichnen von Texten",
  "ts||Point drawing tool||de": "Punktzeichenwerkzeug",
  "ts||Line drawing tool||de": "Strichzeichnungswerkzeug",
  "ts||Rectangle drawing tool||de": "Rechteck-Zeichenwerkzeug",
  "ts||Circle drawing tool||de": "Werkzeug zum Zeichnen von Kreisen",
  "ts||Polygon drawing tool||de": "Polygon-Zeichenwerkzeug",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||de": "Pufferzeichnung mit polygonaler Auswahl von Objekten in der ausgewählten Ebene",
  "ts||Buffer drawing on objects in selected layer||de": "Pufferzeichnung auf Objekten in der ausgewählten Ebene",
  "ts||Install the Gestion_crise plugin||de": "Installieren Sie das Crisis_management-Plugin",
  "ts||Help / User manual||de": "Hilfe / Benutzerhandbuch",
  "ts||No selection||de": "Keine Auswahl",
  "ts||No selected items found in visible vector layers.||de": "In den sichtbaren Vektorebenen wurden keine ausgewählten Elemente gefunden.",
  "ts||XY point drawing tool||de": "XY-Punkt-Zeichenwerkzeug",
  "ts||DMS point drawing tool||de": "DMS-Punktzeichnungstool",
  "ts||Saisie incorrecte ou clic sur Annuler||de": "Falsche Eingabe oder klicken Sie auf Abbrechen",
  "ts||Invalid input !||de": "Ungültige Eingabe!",
  "ts||Buffer drawing tool on the selected layer||de": "Puffer-Zeichenwerkzeug auf der ausgewählten Ebene",
  "ts||Polygon buffer drawing tool on the selected layer||de": "Zeichenwerkzeug für Polygonpuffer auf der ausgewählten Ebene",
  "ts||Left click to place a text.||de": "Klicken Sie mit der linken Maustaste, um einen Text zu platzieren.",
  "ts||Left click to place a point.||de": "Klicken Sie mit der linken Maustaste, um einen Punkt zu platzieren.",
  "ts||Left click to place points.||de": "Klicken Sie mit der linken Maustaste, um Punkte zu platzieren.",
  "ts||Right click to confirm.||de": "Klicken Sie zur Bestätigung mit der rechten Maustaste.",
  "ts||Maintain the left click to draw a rectangle.||de": "Halten Sie die linke Maustaste gedrückt, um ein Rechteck zu zeichnen.",
  "ts||Maintain the left click to draw a circle.||de": "Halten Sie die linke Maustaste gedrückt, um einen Kreis zu zeichnen.",
  "ts||Simple left click to give a perimeter.||de": "Klicken Sie einfach mit der linken Maustaste, um einen Umfang festzulegen.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||de": "Wählen Sie im Ebenenbaum eine Vektorebene und dann eine Entität auf der Karte aus.",
  "ts||Length: {value} m||de": "Länge: {value} m",
  "ts||Area: {value} m²||de": "Fläche: {value} m²",
  "ts||No object selected||de": "Kein Objekt ausgewählt",
  "ts||No object was found under the click.||de": "Unter dem Klick wurde kein Objekt gefunden.",
  "ts||Please click directly on an object of the active layer.||de": "Bitte klicken Sie direkt auf ein Objekt der aktiven Ebene.",
  "ts||Buffer creation||de": "Puffererstellung",
  "ts||Do you want to create a buffer around the selected object?||de": "Möchten Sie einen Puffer um das ausgewählte Objekt erstellen?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||de": "Wählen Sie, ob die Auswahl das Objekt selbst oder einen Puffer um es herum verwenden soll.",
  "ts||Create buffer||de": "Puffer erstellen",
  "ts||No buffer||de": "Kein Puffer",
  "ts||Buffer size||de": "Puffergröße",
  "ts||Enter the buffer size in meters:||de": "Geben Sie die Puffergröße in Metern ein:",
  "ts||(works only with a metric coordinate reference system)||de": "(funktioniert nur mit einem metrischen Koordinatenreferenzsystem)",
  "ts||Circle name||de": "Kreisname",
  "ts||Enter a name for the circle:||de": "Geben Sie einen Namen für den Kreis ein:",
  "ts||Circle…||de": "Kreis…",
  "ts||Rectangle name||de": "Rechteckname",
  "ts||Enter a name for the rectangle:||de": "Geben Sie einen Namen für das Rechteck ein:",
  "ts||Rectangle…||de": "Rechteck…",
  "ts||Polygon name||de": "Polygonname",
  "ts||Enter a name for the polygon:||de": "Geben Sie einen Namen für das Polygon ein:",
  "ts||Buffer name||de": "Puffername",
  "ts||Enter a name for the buffer:||de": "Geben Sie einen Namen für den Puffer ein:",
  "ts||Choosing a selection||de": "Eine Auswahl treffen",
  "ts||{name} drawn.||de": "{name} gezeichnet.",
  "ts||Make a selection within its extent?||de": "Eine Auswahl innerhalb seines Umfangs treffen?",
  "ts||No group found||de": "Keine Gruppe gefunden",
  "ts||Aucun groupe n’existe dans le projet.||de": "Im Projekt sind keine Gruppen vorhanden.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||de": "Erstellen Sie eine Gruppe und wählen Sie die Ebenen aus, die Sie darin einfügen möchten:",
  "ts||New group name||de": "Neuer Gruppenname",
  "ts||Available layers||de": "Verfügbare Ebenen",
  "ts||You must name the group.||de": "Sie müssen der Gruppe einen Namen geben.",
  "ts||Group created||de": "Gruppe erstellt",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||de": "Die Gruppe {new_group_name} wurde erstellt und die ausgewählten Ebenen wurden verschoben.",
  "ts||Perimeter||de": "Perimeter",
  "ts||Give a perimeter in m:||de": "Geben Sie einen Umfang in m an:",
  "ts||(works only with metric crs)||de": "(funktioniert nur mit metrischen CRs)",
  "ts||End of selection||de": "Ende der Auswahl",
  "ts||The {sel_group} group has been unchecked.||de": "Die Gruppe {sel_group} wurde deaktiviert.",
  "ts||Warning||de": "Warnung",
  "ts||You didn't click on a layer's attribute !||de": "Sie haben nicht auf das Attribut einer Ebene geklickt!",
  "ts||You must give a non-null value for a point's or line's perimeter!||de": "Sie müssen einen Wert ungleich Null für den Umfang eines Punktes oder einer Linie angeben!",
  "ts||There is no selected layer, or it is not vector nor visible!||de": "Es ist keine Ebene ausgewählt, oder sie ist weder Vektor noch sichtbar!",
  "ts||No groups||de": "Keine Gruppen",
  "ts||All groups are already checked.||de": "Alle Gruppen sind bereits überprüft.",
  "ts||Choose a group for selection||de": "Wählen Sie eine Gruppe zur Auswahl aus",
  "ts||Choose a group from the list:||de": "Wählen Sie eine Gruppe aus der Liste:",
  "ts||WARNING!||de": "WARNUNG!",
  "ts||Command not available:||de": "Befehl nicht verfügbar:",
  "ts||empty project.||de": "leeres Projekt.",
  "ts||Start again||de": "Beginnen Sie erneut",
  "ts||No layer or group is selected.||de": "Es ist keine Ebene oder Gruppe ausgewählt.",
  "ts||Start again.||de": "Beginnen Sie erneut.",
  "ts||Selection not possible.||de": "Auswahl nicht möglich.",
  "ts||The checked layer is not a polygon.||de": "Der markierte Layer ist kein Polygon.",
  "ts||No layer is selected in the Layer Manager.||de": "Im Layer-Manager ist kein Layer ausgewählt.",
  "ts||QdrawEVT Help - Gestion_crise||de": "QdrawEVT-Hilfe – Crisis_management",
  "ts||No help file was found in the 'help' folder.||de": "Im Ordner „help“ wurde keine Hilfedatei gefunden.",
  "ts||Unable to read the help file: {error}||de": "Die Hilfedatei kann nicht gelesen werden: {error}",
  "ts||Close||de": "Schließen",
  "ts||QdrawEVT - Settings||de": "QdrawEVT – Einstellungen",
  "ts||Change the drawing color||de": "Ändern Sie die Zeichenfarbe",
  "ts||Change text font||de": "Textschriftart ändern",
  "ts||Change text color||de": "Textfarbe ändern",
  "ts||Create the group and the event layers||de": "Erstellen Sie die Gruppe und die Ereignisebenen",
  "ts||Enjeux||de": "Herausforderungen",
  "ts||Aléas/risques||de": "Gefahren/Risiken",
  "ts||RDI||de": "RDI",
  "ts||Administratif||de": "Administrativ",
  "ts||Fonds de plan||de": "Planen Sie Mittel",
  "ts||Creation of event shapefile||de": "Erstellung eines Event-Shapefiles",
  "ts||Possible only in a saved project.||de": "Nur in einem gespeicherten Projekt möglich.",
  "ts||Error when creating shapefile||de": "Fehler beim Erstellen des Shapefiles",
  "ts||QdrawEVT||de": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||de": "Einfaches Zeichnen und Auswählen von Elementen innerhalb des Zeichnungs-Footprints",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||de": "Mit QdrawEVT können Sie Punkte, Linien und Polygone direkt auf der Karte zeichnen und eine Auswahl sich überschneidender Ebenen durchführen.",
  "ts||A dedicated help is available from the plugin menu.||de": "Eine spezielle Hilfe ist im Plugin-Menü verfügbar.",
  "ts||drawing, selection, events, vector, tools||de": "Zeichnung, Auswahl, Ereignisse, Vektor, Werkzeuge",
  "ts||François Thévand||de": "François Thévand",
  "ts||francois.thevand@gmail.com||de": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||de": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||de": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||nl": "Rechthoekig formaat",
  "ts||Give a size in m:||nl": "Geef een maat in m:",
  "ts||Width:||nl": "Breedte:",
  "ts||Height:||nl": "Hoogte:",
  "ts||Radius||nl": "Radius",
  "ts||Give a radius in m:||nl": "Geef een straal in m:",
  "ts||DMS Point Tool||nl": "DMS-punttool",
  "ts||Latitude||nl": "Breedte",
  "ts||Longitude||nl": "Lengte",
  "ts||Degrees||nl": "Graden",
  "ts||Minutes||nl": "Notulen",
  "ts||Seconds||nl": "Seconden",
  "ts||Direction||nl": "Richting",
  "ts||XY Point drawing tool||nl": "XY-punt tekengereedschap",
  "ts||Selection made in %1 perimeter||nl": "Selectie gemaakt in %1 omtrek",
  "ts||Save this tab's results||nl": "Bewaar de resultaten van dit tabblad",
  "ts||Save all results||nl": "Bewaar alle resultaten",
  "ts||Export the selection as a memory layer||nl": "Exporteer de selectie als een geheugenlaag",
  "ts||Export all tabs as a memory layer||nl": "Exporteer alle tabbladen als geheugenlaag",
  "ts||Zoom to selected attributes||nl": "Zoom naar geselecteerde attributen",
  "ts||Highlight feature's geometry||nl": "Markeer de geometrie van het object",
  "ts||Settings||nl": "Instellingen",
  "ts||Loading...||nl": "Laden...",
  "ts||Rename window||nl": "Venster hernoemen",
  "ts||Enter a new title:||nl": "Voer een nieuwe titel in:",
  "ts||Highlight feature's centroid||nl": "Markeer het zwaartepunt van de functie",
  "ts||Extracts in {name}||nl": "Uittreksels in {name}",
  "ts||Session||nl": "Sessie",
  "ts||Extract {title}||nl": "Extraheer {title}",
  "ts||Tab {index}||nl": "Tabblad {index}",
  "ts||Extract {}||nl": "Extraheer {}",
  "ts||Extracts in {}||nl": "Uittreksels in {}",
  "ts||No items were selected||nl": "Er zijn geen items geselecteerd",
  "ts||Selected items: {nb} Area: {area} m²||nl": "Geselecteerde artikelen: {nb} Oppervlakte: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||nl": "Geselecteerde items: {nb} - Lengte: {lenght}m",
  "ts||Selected items: {nb}||nl": "Geselecteerde artikelen: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||nl": "[highlight_features] Statusbalkupdate mislukt: {e_sb}",
  "ts||Apply||nl": "Toepassen",
  "ts||Cancel||nl": "Annuleren",
  "ts||Sheet||nl": "Laken",
  "ts||Error||nl": "Fout",
  "ts||Cannot create export folder.||nl": "Kan exportmap niet maken.",
  "ts||Selection made in||nl": "Selectie gemaakt",
  "ts||Information||nl": "Informatie",
  "ts||No active tab found.||nl": "Geen actief tabblad gevonden.",
  "ts||No data to save.||nl": "Geen gegevens om op te slaan.",
  "ts||Save in...||nl": "Opslaan binnen...",
  "ts||OpenDocument Spreadsheet (*.ods)||nl": "OpenDocument-spreadsheet (*.ods)",
  "ts||Unable to replace the existing file.||nl": "Kan het bestaande bestand niet vervangen.",
  "ts||Please close it if it is open in another application, then try again.||nl": "Sluit het programma als het in een andere toepassing geopend is en probeer het opnieuw.",
  "ts||{path}||nl": "{path}",
  "ts||Unable to write file:||nl": "Kan bestand niet schrijven:",
  "ts||{e_rep}||nl": "{e_rep}",
  "ts||Open file?||nl": "Bestand openen?",
  "ts||ODS workbook created successfully:||nl": "ODS-werkmap is succesvol gemaakt:",
  "ts||Open||nl": "Open",
  "ts||Unable to open the ODS file automatically:||nl": "Kan het ODS-bestand niet automatisch openen:",
  "ts||{e_open}||nl": "{e_open}",
  "ts||Give a name to the item:||nl": "Geef een naam aan het artikel:",
  "ts||Name…||nl": "Naam…",
  "ts||Text…||nl": "Tekst…",
  "ts||Drawing||nl": "Tekening",
  "ts||Add text||nl": "Voeg tekst toe",
  "ts||Type the text to display:||nl": "Typ de tekst die u wilt weergeven:",
  "ts||Add point||nl": "Punt toevoegen",
  "ts||Give a name to the point:||nl": "Geef een naam aan het punt:",
  "ts||Point…||nl": "Punt…",
  "ts||Add line||nl": "Lijn toevoegen",
  "ts||Give a name to the line:||nl": "Geef een naam aan de regel:",
  "ts||Line…||nl": "Lijn…",
  "ts||Add polygon||nl": "Veelhoek toevoegen",
  "ts||Give a name to the polygon:||nl": "Geef een naam aan de polygoon:",
  "ts||Polygon…||nl": "Veelhoek…",
  "ts||Buffer selection||nl": "Bufferselectie",
  "ts||Name this selection (buffer):||nl": "Geef deze selectie een naam (buffer):",
  "ts||Buffer…||nl": "Buffer…",
  "ts||Add to an existing layer||nl": "Voeg toe aan een bestaande laag",
  "ts||Selecting...||nl": "Selecteren...",
  "ts||Pass||nl": "Doorgang",
  "ts||Drawings||nl": "Tekeningen",
  "ts||DMS Point drawing tool||nl": "DMS Punttekentool",
  "ts||Text drawing tool||nl": "Gereedschap voor het tekenen van tekst",
  "ts||Point drawing tool||nl": "Punt tekengereedschap",
  "ts||Line drawing tool||nl": "Lijntekenhulpmiddel",
  "ts||Rectangle drawing tool||nl": "Rechthoekig tekengereedschap",
  "ts||Circle drawing tool||nl": "Gereedschap voor het tekenen van cirkels",
  "ts||Polygon drawing tool||nl": "Veelhoek tekengereedschap",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||nl": "Buffertekening met veelhoekige selectie van objecten in de geselecteerde laag",
  "ts||Buffer drawing on objects in selected layer||nl": "Buffertekening op objecten in de geselecteerde laag",
  "ts||Install the Gestion_crise plugin||nl": "Installeer de Crisis_management-plug-in",
  "ts||Help / User manual||nl": "Hulp / Gebruikershandleiding",
  "ts||No selection||nl": "Geen selectie",
  "ts||No selected items found in visible vector layers.||nl": "Geen geselecteerde items gevonden in zichtbare vectorlagen.",
  "ts||XY point drawing tool||nl": "XY-punt tekengereedschap",
  "ts||DMS point drawing tool||nl": "DMS-punttekentool",
  "ts||Saisie incorrecte ou clic sur Annuler||nl": "Verkeerde invoer of klik op Annuleren",
  "ts||Invalid input !||nl": "Ongeldige invoer!",
  "ts||Buffer drawing tool on the selected layer||nl": "Buffer tekengereedschap op de geselecteerde laag",
  "ts||Polygon buffer drawing tool on the selected layer||nl": "Tekengereedschap voor polygoonbuffer op de geselecteerde laag",
  "ts||Left click to place a text.||nl": "Klik met de linkermuisknop om een ​​tekst te plaatsen.",
  "ts||Left click to place a point.||nl": "Klik met de linkermuisknop om een ​​punt te plaatsen.",
  "ts||Left click to place points.||nl": "Klik met de linkermuisknop om punten te plaatsen.",
  "ts||Right click to confirm.||nl": "Klik met de rechtermuisknop om te bevestigen.",
  "ts||Maintain the left click to draw a rectangle.||nl": "Houd de linkerklik ingedrukt om een ​​rechthoek te tekenen.",
  "ts||Maintain the left click to draw a circle.||nl": "Houd de linkerklik ingedrukt om een ​​cirkel te tekenen.",
  "ts||Simple left click to give a perimeter.||nl": "Klik met de linkermuisknop om een ​​omtrek weer te geven.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||nl": "Selecteer een vectorlaag in de Lagenboom en selecteer vervolgens een entiteit op de kaart.",
  "ts||Length: {value} m||nl": "Lengte: {value} m",
  "ts||Area: {value} m²||nl": "Oppervlakte: {value} m²",
  "ts||No object selected||nl": "Geen object geselecteerd",
  "ts||No object was found under the click.||nl": "Er is geen object gevonden onder de klik.",
  "ts||Please click directly on an object of the active layer.||nl": "Klik rechtstreeks op een object van de actieve laag.",
  "ts||Buffer creation||nl": "Buffercreatie",
  "ts||Do you want to create a buffer around the selected object?||nl": "Wilt u een buffer rondom het geselecteerde object creëren?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||nl": "Kies of de selectie het object zelf moet gebruiken of een buffer eromheen.",
  "ts||Create buffer||nl": "Buffer maken",
  "ts||No buffer||nl": "Geen buffer",
  "ts||Buffer size||nl": "Buffergrootte",
  "ts||Enter the buffer size in meters:||nl": "Voer de buffergrootte in meters in:",
  "ts||(works only with a metric coordinate reference system)||nl": "(werkt alleen met een metrisch coördinatenreferentiesysteem)",
  "ts||Circle name||nl": "Naam van cirkel",
  "ts||Enter a name for the circle:||nl": "Voer een naam in voor de kring:",
  "ts||Circle…||nl": "Cirkel…",
  "ts||Rectangle name||nl": "Rechthoekige naam",
  "ts||Enter a name for the rectangle:||nl": "Voer een naam in voor de rechthoek:",
  "ts||Rectangle…||nl": "Rechthoek…",
  "ts||Polygon name||nl": "Naam van de polygoon",
  "ts||Enter a name for the polygon:||nl": "Voer een naam in voor de polygoon:",
  "ts||Buffer name||nl": "Buffernaam",
  "ts||Enter a name for the buffer:||nl": "Voer een naam in voor de buffer:",
  "ts||Choosing a selection||nl": "Een selectie kiezen",
  "ts||{name} drawn.||nl": "{name} getekend.",
  "ts||Make a selection within its extent?||nl": "Een selectie maken binnen de reikwijdte ervan?",
  "ts||No group found||nl": "Geen groep gevonden",
  "ts||Aucun groupe n’existe dans le projet.||nl": "Er bestaan ​​geen groepen in het project.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||nl": "Maak een groep en kies de lagen die u erin wilt plaatsen:",
  "ts||New group name||nl": "Nieuwe groepsnaam",
  "ts||Available layers||nl": "Beschikbare lagen",
  "ts||You must name the group.||nl": "U moet de groep een naam geven.",
  "ts||Group created||nl": "Groep gemaakt",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||nl": "De groep {new_group_name} is gemaakt en de geselecteerde lagen zijn verplaatst.",
  "ts||Perimeter||nl": "Omtrek",
  "ts||Give a perimeter in m:||nl": "Geef een omtrek in m:",
  "ts||(works only with metric crs)||nl": "(werkt alleen met metrische crs)",
  "ts||End of selection||nl": "Einde selectie",
  "ts||The {sel_group} group has been unchecked.||nl": "De groep {sel_group} is uitgeschakeld.",
  "ts||Warning||nl": "Waarschuwing",
  "ts||You didn't click on a layer's attribute !||nl": "U heeft niet op het attribuut van een laag geklikt!",
  "ts||You must give a non-null value for a point's or line's perimeter!||nl": "U moet een niet-nulwaarde opgeven voor de omtrek van een punt of lijn!",
  "ts||There is no selected layer, or it is not vector nor visible!||nl": "Er is geen geselecteerde laag, of deze is niet vector en ook niet zichtbaar!",
  "ts||No groups||nl": "Geen groepen",
  "ts||All groups are already checked.||nl": "Alle groepen zijn al aangevinkt.",
  "ts||Choose a group for selection||nl": "Kies een groep voor selectie",
  "ts||Choose a group from the list:||nl": "Kies een groep uit de lijst:",
  "ts||WARNING!||nl": "WAARSCHUWING!",
  "ts||Command not available:||nl": "Commando niet beschikbaar:",
  "ts||empty project.||nl": "leeg project.",
  "ts||Start again||nl": "Begin opnieuw",
  "ts||No layer or group is selected.||nl": "Er is geen laag of groep geselecteerd.",
  "ts||Start again.||nl": "Begin opnieuw.",
  "ts||Selection not possible.||nl": "Selectie niet mogelijk.",
  "ts||The checked layer is not a polygon.||nl": "De aangevinkte laag is geen polygoon.",
  "ts||No layer is selected in the Layer Manager.||nl": "Er is geen laag geselecteerd in Laagbeheer.",
  "ts||QdrawEVT Help - Gestion_crise||nl": "QdrawEVT Hulp - Crisismanagement",
  "ts||No help file was found in the 'help' folder.||nl": "Er is geen helpbestand gevonden in de map 'help'.",
  "ts||Unable to read the help file: {error}||nl": "Kan het helpbestand niet lezen: {error}",
  "ts||Close||nl": "Dichtbij",
  "ts||QdrawEVT - Settings||nl": "QdrawEVT - Instellingen",
  "ts||Change the drawing color||nl": "Verander de tekeningkleur",
  "ts||Change text font||nl": "Wijzig het lettertype van de tekst",
  "ts||Change text color||nl": "Tekstkleur wijzigen",
  "ts||Create the group and the event layers||nl": "Maak de groep en de gebeurtenislagen",
  "ts||Enjeux||nl": "Uitdagingen",
  "ts||Aléas/risques||nl": "Gevaren/risico's",
  "ts||RDI||nl": "RDI",
  "ts||Administratif||nl": "Administratief",
  "ts||Fonds de plan||nl": "Plan fondsen",
  "ts||Creation of event shapefile||nl": "Creëren van een evenement-shapefile",
  "ts||Possible only in a saved project.||nl": "Alleen mogelijk in een opgeslagen project.",
  "ts||Error when creating shapefile||nl": "Fout bij het maken van een shapefile",
  "ts||QdrawEVT||nl": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||nl": "Teken en selecteer eenvoudig entiteiten binnen de tekeningvoetafdruk",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||nl": "Met QdrawEVT kunt u punten, lijnen en polygonen rechtstreeks op de kaart tekenen en selecties van elkaar kruisende lagen uitvoeren.",
  "ts||A dedicated help is available from the plugin menu.||nl": "Er is speciale hulp beschikbaar via het plug-inmenu.",
  "ts||drawing, selection, events, vector, tools||nl": "tekenen, selectie, evenementen, vector, gereedschappen",
  "ts||François Thévand||nl": "François Thevand",
  "ts||francois.thevand@gmail.com||nl": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||nl": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||nl": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||sv": "Rektangelstorlek",
  "ts||Give a size in m:||sv": "Ange en storlek i m:",
  "ts||Width:||sv": "Bredd:",
  "ts||Height:||sv": "Höjd:",
  "ts||Radius||sv": "Radie",
  "ts||Give a radius in m:||sv": "Ge en radie i m:",
  "ts||DMS Point Tool||sv": "DMS Point Tool",
  "ts||Latitude||sv": "Latitud",
  "ts||Longitude||sv": "Longitud",
  "ts||Degrees||sv": "Grader",
  "ts||Minutes||sv": "Minuter",
  "ts||Seconds||sv": "Sekunder",
  "ts||Direction||sv": "Riktning",
  "ts||XY Point drawing tool||sv": "XY Point ritverktyg",
  "ts||Selection made in %1 perimeter||sv": "Val gjort i %1 omkrets",
  "ts||Save this tab's results||sv": "Spara den här flikens resultat",
  "ts||Save all results||sv": "Spara alla resultat",
  "ts||Export the selection as a memory layer||sv": "Exportera markeringen som ett minneslager",
  "ts||Export all tabs as a memory layer||sv": "Exportera alla flikar som ett minneslager",
  "ts||Zoom to selected attributes||sv": "Zooma till valda attribut",
  "ts||Highlight feature's geometry||sv": "Markera funktionens geometri",
  "ts||Settings||sv": "Inställningar",
  "ts||Loading...||sv": "Belastning...",
  "ts||Rename window||sv": "Byt namn på fönstret",
  "ts||Enter a new title:||sv": "Ange en ny titel:",
  "ts||Highlight feature's centroid||sv": "Markera funktionens tyngdpunkt",
  "ts||Extracts in {name}||sv": "Utdrag i {name}",
  "ts||Session||sv": "Session",
  "ts||Extract {title}||sv": "Extrahera {title}",
  "ts||Tab {index}||sv": "Fliken {index}",
  "ts||Extract {}||sv": "Extrahera {}",
  "ts||Extracts in {}||sv": "Utdrag i {}",
  "ts||No items were selected||sv": "Inga objekt har valts",
  "ts||Selected items: {nb} Area: {area} m²||sv": "Valda föremål: {nb} Yta: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||sv": "Valda föremål: {nb} - Längd: {lenght}m",
  "ts||Selected items: {nb}||sv": "Valda objekt: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||sv": "[highlight_features] Uppdateringen av statusfältet misslyckades: {e_sb}",
  "ts||Apply||sv": "Tillämpas",
  "ts||Cancel||sv": "Avboka",
  "ts||Sheet||sv": "Ark",
  "ts||Error||sv": "Fel",
  "ts||Cannot create export folder.||sv": "Kan inte skapa exportmapp.",
  "ts||Selection made in||sv": "Urval gjort i",
  "ts||Information||sv": "Information",
  "ts||No active tab found.||sv": "Ingen aktiv flik hittades.",
  "ts||No data to save.||sv": "Ingen data att spara.",
  "ts||Save in...||sv": "Spara i...",
  "ts||OpenDocument Spreadsheet (*.ods)||sv": "OpenDocument Spreadsheet (*.ods)",
  "ts||Unable to replace the existing file.||sv": "Det går inte att ersätta den befintliga filen.",
  "ts||Please close it if it is open in another application, then try again.||sv": "Stäng den om den är öppen i ett annat program, försök sedan igen.",
  "ts||{path}||sv": "{path}",
  "ts||Unable to write file:||sv": "Kan inte skriva fil:",
  "ts||{e_rep}||sv": "{e_rep}",
  "ts||Open file?||sv": "Öppna filen?",
  "ts||ODS workbook created successfully:||sv": "ODS-arbetsbok skapad framgångsrikt:",
  "ts||Open||sv": "Öppna",
  "ts||Unable to open the ODS file automatically:||sv": "Det går inte att öppna ODS-filen automatiskt:",
  "ts||{e_open}||sv": "{e_open}",
  "ts||Give a name to the item:||sv": "Ge objektet ett namn:",
  "ts||Name…||sv": "Namn…",
  "ts||Text…||sv": "Text…",
  "ts||Drawing||sv": "Ritning",
  "ts||Add text||sv": "Lägg till text",
  "ts||Type the text to display:||sv": "Skriv texten som ska visas:",
  "ts||Add point||sv": "Lägg till punkt",
  "ts||Give a name to the point:||sv": "Ge ett namn till saken:",
  "ts||Point…||sv": "Punkt…",
  "ts||Add line||sv": "Lägg till rad",
  "ts||Give a name to the line:||sv": "Ge raden ett namn:",
  "ts||Line…||sv": "Linje…",
  "ts||Add polygon||sv": "Lägg till polygon",
  "ts||Give a name to the polygon:||sv": "Ge ett namn till polygonen:",
  "ts||Polygon…||sv": "Polygon…",
  "ts||Buffer selection||sv": "Val av buffert",
  "ts||Name this selection (buffer):||sv": "Namnge detta urval (buffert):",
  "ts||Buffer…||sv": "Buffert…",
  "ts||Add to an existing layer||sv": "Lägg till ett befintligt lager",
  "ts||Selecting...||sv": "Väljer...",
  "ts||Pass||sv": "Passera",
  "ts||Drawings||sv": "Ritningar",
  "ts||DMS Point drawing tool||sv": "DMS Point ritverktyg",
  "ts||Text drawing tool||sv": "Textritningsverktyg",
  "ts||Point drawing tool||sv": "Punktritningsverktyg",
  "ts||Line drawing tool||sv": "Linjeritningsverktyg",
  "ts||Rectangle drawing tool||sv": "Rektangel ritverktyg",
  "ts||Circle drawing tool||sv": "Cirkelritverktyg",
  "ts||Polygon drawing tool||sv": "Polygon ritverktyg",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||sv": "Bufferritning med polygonal markering av objekt i det valda lagret",
  "ts||Buffer drawing on objects in selected layer||sv": "Bufferritning på objekt i valt lager",
  "ts||Install the Gestion_crise plugin||sv": "Installera insticksprogrammet Crisis_management",
  "ts||Help / User manual||sv": "Hjälp / Användarmanual",
  "ts||No selection||sv": "Inget urval",
  "ts||No selected items found in visible vector layers.||sv": "Inga markerade objekt hittades i synliga vektorlager.",
  "ts||XY point drawing tool||sv": "XY-punktritverktyg",
  "ts||DMS point drawing tool||sv": "DMS punktritningsverktyg",
  "ts||Saisie incorrecte ou clic sur Annuler||sv": "Felaktig inmatning eller klicka på Avbryt",
  "ts||Invalid input !||sv": "Ogiltig inmatning!",
  "ts||Buffer drawing tool on the selected layer||sv": "Buffertritningsverktyg på det valda lagret",
  "ts||Polygon buffer drawing tool on the selected layer||sv": "Polygonbuffert ritverktyg på det valda lagret",
  "ts||Left click to place a text.||sv": "Vänsterklicka för att placera en text.",
  "ts||Left click to place a point.||sv": "Vänsterklicka för att placera en punkt.",
  "ts||Left click to place points.||sv": "Vänsterklicka för att placera poäng.",
  "ts||Right click to confirm.||sv": "Högerklicka för att bekräfta.",
  "ts||Maintain the left click to draw a rectangle.||sv": "Behåll vänsterklicket för att rita en rektangel.",
  "ts||Maintain the left click to draw a circle.||sv": "Behåll vänsterklicket för att rita en cirkel.",
  "ts||Simple left click to give a perimeter.||sv": "Enkelt vänsterklick för att ge en omkrets.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||sv": "Välj ett vektorlager i lagerträdet och välj sedan en enhet på kartan.",
  "ts||Length: {value} m||sv": "Längd: {value} m",
  "ts||Area: {value} m²||sv": "Yta: {value} m²",
  "ts||No object selected||sv": "Inget objekt valt",
  "ts||No object was found under the click.||sv": "Inget objekt hittades under klicket.",
  "ts||Please click directly on an object of the active layer.||sv": "Klicka direkt på ett objekt i det aktiva lagret.",
  "ts||Buffer creation||sv": "Skapande av buffert",
  "ts||Do you want to create a buffer around the selected object?||sv": "Vill du skapa en buffert runt det markerade objektet?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||sv": "Välj om markeringen ska använda själva objektet eller en buffert runt det.",
  "ts||Create buffer||sv": "Skapa buffert",
  "ts||No buffer||sv": "Ingen buffert",
  "ts||Buffer size||sv": "Buffertstorlek",
  "ts||Enter the buffer size in meters:||sv": "Ange buffertstorleken i meter:",
  "ts||(works only with a metric coordinate reference system)||sv": "(fungerar endast med ett metriskt koordinatreferenssystem)",
  "ts||Circle name||sv": "Cirkelnamn",
  "ts||Enter a name for the circle:||sv": "Ange ett namn för cirkeln:",
  "ts||Circle…||sv": "Cirkel…",
  "ts||Rectangle name||sv": "Rektangelnamn",
  "ts||Enter a name for the rectangle:||sv": "Ange ett namn för rektangeln:",
  "ts||Rectangle…||sv": "Rektangel…",
  "ts||Polygon name||sv": "Polygonnamn",
  "ts||Enter a name for the polygon:||sv": "Ange ett namn för polygonen:",
  "ts||Buffer name||sv": "Buffertnamn",
  "ts||Enter a name for the buffer:||sv": "Ange ett namn för bufferten:",
  "ts||Choosing a selection||sv": "Att välja ett urval",
  "ts||{name} drawn.||sv": "{name} ritade.",
  "ts||Make a selection within its extent?||sv": "Göra ett urval inom dess omfattning?",
  "ts||No group found||sv": "Ingen grupp hittades",
  "ts||Aucun groupe n’existe dans le projet.||sv": "Det finns inga grupper i projektet.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||sv": "Skapa en grupp och välj de lager som ska läggas i den:",
  "ts||New group name||sv": "Nytt gruppnamn",
  "ts||Available layers||sv": "Tillgängliga lager",
  "ts||You must name the group.||sv": "Du måste namnge gruppen.",
  "ts||Group created||sv": "Grupp skapad",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||sv": "Gruppen {new_group_name} har skapats och de valda lagren har flyttats.",
  "ts||Perimeter||sv": "Omkrets",
  "ts||Give a perimeter in m:||sv": "Ge en omkrets i m:",
  "ts||(works only with metric crs)||sv": "(fungerar bara med metriska crs)",
  "ts||End of selection||sv": "Slut på urval",
  "ts||The {sel_group} group has been unchecked.||sv": "Gruppen {sel_group} har avmarkerats.",
  "ts||Warning||sv": "Varning",
  "ts||You didn't click on a layer's attribute !||sv": "Du klickade inte på ett lagers attribut!",
  "ts||You must give a non-null value for a point's or line's perimeter!||sv": "Du måste ange ett icke-nullvärde för en punkts eller linjes omkrets!",
  "ts||There is no selected layer, or it is not vector nor visible!||sv": "Det finns inget valt lager, eller så är det inte vektor eller synligt!",
  "ts||No groups||sv": "Inga grupper",
  "ts||All groups are already checked.||sv": "Alla grupper är redan kontrollerade.",
  "ts||Choose a group for selection||sv": "Välj en grupp för urval",
  "ts||Choose a group from the list:||sv": "Välj en grupp från listan:",
  "ts||WARNING!||sv": "VARNING!",
  "ts||Command not available:||sv": "Kommandot är inte tillgängligt:",
  "ts||empty project.||sv": "tomt projekt.",
  "ts||Start again||sv": "Börja igen",
  "ts||No layer or group is selected.||sv": "Inget lager eller grupp har valts.",
  "ts||Start again.||sv": "Börja igen.",
  "ts||Selection not possible.||sv": "Val inte möjligt.",
  "ts||The checked layer is not a polygon.||sv": "Det markerade lagret är inte en polygon.",
  "ts||No layer is selected in the Layer Manager.||sv": "Inget lager är valt i lagerhanteraren.",
  "ts||QdrawEVT Help - Gestion_crise||sv": "QdrawEVT Hjälp - Krishantering",
  "ts||No help file was found in the 'help' folder.||sv": "Ingen hjälpfil hittades i 'hjälp'-mappen.",
  "ts||Unable to read the help file: {error}||sv": "Det går inte att läsa hjälpfilen: {error}",
  "ts||Close||sv": "Nära",
  "ts||QdrawEVT - Settings||sv": "QdrawEVT - Inställningar",
  "ts||Change the drawing color||sv": "Ändra ritningsfärgen",
  "ts||Change text font||sv": "Ändra texttypsnitt",
  "ts||Change text color||sv": "Ändra textfärg",
  "ts||Create the group and the event layers||sv": "Skapa gruppen och händelselagren",
  "ts||Enjeux||sv": "Utmaningar",
  "ts||Aléas/risques||sv": "Faror/risker",
  "ts||RDI||sv": "RDI",
  "ts||Administratif||sv": "Administrativ",
  "ts||Fonds de plan||sv": "Planera medel",
  "ts||Creation of event shapefile||sv": "Skapande av händelse shapefil",
  "ts||Possible only in a saved project.||sv": "Endast möjligt i ett sparat projekt.",
  "ts||Error when creating shapefile||sv": "Fel när shapefilen skapades",
  "ts||QdrawEVT||sv": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||sv": "Rita och välj enkelt enheter inom ritningsfotavtrycket",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||sv": "QdrawEVT låter dig rita punkter, linjer och polygoner direkt på kartan och utföra urval av skärande lager.",
  "ts||A dedicated help is available from the plugin menu.||sv": "En dedikerad hjälp är tillgänglig från plugin-menyn.",
  "ts||drawing, selection, events, vector, tools||sv": "ritning, urval, händelser, vektor, verktyg",
  "ts||François Thévand||sv": "François Thévand",
  "ts||francois.thevand@gmail.com||sv": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||sv": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||sv": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||no": "Rektangelstørrelse",
  "ts||Give a size in m:||no": "Oppgi en størrelse i m:",
  "ts||Width:||no": "Bredde:",
  "ts||Height:||no": "Høyde:",
  "ts||Radius||no": "Radius",
  "ts||Give a radius in m:||no": "Gi en radius i m:",
  "ts||DMS Point Tool||no": "DMS Point Tool",
  "ts||Latitude||no": "Breddegrad",
  "ts||Longitude||no": "Lengdegrad",
  "ts||Degrees||no": "Grader",
  "ts||Minutes||no": "Minutter",
  "ts||Seconds||no": "Sekunder",
  "ts||Direction||no": "Retning",
  "ts||XY Point drawing tool||no": "XY Point tegneverktøy",
  "ts||Selection made in %1 perimeter||no": "Valg gjort i %1 omkrets",
  "ts||Save this tab's results||no": "Lagre denne fanens resultater",
  "ts||Save all results||no": "Lagre alle resultater",
  "ts||Export the selection as a memory layer||no": "Eksporter utvalget som et minnelag",
  "ts||Export all tabs as a memory layer||no": "Eksporter alle faner som et minnelag",
  "ts||Zoom to selected attributes||no": "Zoom til valgte attributter",
  "ts||Highlight feature's geometry||no": "Fremhev funksjonens geometri",
  "ts||Settings||no": "Innstillinger",
  "ts||Loading...||no": "Laster inn...",
  "ts||Rename window||no": "Gi nytt navn til vinduet",
  "ts||Enter a new title:||no": "Skriv inn en ny tittel:",
  "ts||Highlight feature's centroid||no": "Fremhev funksjonens tyngdepunkt",
  "ts||Extracts in {name}||no": "Utdrag i {name}",
  "ts||Session||no": "Sesjon",
  "ts||Extract {title}||no": "Trekk ut {title}",
  "ts||Tab {index}||no": "Fane {index}",
  "ts||Extract {}||no": "Trekk ut {}",
  "ts||Extracts in {}||no": "Utdrag i {}",
  "ts||No items were selected||no": "Ingen elementer ble valgt",
  "ts||Selected items: {nb} Area: {area} m²||no": "Valgte elementer: {nb} Areal: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||no": "Valgte elementer: {nb} - Lengde: {lenght}m",
  "ts||Selected items: {nb}||no": "Valgte elementer: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||no": "[highlight_features] Oppdatering av statuslinjen mislyktes: {e_sb}",
  "ts||Apply||no": "Søke",
  "ts||Cancel||no": "Kansellere",
  "ts||Sheet||no": "Ark",
  "ts||Error||no": "Feil",
  "ts||Cannot create export folder.||no": "Kan ikke opprette eksportmappe.",
  "ts||Selection made in||no": "Utvalg gjort i",
  "ts||Information||no": "Informasjon",
  "ts||No active tab found.||no": "Fant ingen aktiv fane.",
  "ts||No data to save.||no": "Ingen data å lagre.",
  "ts||Save in...||no": "Lagre i...",
  "ts||OpenDocument Spreadsheet (*.ods)||no": "OpenDocument-regneark (*.ods)",
  "ts||Unable to replace the existing file.||no": "Kan ikke erstatte den eksisterende filen.",
  "ts||Please close it if it is open in another application, then try again.||no": "Lukk den hvis den er åpen i et annet program, og prøv på nytt.",
  "ts||{path}||no": "{path}",
  "ts||Unable to write file:||no": "Kan ikke skrive fil:",
  "ts||{e_rep}||no": "{e_rep}",
  "ts||Open file?||no": "Åpne filen?",
  "ts||ODS workbook created successfully:||no": "ODS-arbeidsbok ble opprettet:",
  "ts||Open||no": "Åpne",
  "ts||Unable to open the ODS file automatically:||no": "Kan ikke åpne ODS-filen automatisk:",
  "ts||{e_open}||no": "{e_open}",
  "ts||Give a name to the item:||no": "Gi et navn til varen:",
  "ts||Name…||no": "Navn…",
  "ts||Text…||no": "Tekst…",
  "ts||Drawing||no": "Tegning",
  "ts||Add text||no": "Legg til tekst",
  "ts||Type the text to display:||no": "Skriv inn teksten som skal vises:",
  "ts||Add point||no": "Legg til punkt",
  "ts||Give a name to the point:||no": "Gi et navn til poenget:",
  "ts||Point…||no": "Punkt…",
  "ts||Add line||no": "Legg til linje",
  "ts||Give a name to the line:||no": "Gi linjen et navn:",
  "ts||Line…||no": "Linje…",
  "ts||Add polygon||no": "Legg til polygon",
  "ts||Give a name to the polygon:||no": "Gi et navn til polygonet:",
  "ts||Polygon…||no": "Polygon...",
  "ts||Buffer selection||no": "Buffervalg",
  "ts||Name this selection (buffer):||no": "Navngi dette utvalget (buffer):",
  "ts||Buffer…||no": "Buffer …",
  "ts||Add to an existing layer||no": "Legg til et eksisterende lag",
  "ts||Selecting...||no": "Velger...",
  "ts||Pass||no": "Pass",
  "ts||Drawings||no": "Tegninger",
  "ts||DMS Point drawing tool||no": "DMS Point tegneverktøy",
  "ts||Text drawing tool||no": "Teksttegneverktøy",
  "ts||Point drawing tool||no": "Punkttegneverktøy",
  "ts||Line drawing tool||no": "Linjetegningsverktøy",
  "ts||Rectangle drawing tool||no": "Rektangel tegneverktøy",
  "ts||Circle drawing tool||no": "Verktøy for tegning av sirkel",
  "ts||Polygon drawing tool||no": "Polygon tegneverktøy",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||no": "Buffertegning med polygonalt utvalg av objekter i det valgte laget",
  "ts||Buffer drawing on objects in selected layer||no": "Buffertegning på objekter i valgt lag",
  "ts||Install the Gestion_crise plugin||no": "Installer Crisis_management plugin",
  "ts||Help / User manual||no": "Hjelp / Brukerhåndbok",
  "ts||No selection||no": "Ingen valg",
  "ts||No selected items found in visible vector layers.||no": "Ingen valgte elementer funnet i synlige vektorlag.",
  "ts||XY point drawing tool||no": "XY punkt tegneverktøy",
  "ts||DMS point drawing tool||no": "DMS punkttegneverktøy",
  "ts||Saisie incorrecte ou clic sur Annuler||no": "Feil inntasting eller klikk på Avbryt",
  "ts||Invalid input !||no": "Ugyldig inndata!",
  "ts||Buffer drawing tool on the selected layer||no": "Buffertegneverktøy på det valgte laget",
  "ts||Polygon buffer drawing tool on the selected layer||no": "Tegneverktøy for polygonbuffer på det valgte laget",
  "ts||Left click to place a text.||no": "Venstreklikk for å plassere en tekst.",
  "ts||Left click to place a point.||no": "Venstreklikk for å plassere et punkt.",
  "ts||Left click to place points.||no": "Venstreklikk for å plassere poeng.",
  "ts||Right click to confirm.||no": "Høyreklikk for å bekrefte.",
  "ts||Maintain the left click to draw a rectangle.||no": "Hold venstreklikk for å tegne et rektangel.",
  "ts||Maintain the left click to draw a circle.||no": "Hold venstreklikk for å tegne en sirkel.",
  "ts||Simple left click to give a perimeter.||no": "Enkelt venstreklikk for å gi en omkrets.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||no": "Velg et vektorlag i lagtreet, og velg deretter en enhet på kartet.",
  "ts||Length: {value} m||no": "Lengde: {value} m",
  "ts||Area: {value} m²||no": "Areal: {value} m²",
  "ts||No object selected||no": "Ingen objekter er valgt",
  "ts||No object was found under the click.||no": "Ingen objekt ble funnet under klikket.",
  "ts||Please click directly on an object of the active layer.||no": "Klikk direkte på et objekt i det aktive laget.",
  "ts||Buffer creation||no": "Bufferoppretting",
  "ts||Do you want to create a buffer around the selected object?||no": "Vil du lage en buffer rundt det valgte objektet?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||no": "Velg om utvalget skal bruke selve objektet eller en buffer rundt det.",
  "ts||Create buffer||no": "Lag buffer",
  "ts||No buffer||no": "Ingen buffer",
  "ts||Buffer size||no": "Bufferstørrelse",
  "ts||Enter the buffer size in meters:||no": "Angi bufferstørrelsen i meter:",
  "ts||(works only with a metric coordinate reference system)||no": "(fungerer bare med et metrisk koordinatreferansesystem)",
  "ts||Circle name||no": "Sirkelnavn",
  "ts||Enter a name for the circle:||no": "Skriv inn et navn for kretsen:",
  "ts||Circle…||no": "Sirkel…",
  "ts||Rectangle name||no": "Rektangelnavn",
  "ts||Enter a name for the rectangle:||no": "Skriv inn et navn for rektangelet:",
  "ts||Rectangle…||no": "Rektangel…",
  "ts||Polygon name||no": "Polygon navn",
  "ts||Enter a name for the polygon:||no": "Skriv inn et navn for polygonet:",
  "ts||Buffer name||no": "Buffernavn",
  "ts||Enter a name for the buffer:||no": "Skriv inn et navn for bufferen:",
  "ts||Choosing a selection||no": "Velge et utvalg",
  "ts||{name} drawn.||no": "{name} trukket.",
  "ts||Make a selection within its extent?||no": "Foreta et utvalg innenfor omfanget?",
  "ts||No group found||no": "Ingen gruppe funnet",
  "ts||Aucun groupe n’existe dans le projet.||no": "Det finnes ingen grupper i prosjektet.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||no": "Opprett en gruppe og velg lagene som skal legges i den:",
  "ts||New group name||no": "Nytt gruppenavn",
  "ts||Available layers||no": "Tilgjengelige lag",
  "ts||You must name the group.||no": "Du må navngi gruppen.",
  "ts||Group created||no": "Gruppe opprettet",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||no": "Gruppen {new_group_name} er opprettet og de valgte lagene er flyttet.",
  "ts||Perimeter||no": "Omkrets",
  "ts||Give a perimeter in m:||no": "Gi en omkrets i m:",
  "ts||(works only with metric crs)||no": "(fungerer bare med metriske crs)",
  "ts||End of selection||no": "Slutt på valg",
  "ts||The {sel_group} group has been unchecked.||no": "Gruppen {sel_group} har blitt fjernet.",
  "ts||Warning||no": "Advarsel",
  "ts||You didn't click on a layer's attribute !||no": "Du klikket ikke på et lags attributt!",
  "ts||You must give a non-null value for a point's or line's perimeter!||no": "Du må gi en ikke-nullverdi for et punkts eller linjes omkrets!",
  "ts||There is no selected layer, or it is not vector nor visible!||no": "Det er ikke noe valgt lag, eller det er ikke vektor eller synlig!",
  "ts||No groups||no": "Ingen grupper",
  "ts||All groups are already checked.||no": "Alle grupper er allerede sjekket.",
  "ts||Choose a group for selection||no": "Velg en gruppe for valg",
  "ts||Choose a group from the list:||no": "Velg en gruppe fra listen:",
  "ts||WARNING!||no": "ADVARSEL!",
  "ts||Command not available:||no": "Kommando ikke tilgjengelig:",
  "ts||empty project.||no": "tomt prosjekt.",
  "ts||Start again||no": "Start på nytt",
  "ts||No layer or group is selected.||no": "Ingen lag eller gruppe er valgt.",
  "ts||Start again.||no": "Start på nytt.",
  "ts||Selection not possible.||no": "Valg ikke mulig.",
  "ts||The checked layer is not a polygon.||no": "Det sjekkede laget er ikke et polygon.",
  "ts||No layer is selected in the Layer Manager.||no": "Ingen lag er valgt i Layer Manager.",
  "ts||QdrawEVT Help - Gestion_crise||no": "QdrawEVT Help - Crisis_management",
  "ts||No help file was found in the 'help' folder.||no": "Ingen hjelpefil ble funnet i 'hjelp'-mappen.",
  "ts||Unable to read the help file: {error}||no": "Kan ikke lese hjelpefilen: {error}",
  "ts||Close||no": "Lukke",
  "ts||QdrawEVT - Settings||no": "QdrawEVT - Innstillinger",
  "ts||Change the drawing color||no": "Endre tegnefargen",
  "ts||Change text font||no": "Endre tekstskrift",
  "ts||Change text color||no": "Endre tekstfarge",
  "ts||Create the group and the event layers||no": "Lag gruppen og hendelseslagene",
  "ts||Enjeux||no": "Utfordringer",
  "ts||Aléas/risques||no": "Farer/risikoer",
  "ts||RDI||no": "RDI",
  "ts||Administratif||no": "Administrativt",
  "ts||Fonds de plan||no": "Planlegg midler",
  "ts||Creation of event shapefile||no": "Oppretting av hendelsesformfil",
  "ts||Possible only in a saved project.||no": "Kun mulig i et lagret prosjekt.",
  "ts||Error when creating shapefile||no": "Feil ved opprettelse av shapefile",
  "ts||QdrawEVT||no": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||no": "Tegn og velg enkelt enheter innenfor tegnefotavtrykket",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||no": "QdrawEVT lar deg tegne punkter, linjer og polygoner direkte på kartet og utføre valg av kryssende lag.",
  "ts||A dedicated help is available from the plugin menu.||no": "En dedikert hjelp er tilgjengelig fra plugin-menyen.",
  "ts||drawing, selection, events, vector, tools||no": "tegning, utvalg, hendelser, vektor, verktøy",
  "ts||François Thévand||no": "François Thévand",
  "ts||francois.thevand@gmail.com||no": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||no": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||no": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||da": "Rektangel størrelse",
  "ts||Give a size in m:||da": "Angiv en størrelse i m:",
  "ts||Width:||da": "Bredde:",
  "ts||Height:||da": "Højde:",
  "ts||Radius||da": "Radius",
  "ts||Give a radius in m:||da": "Giv en radius i m:",
  "ts||DMS Point Tool||da": "DMS punktværktøj",
  "ts||Latitude||da": "Breddegrad",
  "ts||Longitude||da": "Længde",
  "ts||Degrees||da": "Grader",
  "ts||Minutes||da": "Referater",
  "ts||Seconds||da": "Sekunder",
  "ts||Direction||da": "Retning",
  "ts||XY Point drawing tool||da": "XY Point tegneværktøj",
  "ts||Selection made in %1 perimeter||da": "Valg foretaget i %1 omkreds",
  "ts||Save this tab's results||da": "Gem resultaterne af denne fane",
  "ts||Save all results||da": "Gem alle resultater",
  "ts||Export the selection as a memory layer||da": "Eksporter markeringen som et hukommelseslag",
  "ts||Export all tabs as a memory layer||da": "Eksporter alle faner som et hukommelseslag",
  "ts||Zoom to selected attributes||da": "Zoom til udvalgte attributter",
  "ts||Highlight feature's geometry||da": "Fremhæv funktionens geometri",
  "ts||Settings||da": "Indstillinger",
  "ts||Loading...||da": "Indlæser...",
  "ts||Rename window||da": "Omdøb vinduet",
  "ts||Enter a new title:||da": "Indtast en ny titel:",
  "ts||Highlight feature's centroid||da": "Fremhæv funktionens tyngdepunkt",
  "ts||Extracts in {name}||da": "Uddrag i {name}",
  "ts||Session||da": "Session",
  "ts||Extract {title}||da": "Udpak {title}",
  "ts||Tab {index}||da": "Fane {index}",
  "ts||Extract {}||da": "Udpak {}",
  "ts||Extracts in {}||da": "Uddrag i {}",
  "ts||No items were selected||da": "Ingen elementer blev valgt",
  "ts||Selected items: {nb} Area: {area} m²||da": "Udvalgte varer: {nb} Areal: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||da": "Valgte varer: {nb} - Længde: {lenght}m",
  "ts||Selected items: {nb}||da": "Valgte elementer: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||da": "[highlight_features] Opdatering af statuslinjen mislykkedes: {e_sb}",
  "ts||Apply||da": "Anvende",
  "ts||Cancel||da": "Ophæve",
  "ts||Sheet||da": "Ark",
  "ts||Error||da": "Fejl",
  "ts||Cannot create export folder.||da": "Kan ikke oprette eksportmappe.",
  "ts||Selection made in||da": "Udvalg foretaget i",
  "ts||Information||da": "Information",
  "ts||No active tab found.||da": "Der blev ikke fundet nogen aktiv fane.",
  "ts||No data to save.||da": "Ingen data at gemme.",
  "ts||Save in...||da": "Gem i...",
  "ts||OpenDocument Spreadsheet (*.ods)||da": "OpenDocument-regneark (*.ods)",
  "ts||Unable to replace the existing file.||da": "Kan ikke erstatte den eksisterende fil.",
  "ts||Please close it if it is open in another application, then try again.||da": "Luk den, hvis den er åben i et andet program, og prøv derefter igen.",
  "ts||{path}||da": "{path}",
  "ts||Unable to write file:||da": "Kan ikke skrive fil:",
  "ts||{e_rep}||da": "{e_rep}",
  "ts||Open file?||da": "Åbn fil?",
  "ts||ODS workbook created successfully:||da": "ODS-projektmappe oprettet med succes:",
  "ts||Open||da": "Åben",
  "ts||Unable to open the ODS file automatically:||da": "Kan ikke åbne ODS-filen automatisk:",
  "ts||{e_open}||da": "{e_open}",
  "ts||Give a name to the item:||da": "Giv et navn til varen:",
  "ts||Name…||da": "Navn…",
  "ts||Text…||da": "Tekst…",
  "ts||Drawing||da": "Tegning",
  "ts||Add text||da": "Tilføj tekst",
  "ts||Type the text to display:||da": "Indtast den tekst, der skal vises:",
  "ts||Add point||da": "Tilføj punkt",
  "ts||Give a name to the point:||da": "Giv et navn til punktet:",
  "ts||Point…||da": "Punkt…",
  "ts||Add line||da": "Tilføj linje",
  "ts||Give a name to the line:||da": "Giv et navn til linjen:",
  "ts||Line…||da": "Linje...",
  "ts||Add polygon||da": "Tilføj polygon",
  "ts||Give a name to the polygon:||da": "Giv et navn til polygonen:",
  "ts||Polygon…||da": "Polygon...",
  "ts||Buffer selection||da": "Buffervalg",
  "ts||Name this selection (buffer):||da": "Navngiv dette valg (buffer):",
  "ts||Buffer…||da": "Buffer…",
  "ts||Add to an existing layer||da": "Tilføj til et eksisterende lag",
  "ts||Selecting...||da": "Vælger...",
  "ts||Pass||da": "Passere",
  "ts||Drawings||da": "Tegninger",
  "ts||DMS Point drawing tool||da": "DMS Point tegneværktøj",
  "ts||Text drawing tool||da": "Teksttegneværktøj",
  "ts||Point drawing tool||da": "Punkttegneværktøj",
  "ts||Line drawing tool||da": "Stregtegningsværktøj",
  "ts||Rectangle drawing tool||da": "Rektangel tegneværktøj",
  "ts||Circle drawing tool||da": "Cirkel tegneværktøj",
  "ts||Polygon drawing tool||da": "Polygon tegneværktøj",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||da": "Buffertegning med polygonal markering af objekter i det valgte lag",
  "ts||Buffer drawing on objects in selected layer||da": "Buffertegning på objekter i det valgte lag",
  "ts||Install the Gestion_crise plugin||da": "Installer Crisis_management plugin",
  "ts||Help / User manual||da": "Hjælp / Brugermanual",
  "ts||No selection||da": "Intet valg",
  "ts||No selected items found in visible vector layers.||da": "Ingen valgte elementer fundet i synlige vektorlag.",
  "ts||XY point drawing tool||da": "XY punkt tegneværktøj",
  "ts||DMS point drawing tool||da": "DMS punkttegneværktøj",
  "ts||Saisie incorrecte ou clic sur Annuler||da": "Forkert indtastning eller klik på Annuller",
  "ts||Invalid input !||da": "Ugyldigt input!",
  "ts||Buffer drawing tool on the selected layer||da": "Buffertegneværktøj på det valgte lag",
  "ts||Polygon buffer drawing tool on the selected layer||da": "Polygonbuffer tegneværktøj på det valgte lag",
  "ts||Left click to place a text.||da": "Venstre klik for at placere en tekst.",
  "ts||Left click to place a point.||da": "Venstre klik for at placere et punkt.",
  "ts||Left click to place points.||da": "Venstre klik for at placere point.",
  "ts||Right click to confirm.||da": "Højreklik for at bekræfte.",
  "ts||Maintain the left click to draw a rectangle.||da": "Hold venstre klik for at tegne et rektangel.",
  "ts||Maintain the left click to draw a circle.||da": "Hold venstre klik for at tegne en cirkel.",
  "ts||Simple left click to give a perimeter.||da": "Simpelt venstreklik for at give en omkreds.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||da": "Vælg et vektorlag i lagtræet, og vælg derefter en enhed på kortet.",
  "ts||Length: {value} m||da": "Længde: {value} m",
  "ts||Area: {value} m²||da": "Areal: {value} m²",
  "ts||No object selected||da": "Intet objekt valgt",
  "ts||No object was found under the click.||da": "Der blev ikke fundet noget objekt under klikket.",
  "ts||Please click directly on an object of the active layer.||da": "Klik venligst direkte på et objekt i det aktive lag.",
  "ts||Buffer creation||da": "Buffer skabelse",
  "ts||Do you want to create a buffer around the selected object?||da": "Vil du oprette en buffer omkring det valgte objekt?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||da": "Vælg om markeringen skal bruge selve objektet eller en buffer omkring det.",
  "ts||Create buffer||da": "Opret buffer",
  "ts||No buffer||da": "Ingen buffer",
  "ts||Buffer size||da": "Buffer størrelse",
  "ts||Enter the buffer size in meters:||da": "Indtast bufferstørrelsen i meter:",
  "ts||(works only with a metric coordinate reference system)||da": "(fungerer kun med et metrisk koordinatreferencesystem)",
  "ts||Circle name||da": "Cirkelnavn",
  "ts||Enter a name for the circle:||da": "Indtast et navn til cirklen:",
  "ts||Circle…||da": "Cirkel…",
  "ts||Rectangle name||da": "Rektangel navn",
  "ts||Enter a name for the rectangle:||da": "Indtast et navn til rektanglet:",
  "ts||Rectangle…||da": "Rektangel…",
  "ts||Polygon name||da": "Polygon navn",
  "ts||Enter a name for the polygon:||da": "Indtast et navn til polygonen:",
  "ts||Buffer name||da": "Buffer navn",
  "ts||Enter a name for the buffer:||da": "Indtast et navn til bufferen:",
  "ts||Choosing a selection||da": "Valg af et udvalg",
  "ts||{name} drawn.||da": "{name} tegnet.",
  "ts||Make a selection within its extent?||da": "Foretage et valg inden for dets omfang?",
  "ts||No group found||da": "Ingen gruppe fundet",
  "ts||Aucun groupe n’existe dans le projet.||da": "Der er ingen grupper i projektet.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||da": "Opret en gruppe, og vælg de lag, der skal indsættes i den:",
  "ts||New group name||da": "Nyt gruppenavn",
  "ts||Available layers||da": "Tilgængelige lag",
  "ts||You must name the group.||da": "Du skal navngive gruppen.",
  "ts||Group created||da": "Gruppe oprettet",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||da": "Gruppen {new_group_name} er blevet oprettet, og de valgte lag er blevet flyttet.",
  "ts||Perimeter||da": "Perimeter",
  "ts||Give a perimeter in m:||da": "Angiv en omkreds i m:",
  "ts||(works only with metric crs)||da": "(fungerer kun med metriske crs)",
  "ts||End of selection||da": "Slut på valg",
  "ts||The {sel_group} group has been unchecked.||da": "Gruppen {sel_group} er blevet fjernet fra markeringen.",
  "ts||Warning||da": "Advarsel",
  "ts||You didn't click on a layer's attribute !||da": "Du klikkede ikke på et lags attribut!",
  "ts||You must give a non-null value for a point's or line's perimeter!||da": "Du skal angive en ikke-nul værdi for et punkts eller linjes omkreds!",
  "ts||There is no selected layer, or it is not vector nor visible!||da": "Der er ikke noget valgt lag, eller det er ikke vektor eller synligt!",
  "ts||No groups||da": "Ingen grupper",
  "ts||All groups are already checked.||da": "Alle grupper er allerede markeret.",
  "ts||Choose a group for selection||da": "Vælg en gruppe til valg",
  "ts||Choose a group from the list:||da": "Vælg en gruppe fra listen:",
  "ts||WARNING!||da": "ADVARSEL!",
  "ts||Command not available:||da": "Kommando ikke tilgængelig:",
  "ts||empty project.||da": "tomt projekt.",
  "ts||Start again||da": "Start igen",
  "ts||No layer or group is selected.||da": "Intet lag eller gruppe er valgt.",
  "ts||Start again.||da": "Start igen.",
  "ts||Selection not possible.||da": "Valg ikke muligt.",
  "ts||The checked layer is not a polygon.||da": "Det afkrydsede lag er ikke en polygon.",
  "ts||No layer is selected in the Layer Manager.||da": "Intet lag er valgt i Layer Manager.",
  "ts||QdrawEVT Help - Gestion_crise||da": "QdrawEVT Hjælp - Crisis_management",
  "ts||No help file was found in the 'help' folder.||da": "Der blev ikke fundet nogen hjælpefil i 'hjælp'-mappen.",
  "ts||Unable to read the help file: {error}||da": "Kan ikke læse hjælpefilen: {error}",
  "ts||Close||da": "Tæt",
  "ts||QdrawEVT - Settings||da": "QdrawEVT - Indstillinger",
  "ts||Change the drawing color||da": "Skift farven på tegningen",
  "ts||Change text font||da": "Skift skrifttype",
  "ts||Change text color||da": "Skift tekstfarve",
  "ts||Create the group and the event layers||da": "Opret gruppen og begivenhedslagene",
  "ts||Enjeux||da": "Udfordringer",
  "ts||Aléas/risques||da": "Farer/risici",
  "ts||RDI||da": "RDI",
  "ts||Administratif||da": "Administrativ",
  "ts||Fonds de plan||da": "Planlæg midler",
  "ts||Creation of event shapefile||da": "Oprettelse af event-shapefil",
  "ts||Possible only in a saved project.||da": "Kun muligt i et gemt projekt.",
  "ts||Error when creating shapefile||da": "Fejl ved oprettelse af shapefile",
  "ts||QdrawEVT||da": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||da": "Tegn og vælg nemt enheder inden for tegningens fodaftryk",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||da": "QdrawEVT giver dig mulighed for at tegne punkter, linjer og polygoner direkte på kortet og udføre valg af krydsende lag.",
  "ts||A dedicated help is available from the plugin menu.||da": "En dedikeret hjælp er tilgængelig fra plugin-menuen.",
  "ts||drawing, selection, events, vector, tools||da": "tegning, udvælgelse, begivenheder, vektor, værktøjer",
  "ts||François Thévand||da": "François Thévand",
  "ts||francois.thevand@gmail.com||da": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||da": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||da": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||fi": "Suorakulmion koko",
  "ts||Give a size in m:||fi": "Anna koko metreinä:",
  "ts||Width:||fi": "Leveys:",
  "ts||Height:||fi": "Korkeus:",
  "ts||Radius||fi": "Säde",
  "ts||Give a radius in m:||fi": "Anna säde m:",
  "ts||DMS Point Tool||fi": "DMS-pistetyökalu",
  "ts||Latitude||fi": "Leveysaste",
  "ts||Longitude||fi": "Pituusaste",
  "ts||Degrees||fi": "Astetta",
  "ts||Minutes||fi": "Minuutit",
  "ts||Seconds||fi": "Sekuntia",
  "ts||Direction||fi": "Suunta",
  "ts||XY Point drawing tool||fi": "XY-pisteen piirustustyökalu",
  "ts||Selection made in %1 perimeter||fi": "Valinta tehtiin alueella %1",
  "ts||Save this tab's results||fi": "Tallenna tämän välilehden tulokset",
  "ts||Save all results||fi": "Tallenna kaikki tulokset",
  "ts||Export the selection as a memory layer||fi": "Vie valinta muistikerroksena",
  "ts||Export all tabs as a memory layer||fi": "Vie kaikki välilehdet muistikerroksena",
  "ts||Zoom to selected attributes||fi": "Zoomaa valittuihin määritteisiin",
  "ts||Highlight feature's geometry||fi": "Korosta ominaisuuden geometria",
  "ts||Settings||fi": "Asetukset",
  "ts||Loading...||fi": "Ladataan...",
  "ts||Rename window||fi": "Nimeä ikkuna uudelleen",
  "ts||Enter a new title:||fi": "Kirjoita uusi otsikko:",
  "ts||Highlight feature's centroid||fi": "Korosta ominaisuuden sentroidi",
  "ts||Extracts in {name}||fi": "Otteet kohteessa {name}",
  "ts||Session||fi": "Istunto",
  "ts||Extract {title}||fi": "Pura {title}",
  "ts||Tab {index}||fi": "Välilehti {index}",
  "ts||Extract {}||fi": "Pura {}",
  "ts||Extracts in {}||fi": "Otteet kohteessa {}",
  "ts||No items were selected||fi": "Kohteita ei valittu",
  "ts||Selected items: {nb} Area: {area} m²||fi": "Valitut kohteet: {nb} Pinta-ala: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||fi": "Valitut kohteet: {nb} - Pituus: {lenght}m",
  "ts||Selected items: {nb}||fi": "Valitut kohteet: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||fi": "[highlight_features] Tilapalkin päivitys epäonnistui: {e_sb}",
  "ts||Apply||fi": "Käytä",
  "ts||Cancel||fi": "Peruuttaa",
  "ts||Sheet||fi": "Arkki",
  "ts||Error||fi": "Virhe",
  "ts||Cannot create export folder.||fi": "Vientikansiota ei voi luoda.",
  "ts||Selection made in||fi": "Valinta tehty vuonna",
  "ts||Information||fi": "Tiedot",
  "ts||No active tab found.||fi": "Aktiivista välilehteä ei löytynyt.",
  "ts||No data to save.||fi": "Ei tallennettavia tietoja.",
  "ts||Save in...||fi": "Tallenna sisään...",
  "ts||OpenDocument Spreadsheet (*.ods)||fi": "OpenDocument-laskentataulukko (*.ods)",
  "ts||Unable to replace the existing file.||fi": "Olemassa olevaa tiedostoa ei voi korvata.",
  "ts||Please close it if it is open in another application, then try again.||fi": "Sulje se, jos se on auki toisessa sovelluksessa, ja yritä sitten uudelleen.",
  "ts||{path}||fi": "{path}",
  "ts||Unable to write file:||fi": "Tiedostoa ei voi kirjoittaa:",
  "ts||{e_rep}||fi": "{e_rep}",
  "ts||Open file?||fi": "Avaa tiedosto?",
  "ts||ODS workbook created successfully:||fi": "ODS-työkirjan luominen onnistui:",
  "ts||Open||fi": "Avata",
  "ts||Unable to open the ODS file automatically:||fi": "ODS-tiedostoa ei voi avata automaattisesti:",
  "ts||{e_open}||fi": "{e_open}",
  "ts||Give a name to the item:||fi": "Anna nimikkeelle nimi:",
  "ts||Name…||fi": "Nimi…",
  "ts||Text…||fi": "Teksti…",
  "ts||Drawing||fi": "Piirustus",
  "ts||Add text||fi": "Lisää tekstiä",
  "ts||Type the text to display:||fi": "Kirjoita näytettävä teksti:",
  "ts||Add point||fi": "Lisää piste",
  "ts||Give a name to the point:||fi": "Anna pisteelle nimi:",
  "ts||Point…||fi": "Kohta…",
  "ts||Add line||fi": "Lisää rivi",
  "ts||Give a name to the line:||fi": "Anna riville nimi:",
  "ts||Line…||fi": "Linja…",
  "ts||Add polygon||fi": "Lisää monikulmio",
  "ts||Give a name to the polygon:||fi": "Anna polygonille nimi:",
  "ts||Polygon…||fi": "Monikulmio…",
  "ts||Buffer selection||fi": "Puskurin valinta",
  "ts||Name this selection (buffer):||fi": "Nimeä tämä valinta (puskuri):",
  "ts||Buffer…||fi": "Puskuri…",
  "ts||Add to an existing layer||fi": "Lisää olemassa olevaan tasoon",
  "ts||Selecting...||fi": "Valitaan...",
  "ts||Pass||fi": "Syöttö",
  "ts||Drawings||fi": "Piirustukset",
  "ts||DMS Point drawing tool||fi": "DMS-pistepiirustustyökalu",
  "ts||Text drawing tool||fi": "Tekstin piirustustyökalu",
  "ts||Point drawing tool||fi": "Pistepiirustustyökalu",
  "ts||Line drawing tool||fi": "Viivan piirustustyökalu",
  "ts||Rectangle drawing tool||fi": "Suorakulmion piirustustyökalu",
  "ts||Circle drawing tool||fi": "Ympyrän piirustustyökalu",
  "ts||Polygon drawing tool||fi": "Monikulmion piirustustyökalu",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||fi": "Puskuroi piirustus monikulmioiden valinnalla valitussa kerroksessa",
  "ts||Buffer drawing on objects in selected layer||fi": "Puskuroi piirustus valitun tason objekteihin",
  "ts||Install the Gestion_crise plugin||fi": "Asenna Crisis_management-laajennus",
  "ts||Help / User manual||fi": "Ohje / Käyttöopas",
  "ts||No selection||fi": "Ei valintaa",
  "ts||No selected items found in visible vector layers.||fi": "Näkyvistä vektoritasoista ei löytynyt valittuja kohteita.",
  "ts||XY point drawing tool||fi": "XY-pisteen piirustustyökalu",
  "ts||DMS point drawing tool||fi": "DMS-pistepiirustustyökalu",
  "ts||Saisie incorrecte ou clic sur Annuler||fi": "Väärä syöttö tai napsauta Peruuta",
  "ts||Invalid input !||fi": "Virheellinen syöte!",
  "ts||Buffer drawing tool on the selected layer||fi": "Puskurin piirustustyökalu valitulle tasolle",
  "ts||Polygon buffer drawing tool on the selected layer||fi": "Monikulmiopuskurin piirtotyökalu valitulle tasolle",
  "ts||Left click to place a text.||fi": "Aseta teksti napsauttamalla hiiren kakkospainikkeella.",
  "ts||Left click to place a point.||fi": "Aseta piste napsauttamalla hiiren kakkospainikkeella.",
  "ts||Left click to place points.||fi": "Sijoita pisteitä hiiren vasemmalla painikkeella.",
  "ts||Right click to confirm.||fi": "Napsauta hiiren kakkospainikkeella vahvistaaksesi.",
  "ts||Maintain the left click to draw a rectangle.||fi": "Napsauta hiiren vasemmalla painikkeella suorakulmion piirtämiseksi.",
  "ts||Maintain the left click to draw a circle.||fi": "Paina vasenta painiketta piirtääksesi ympyrän.",
  "ts||Simple left click to give a perimeter.||fi": "Yksinkertainen vasen napsautus antaa kehän.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||fi": "Valitse vektoritaso Tasopuusta ja valitse sitten entiteetti kartalta.",
  "ts||Length: {value} m||fi": "Pituus: {value} m",
  "ts||Area: {value} m²||fi": "Pinta-ala: {value} m²",
  "ts||No object selected||fi": "Objektia ei ole valittu",
  "ts||No object was found under the click.||fi": "Napsautuksen alta ei löytynyt esinettä.",
  "ts||Please click directly on an object of the active layer.||fi": "Napsauta suoraan aktiivisen tason objektia.",
  "ts||Buffer creation||fi": "Puskurin luominen",
  "ts||Do you want to create a buffer around the selected object?||fi": "Haluatko luoda puskurin valitun objektin ympärille?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||fi": "Valitse, käytetäänkö valinnassa itse objektia vai sen ympärillä olevaa puskuria.",
  "ts||Create buffer||fi": "Luo puskuri",
  "ts||No buffer||fi": "Ei puskuria",
  "ts||Buffer size||fi": "Puskurin koko",
  "ts||Enter the buffer size in meters:||fi": "Syötä puskurin koko metreinä:",
  "ts||(works only with a metric coordinate reference system)||fi": "(toimii vain metrisen koordinaattiviittausjärjestelmän kanssa)",
  "ts||Circle name||fi": "Piirin nimi",
  "ts||Enter a name for the circle:||fi": "Anna piirille nimi:",
  "ts||Circle…||fi": "Ympyrä…",
  "ts||Rectangle name||fi": "Suorakulmion nimi",
  "ts||Enter a name for the rectangle:||fi": "Anna suorakulmiolle nimi:",
  "ts||Rectangle…||fi": "Suorakulmio…",
  "ts||Polygon name||fi": "Monikulmion nimi",
  "ts||Enter a name for the polygon:||fi": "Anna polygonille nimi:",
  "ts||Buffer name||fi": "Puskurin nimi",
  "ts||Enter a name for the buffer:||fi": "Anna puskurille nimi:",
  "ts||Choosing a selection||fi": "Valikoiman valinta",
  "ts||{name} drawn.||fi": "{name} piirretty.",
  "ts||Make a selection within its extent?||fi": "Tee valinta sen laajuudessa?",
  "ts||No group found||fi": "Ryhmää ei löydy",
  "ts||Aucun groupe n’existe dans le projet.||fi": "Projektissa ei ole ryhmiä.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||fi": "Luo ryhmä ja valitse siihen lisättävät tasot:",
  "ts||New group name||fi": "Ryhmän uusi nimi",
  "ts||Available layers||fi": "Käytettävissä olevat kerrokset",
  "ts||You must name the group.||fi": "Sinun on nimettävä ryhmä.",
  "ts||Group created||fi": "Ryhmä luotu",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||fi": "Ryhmä {new_group_name} on luotu ja valitut tasot on siirretty.",
  "ts||Perimeter||fi": "Kehä",
  "ts||Give a perimeter in m:||fi": "Anna ympärysmitta metreinä:",
  "ts||(works only with metric crs)||fi": "(toimii vain metrisen crs:n kanssa)",
  "ts||End of selection||fi": "Valinnan loppu",
  "ts||The {sel_group} group has been unchecked.||fi": "Ryhmää {sel_group} ei ole valittu.",
  "ts||Warning||fi": "Varoitus",
  "ts||You didn't click on a layer's attribute !||fi": "Et napsauttanut tason attribuuttia!",
  "ts||You must give a non-null value for a point's or line's perimeter!||fi": "Sinun on annettava ei-nolla-arvo pisteen tai suoran kehälle!",
  "ts||There is no selected layer, or it is not vector nor visible!||fi": "Tasoa ei ole valittu tai se ei ole vektori eikä näy!",
  "ts||No groups||fi": "Ei ryhmiä",
  "ts||All groups are already checked.||fi": "Kaikki ryhmät on jo tarkastettu.",
  "ts||Choose a group for selection||fi": "Valitse ryhmä valittavaksi",
  "ts||Choose a group from the list:||fi": "Valitse ryhmä luettelosta:",
  "ts||WARNING!||fi": "VAROITUS!",
  "ts||Command not available:||fi": "Komento ei ole käytettävissä:",
  "ts||empty project.||fi": "tyhjä projekti.",
  "ts||Start again||fi": "Aloita uudelleen",
  "ts||No layer or group is selected.||fi": "Tasoa tai ryhmää ei ole valittu.",
  "ts||Start again.||fi": "Aloita uudelleen.",
  "ts||Selection not possible.||fi": "Valinta ei ole mahdollista.",
  "ts||The checked layer is not a polygon.||fi": "Valittu taso ei ole monikulmio.",
  "ts||No layer is selected in the Layer Manager.||fi": "Tasojen hallinnassa ei ole valittu yhtään tasoa.",
  "ts||QdrawEVT Help - Gestion_crise||fi": "QdrawEVT-ohje - Crisis_management",
  "ts||No help file was found in the 'help' folder.||fi": "Ohje-kansiosta ei löytynyt ohjetiedostoa.",
  "ts||Unable to read the help file: {error}||fi": "Ohjetiedostoa ei voi lukea: {error}",
  "ts||Close||fi": "Lähellä",
  "ts||QdrawEVT - Settings||fi": "QdrawEVT - Asetukset",
  "ts||Change the drawing color||fi": "Muuta piirustuksen väriä",
  "ts||Change text font||fi": "Muuta tekstin fonttia",
  "ts||Change text color||fi": "Muuta tekstin väriä",
  "ts||Create the group and the event layers||fi": "Luo ryhmä ja tapahtumatasot",
  "ts||Enjeux||fi": "Haasteet",
  "ts||Aléas/risques||fi": "Vaarat/riskit",
  "ts||RDI||fi": "RDI",
  "ts||Administratif||fi": "Hallinnollinen",
  "ts||Fonds de plan||fi": "Suunnittele varoja",
  "ts||Creation of event shapefile||fi": "Tapahtuman muototiedoston luominen",
  "ts||Possible only in a saved project.||fi": "Mahdollista vain tallennetussa projektissa.",
  "ts||Error when creating shapefile||fi": "Virhe luotaessa shape-tiedostoa",
  "ts||QdrawEVT||fi": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||fi": "Piirrä ja valitse entiteetit helposti piirustuksen jalanjäljen sisällä",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||fi": "QdrawEVT:n avulla voit piirtää pisteitä, viivoja ja polygoneja suoraan kartalle ja valita risteäviä tasoja.",
  "ts||A dedicated help is available from the plugin menu.||fi": "Erillinen ohje on saatavilla laajennusvalikosta.",
  "ts||drawing, selection, events, vector, tools||fi": "piirustus, valinta, tapahtumat, vektori, työkalut",
  "ts||François Thévand||fi": "François Thévand",
  "ts||francois.thevand@gmail.com||fi": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||fi": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||fi": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||pl": "Rozmiar prostokąta",
  "ts||Give a size in m:||pl": "Podaj rozmiar w m:",
  "ts||Width:||pl": "Szerokość:",
  "ts||Height:||pl": "Wysokość:",
  "ts||Radius||pl": "Promień",
  "ts||Give a radius in m:||pl": "Podaj promień w m:",
  "ts||DMS Point Tool||pl": "Narzędzie punktowe DMS",
  "ts||Latitude||pl": "Szerokość",
  "ts||Longitude||pl": "Długość geograficzna",
  "ts||Degrees||pl": "Stopnie",
  "ts||Minutes||pl": "Protokół",
  "ts||Seconds||pl": "Towary drugiej jakości",
  "ts||Direction||pl": "Kierunek",
  "ts||XY Point drawing tool||pl": "Narzędzie do rysowania punktów XY",
  "ts||Selection made in %1 perimeter||pl": "Wybór dokonany w obwodzie %1",
  "ts||Save this tab's results||pl": "Zapisz wyniki tej karty",
  "ts||Save all results||pl": "Zapisz wszystkie wyniki",
  "ts||Export the selection as a memory layer||pl": "Eksportuj zaznaczenie jako warstwę pamięci",
  "ts||Export all tabs as a memory layer||pl": "Eksportuj wszystkie karty jako warstwę pamięci",
  "ts||Zoom to selected attributes||pl": "Powiększ wybrane atrybuty",
  "ts||Highlight feature's geometry||pl": "Podświetl geometrię elementu",
  "ts||Settings||pl": "Ustawienia",
  "ts||Loading...||pl": "Załadunek...",
  "ts||Rename window||pl": "Zmień nazwę okna",
  "ts||Enter a new title:||pl": "Wpisz nowy tytuł:",
  "ts||Highlight feature's centroid||pl": "Podświetl środek ciężkości elementu",
  "ts||Extracts in {name}||pl": "Wyciągi w {name}",
  "ts||Session||pl": "Sesja",
  "ts||Extract {title}||pl": "Wyodrębnij {title}",
  "ts||Tab {index}||pl": "Zakładka {index}",
  "ts||Extract {}||pl": "Wyodrębnij {}",
  "ts||Extracts in {}||pl": "Wyciągi w {}",
  "ts||No items were selected||pl": "Nie wybrano żadnych elementów",
  "ts||Selected items: {nb} Area: {area} m²||pl": "Wybrane pozycje: {nb} Powierzchnia: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||pl": "Wybrane pozycje: {nb} - Długość: {lenght}m",
  "ts||Selected items: {nb}||pl": "Wybrane pozycje: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||pl": "[highlight_features] Aktualizacja paska stanu nie powiodła się: {e_sb}",
  "ts||Apply||pl": "Stosować",
  "ts||Cancel||pl": "Anulować",
  "ts||Sheet||pl": "Arkusz",
  "ts||Error||pl": "Błąd",
  "ts||Cannot create export folder.||pl": "Nie można utworzyć folderu eksportu.",
  "ts||Selection made in||pl": "Wybór dokonany w",
  "ts||Information||pl": "Informacja",
  "ts||No active tab found.||pl": "Nie znaleziono aktywnej karty.",
  "ts||No data to save.||pl": "Brak danych do zapisania.",
  "ts||Save in...||pl": "Zapisz w...",
  "ts||OpenDocument Spreadsheet (*.ods)||pl": "Arkusz kalkulacyjny OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||pl": "Nie można zastąpić istniejącego pliku.",
  "ts||Please close it if it is open in another application, then try again.||pl": "Zamknij go, jeśli jest otwarty w innej aplikacji, a następnie spróbuj ponownie.",
  "ts||{path}||pl": "{path}",
  "ts||Unable to write file:||pl": "Nie można zapisać pliku:",
  "ts||{e_rep}||pl": "{e_rep}",
  "ts||Open file?||pl": "Otwórz plik?",
  "ts||ODS workbook created successfully:||pl": "Skoroszyt ODS został utworzony pomyślnie:",
  "ts||Open||pl": "Otwarte",
  "ts||Unable to open the ODS file automatically:||pl": "Nie można automatycznie otworzyć pliku ODS:",
  "ts||{e_open}||pl": "{e_open}",
  "ts||Give a name to the item:||pl": "Nadaj nazwę przedmiotowi:",
  "ts||Name…||pl": "Nazwa…",
  "ts||Text…||pl": "Tekst…",
  "ts||Drawing||pl": "Rysunek",
  "ts||Add text||pl": "Dodaj tekst",
  "ts||Type the text to display:||pl": "Wpisz tekst, który ma zostać wyświetlony:",
  "ts||Add point||pl": "Dodaj punkt",
  "ts||Give a name to the point:||pl": "Nadaj nazwę temu punktowi:",
  "ts||Point…||pl": "Punkt…",
  "ts||Add line||pl": "Dodaj linię",
  "ts||Give a name to the line:||pl": "Nadaj nazwę linii:",
  "ts||Line…||pl": "Linia…",
  "ts||Add polygon||pl": "Dodaj wielokąt",
  "ts||Give a name to the polygon:||pl": "Nadaj nazwę wielokątowi:",
  "ts||Polygon…||pl": "Wielokąt…",
  "ts||Buffer selection||pl": "Wybór bufora",
  "ts||Name this selection (buffer):||pl": "Nazwij ten wybór (bufor):",
  "ts||Buffer…||pl": "Bufor…",
  "ts||Add to an existing layer||pl": "Dodaj do istniejącej warstwy",
  "ts||Selecting...||pl": "Wybieranie...",
  "ts||Pass||pl": "Przechodzić",
  "ts||Drawings||pl": "Rysunki",
  "ts||DMS Point drawing tool||pl": "Narzędzie do rysowania punktów DMS",
  "ts||Text drawing tool||pl": "Narzędzie do rysowania tekstu",
  "ts||Point drawing tool||pl": "Narzędzie do rysowania punktów",
  "ts||Line drawing tool||pl": "Narzędzie do rysowania linii",
  "ts||Rectangle drawing tool||pl": "Narzędzie do rysowania prostokątów",
  "ts||Circle drawing tool||pl": "Narzędzie do rysowania okręgów",
  "ts||Polygon drawing tool||pl": "Narzędzie do rysowania wielokątów",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||pl": "Rysunek buforowy z wielokątnym zaznaczeniem obiektów w wybranej warstwie",
  "ts||Buffer drawing on objects in selected layer||pl": "Bufor rysowania na obiektach w wybranej warstwie",
  "ts||Install the Gestion_crise plugin||pl": "Zainstaluj wtyczkę Crisis_management",
  "ts||Help / User manual||pl": "Pomoc / Instrukcja obsługi",
  "ts||No selection||pl": "Brak wyboru",
  "ts||No selected items found in visible vector layers.||pl": "Nie znaleziono wybranych elementów w widocznych warstwach wektorowych.",
  "ts||XY point drawing tool||pl": "Narzędzie do rysowania punktów XY",
  "ts||DMS point drawing tool||pl": "Narzędzie do rysowania punktów DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||pl": "Błędny wpis lub kliknij Anuluj",
  "ts||Invalid input !||pl": "Nieprawidłowe dane wejściowe!",
  "ts||Buffer drawing tool on the selected layer||pl": "Narzędzie do rysowania buforów na wybranej warstwie",
  "ts||Polygon buffer drawing tool on the selected layer||pl": "Narzędzie do rysowania bufora wielokątów na wybranej warstwie",
  "ts||Left click to place a text.||pl": "Kliknij lewym przyciskiem myszy, aby umieścić tekst.",
  "ts||Left click to place a point.||pl": "Kliknij lewym przyciskiem myszy, aby umieścić punkt.",
  "ts||Left click to place points.||pl": "Kliknij lewym przyciskiem myszy, aby umieścić punkty.",
  "ts||Right click to confirm.||pl": "Kliknij prawym przyciskiem myszy, aby potwierdzić.",
  "ts||Maintain the left click to draw a rectangle.||pl": "Przytrzymaj lewy przycisk myszy, aby narysować prostokąt.",
  "ts||Maintain the left click to draw a circle.||pl": "Przytrzymaj lewy przycisk myszy, aby narysować okrąg.",
  "ts||Simple left click to give a perimeter.||pl": "Proste kliknięcie lewym przyciskiem myszy daje obwód.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||pl": "Wybierz warstwę wektorową w drzewie warstw, a następnie wybierz obiekt na mapie.",
  "ts||Length: {value} m||pl": "Długość: {value} m",
  "ts||Area: {value} m²||pl": "Powierzchnia: {value} m²",
  "ts||No object selected||pl": "Nie wybrano żadnego obiektu",
  "ts||No object was found under the click.||pl": "Pod kliknięciem nie znaleziono żadnego obiektu.",
  "ts||Please click directly on an object of the active layer.||pl": "Proszę kliknąć bezpośrednio na obiekt aktywnej warstwy.",
  "ts||Buffer creation||pl": "Tworzenie bufora",
  "ts||Do you want to create a buffer around the selected object?||pl": "Czy chcesz utworzyć bufor wokół wybranego obiektu?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||pl": "Wybierz, czy zaznaczenie ma wykorzystywać sam obiekt, czy otaczający go bufor.",
  "ts||Create buffer||pl": "Utwórz bufor",
  "ts||No buffer||pl": "Brak bufora",
  "ts||Buffer size||pl": "Rozmiar bufora",
  "ts||Enter the buffer size in meters:||pl": "Podaj wielkość bufora w metrach:",
  "ts||(works only with a metric coordinate reference system)||pl": "(działa tylko z metrycznym systemem odniesienia za pomocą współrzędnych)",
  "ts||Circle name||pl": "Nazwa kręgu",
  "ts||Enter a name for the circle:||pl": "Wpisz nazwę kręgu:",
  "ts||Circle…||pl": "Koło…",
  "ts||Rectangle name||pl": "Nazwa prostokąta",
  "ts||Enter a name for the rectangle:||pl": "Wpisz nazwę prostokąta:",
  "ts||Rectangle…||pl": "Prostokąt…",
  "ts||Polygon name||pl": "Nazwa wielokąta",
  "ts||Enter a name for the polygon:||pl": "Wprowadź nazwę wielokąta:",
  "ts||Buffer name||pl": "Nazwa bufora",
  "ts||Enter a name for the buffer:||pl": "Wprowadź nazwę bufora:",
  "ts||Choosing a selection||pl": "Wybór wyboru",
  "ts||{name} drawn.||pl": "{name} narysowane.",
  "ts||Make a selection within its extent?||pl": "Dokonać selekcji w jej zakresie?",
  "ts||No group found||pl": "Nie znaleziono żadnej grupy",
  "ts||Aucun groupe n’existe dans le projet.||pl": "W projekcie nie ma żadnych grup.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||pl": "Utwórz grupę i wybierz warstwy, które chcesz w niej umieścić:",
  "ts||New group name||pl": "Nowa nazwa grupy",
  "ts||Available layers||pl": "Dostępne warstwy",
  "ts||You must name the group.||pl": "Musisz nazwać grupę.",
  "ts||Group created||pl": "Grupa utworzona",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||pl": "Grupa {new_group_name} została utworzona i wybrane warstwy zostały przeniesione.",
  "ts||Perimeter||pl": "Obwód",
  "ts||Give a perimeter in m:||pl": "Podaj obwód w m:",
  "ts||(works only with metric crs)||pl": "(działa tylko z crs metrycznymi)",
  "ts||End of selection||pl": "Koniec selekcji",
  "ts||The {sel_group} group has been unchecked.||pl": "Grupa {sel_group} została odznaczona.",
  "ts||Warning||pl": "Ostrzeżenie",
  "ts||You didn't click on a layer's attribute !||pl": "Nie kliknąłeś atrybutu warstwy!",
  "ts||You must give a non-null value for a point's or line's perimeter!||pl": "Musisz podać wartość różną od null dla obwodu punktu lub linii!",
  "ts||There is no selected layer, or it is not vector nor visible!||pl": "Nie ma wybranej warstwy lub nie jest ona wektorowa ani widoczna!",
  "ts||No groups||pl": "Brak grup",
  "ts||All groups are already checked.||pl": "Wszystkie grupy zostały już sprawdzone.",
  "ts||Choose a group for selection||pl": "Wybierz grupę do wyboru",
  "ts||Choose a group from the list:||pl": "Wybierz grupę z listy:",
  "ts||WARNING!||pl": "OSTRZEŻENIE!",
  "ts||Command not available:||pl": "Polecenie niedostępne:",
  "ts||empty project.||pl": "pusty projekt.",
  "ts||Start again||pl": "Zacznij od nowa",
  "ts||No layer or group is selected.||pl": "Nie wybrano żadnej warstwy ani grupy.",
  "ts||Start again.||pl": "Zacznij od nowa.",
  "ts||Selection not possible.||pl": "Wybór niemożliwy.",
  "ts||The checked layer is not a polygon.||pl": "Zaznaczona warstwa nie jest wielokątem.",
  "ts||No layer is selected in the Layer Manager.||pl": "W Menedżerze warstw nie wybrano żadnej warstwy.",
  "ts||QdrawEVT Help - Gestion_crise||pl": "Pomoc QdrawEVT - Zarządzanie_kryzysami",
  "ts||No help file was found in the 'help' folder.||pl": "W folderze „help” nie znaleziono pliku pomocy.",
  "ts||Unable to read the help file: {error}||pl": "Nie można odczytać pliku pomocy: {error}",
  "ts||Close||pl": "Zamknąć",
  "ts||QdrawEVT - Settings||pl": "QdrawEVT – Ustawienia",
  "ts||Change the drawing color||pl": "Zmień kolor rysunku",
  "ts||Change text font||pl": "Zmień czcionkę tekstu",
  "ts||Change text color||pl": "Zmień kolor tekstu",
  "ts||Create the group and the event layers||pl": "Utwórz warstwę grupy i zdarzenia",
  "ts||Enjeux||pl": "Wyzwania",
  "ts||Aléas/risques||pl": "Zagrożenia/ryzyko",
  "ts||RDI||pl": "BRI",
  "ts||Administratif||pl": "Administracyjny",
  "ts||Fonds de plan||pl": "Planuj fundusze",
  "ts||Creation of event shapefile||pl": "Tworzenie pliku kształtu zdarzenia",
  "ts||Possible only in a saved project.||pl": "Możliwe tylko w zapisanym projekcie.",
  "ts||Error when creating shapefile||pl": "Błąd podczas tworzenia pliku kształtu",
  "ts||QdrawEVT||pl": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||pl": "Z łatwością rysuj i wybieraj elementy w obrębie rysunku",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||pl": "QdrawEVT umożliwia rysowanie punktów, linii i wielokątów bezpośrednio na mapie oraz dokonywanie selekcji przecinających się warstw.",
  "ts||A dedicated help is available from the plugin menu.||pl": "Dedykowana pomoc dostępna jest z menu wtyczki.",
  "ts||drawing, selection, events, vector, tools||pl": "rysunek, wybór, wydarzenia, wektor, narzędzia",
  "ts||François Thévand||pl": "François Thevanda",
  "ts||francois.thevand@gmail.com||pl": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||pl": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||pl": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||ro": "Dimensiunea dreptunghiului",
  "ts||Give a size in m:||ro": "Dați o dimensiune în m:",
  "ts||Width:||ro": "Lăţime:",
  "ts||Height:||ro": "Înălţime:",
  "ts||Radius||ro": "Rază",
  "ts||Give a radius in m:||ro": "Dați o rază în m:",
  "ts||DMS Point Tool||ro": "Instrumentul punctual DMS",
  "ts||Latitude||ro": "Latitudine",
  "ts||Longitude||ro": "Longitudine",
  "ts||Degrees||ro": "Grade",
  "ts||Minutes||ro": "Minute",
  "ts||Seconds||ro": "Secunde",
  "ts||Direction||ro": "Direcţie",
  "ts||XY Point drawing tool||ro": "Instrument de desenare XY Point",
  "ts||Selection made in %1 perimeter||ro": "Selecția făcută în perimetrul %1",
  "ts||Save this tab's results||ro": "Salvați rezultatele acestei file",
  "ts||Save all results||ro": "Salvați toate rezultatele",
  "ts||Export the selection as a memory layer||ro": "Exportați selecția ca strat de memorie",
  "ts||Export all tabs as a memory layer||ro": "Exportați toate filele ca strat de memorie",
  "ts||Zoom to selected attributes||ro": "Măriți la atributele selectate",
  "ts||Highlight feature's geometry||ro": "Evidențiați geometria caracteristicii",
  "ts||Settings||ro": "Setări",
  "ts||Loading...||ro": "Încărcare...",
  "ts||Rename window||ro": "Redenumiți fereastra",
  "ts||Enter a new title:||ro": "Introduceți un titlu nou:",
  "ts||Highlight feature's centroid||ro": "Evidențiați centroidul caracteristicii",
  "ts||Extracts in {name}||ro": "Extrase în {name}",
  "ts||Session||ro": "Sesiune",
  "ts||Extract {title}||ro": "Extrage {title}",
  "ts||Tab {index}||ro": "Fila {index}",
  "ts||Extract {}||ro": "Extrage {}",
  "ts||Extracts in {}||ro": "Extrase în {}",
  "ts||No items were selected||ro": "Nu au fost selectate articole",
  "ts||Selected items: {nb} Area: {area} m²||ro": "Articole selectate: {nb} Suprafață: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||ro": "Elemente selectate: {nb} - Lungime: {lenght}m",
  "ts||Selected items: {nb}||ro": "Articole selectate: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||ro": "[highlight_features] Actualizarea barei de stare a eșuat: {e_sb}",
  "ts||Apply||ro": "Aplicați",
  "ts||Cancel||ro": "Anula",
  "ts||Sheet||ro": "Foaie",
  "ts||Error||ro": "Eroare",
  "ts||Cannot create export folder.||ro": "Nu se poate crea folderul de export.",
  "ts||Selection made in||ro": "Selecția făcută în",
  "ts||Information||ro": "Informaţii",
  "ts||No active tab found.||ro": "Nu a fost găsită nicio filă activă.",
  "ts||No data to save.||ro": "Nu există date de salvat.",
  "ts||Save in...||ro": "Economisiți în...",
  "ts||OpenDocument Spreadsheet (*.ods)||ro": "OpenDocument Spreadsheet (*.ods)",
  "ts||Unable to replace the existing file.||ro": "Nu se poate înlocui fișierul existent.",
  "ts||Please close it if it is open in another application, then try again.||ro": "Închideți-l dacă este deschis într-o altă aplicație, apoi încercați din nou.",
  "ts||{path}||ro": "{path}",
  "ts||Unable to write file:||ro": "Nu se poate scrie fișierul:",
  "ts||{e_rep}||ro": "{e_rep}",
  "ts||Open file?||ro": "Deschideți fișierul?",
  "ts||ODS workbook created successfully:||ro": "Registrul de lucru ODS creat cu succes:",
  "ts||Open||ro": "Deschide",
  "ts||Unable to open the ODS file automatically:||ro": "Nu se poate deschide automat fișierul ODS:",
  "ts||{e_open}||ro": "{e_open}",
  "ts||Give a name to the item:||ro": "Dați un nume articolului:",
  "ts||Name…||ro": "Nume…",
  "ts||Text…||ro": "Text…",
  "ts||Drawing||ro": "Desen",
  "ts||Add text||ro": "Adăugați text",
  "ts||Type the text to display:||ro": "Tastați textul de afișat:",
  "ts||Add point||ro": "Adăugați punct",
  "ts||Give a name to the point:||ro": "Dați un nume la obiect:",
  "ts||Point…||ro": "Punct…",
  "ts||Add line||ro": "Adăugați linie",
  "ts||Give a name to the line:||ro": "Dați un nume liniei:",
  "ts||Line…||ro": "Linia…",
  "ts||Add polygon||ro": "Adăugați poligon",
  "ts||Give a name to the polygon:||ro": "Dați un nume poligonului:",
  "ts||Polygon…||ro": "Poligon…",
  "ts||Buffer selection||ro": "Selectarea tamponului",
  "ts||Name this selection (buffer):||ro": "Denumiți această selecție (buffer):",
  "ts||Buffer…||ro": "Tampon…",
  "ts||Add to an existing layer||ro": "Adăugați la un strat existent",
  "ts||Selecting...||ro": "Se selectează...",
  "ts||Pass||ro": "Pasa",
  "ts||Drawings||ro": "Desene",
  "ts||DMS Point drawing tool||ro": "Instrument de desenare DMS Point",
  "ts||Text drawing tool||ro": "Instrument de desenare a textului",
  "ts||Point drawing tool||ro": "Instrument de desenare a punctelor",
  "ts||Line drawing tool||ro": "Instrument de desen linie",
  "ts||Rectangle drawing tool||ro": "Instrument de desen dreptunghiular",
  "ts||Circle drawing tool||ro": "Instrument de desen cerc",
  "ts||Polygon drawing tool||ro": "Instrument de desenare a poligonului",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||ro": "Desen tampon cu selecția poligonală a obiectelor din stratul selectat",
  "ts||Buffer drawing on objects in selected layer||ro": "Desen tampon pe obiectele din stratul selectat",
  "ts||Install the Gestion_crise plugin||ro": "Instalați pluginul Crisis_management",
  "ts||Help / User manual||ro": "Ajutor / Manual de utilizare",
  "ts||No selection||ro": "Fără selecție",
  "ts||No selected items found in visible vector layers.||ro": "Nu s-au găsit elemente selectate în straturile vectoriale vizibile.",
  "ts||XY point drawing tool||ro": "Instrument de desenare a punctelor XY",
  "ts||DMS point drawing tool||ro": "Instrument de desenare a punctelor DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||ro": "Intrare incorectă sau faceți clic pe Anulare",
  "ts||Invalid input !||ro": "Intrare nevalidă!",
  "ts||Buffer drawing tool on the selected layer||ro": "Instrument de desen tampon pe stratul selectat",
  "ts||Polygon buffer drawing tool on the selected layer||ro": "Instrument de desenare tampon poligon pe stratul selectat",
  "ts||Left click to place a text.||ro": "Faceți clic stânga pentru a plasa un text.",
  "ts||Left click to place a point.||ro": "Faceți clic stânga pentru a plasa un punct.",
  "ts||Left click to place points.||ro": "Faceți clic stânga pentru a plasa puncte.",
  "ts||Right click to confirm.||ro": "Faceți clic dreapta pentru a confirma.",
  "ts||Maintain the left click to draw a rectangle.||ro": "Mențineți clicul stâng pentru a desena un dreptunghi.",
  "ts||Maintain the left click to draw a circle.||ro": "Mențineți clicul stâng pentru a desena un cerc.",
  "ts||Simple left click to give a perimeter.||ro": "Faceți clic stânga simplu pentru a da un perimetru.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||ro": "Selectați un strat vectorial în arborele straturilor, apoi selectați o entitate de pe hartă.",
  "ts||Length: {value} m||ro": "Lungime: {value} m",
  "ts||Area: {value} m²||ro": "Suprafață: {value} m²",
  "ts||No object selected||ro": "Niciun obiect selectat",
  "ts||No object was found under the click.||ro": "Nu a fost găsit niciun obiect sub clic.",
  "ts||Please click directly on an object of the active layer.||ro": "Vă rugăm să faceți clic direct pe un obiect din stratul activ.",
  "ts||Buffer creation||ro": "Crearea tamponului",
  "ts||Do you want to create a buffer around the selected object?||ro": "Doriți să creați un buffer în jurul obiectului selectat?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||ro": "Alegeți dacă selecția trebuie să folosească obiectul în sine sau un buffer în jurul acestuia.",
  "ts||Create buffer||ro": "Creați tampon",
  "ts||No buffer||ro": "Fără tampon",
  "ts||Buffer size||ro": "Dimensiunea tamponului",
  "ts||Enter the buffer size in meters:||ro": "Introduceți dimensiunea tamponului în metri:",
  "ts||(works only with a metric coordinate reference system)||ro": "(funcționează numai cu un sistem de referință de coordonate metrice)",
  "ts||Circle name||ro": "Numele cercului",
  "ts||Enter a name for the circle:||ro": "Introduceți un nume pentru cerc:",
  "ts||Circle…||ro": "Cerc…",
  "ts||Rectangle name||ro": "Nume dreptunghi",
  "ts||Enter a name for the rectangle:||ro": "Introduceți un nume pentru dreptunghi:",
  "ts||Rectangle…||ro": "Dreptunghi…",
  "ts||Polygon name||ro": "Nume poligon",
  "ts||Enter a name for the polygon:||ro": "Introduceți un nume pentru poligon:",
  "ts||Buffer name||ro": "Nume tampon",
  "ts||Enter a name for the buffer:||ro": "Introduceți un nume pentru buffer:",
  "ts||Choosing a selection||ro": "Alegerea unei selecții",
  "ts||{name} drawn.||ro": "{name} desen.",
  "ts||Make a selection within its extent?||ro": "Faceți o selecție în limita sa?",
  "ts||No group found||ro": "Nu a fost găsit niciun grup",
  "ts||Aucun groupe n’existe dans le projet.||ro": "Nu există grupuri în proiect.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||ro": "Creați un grup și alegeți straturile pe care să le puneți în el:",
  "ts||New group name||ro": "Nume nou de grup",
  "ts||Available layers||ro": "Straturi disponibile",
  "ts||You must name the group.||ro": "Trebuie să denumiți grupul.",
  "ts||Group created||ro": "Grup creat",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||ro": "Grupul {new_group_name} a fost creat și straturile selectate au fost mutate.",
  "ts||Perimeter||ro": "Perimetru",
  "ts||Give a perimeter in m:||ro": "Dați un perimetru în m:",
  "ts||(works only with metric crs)||ro": "(funcționează numai cu metric crs)",
  "ts||End of selection||ro": "Sfârșitul selecției",
  "ts||The {sel_group} group has been unchecked.||ro": "Grupul {sel_group} a fost debifat.",
  "ts||Warning||ro": "Avertizare",
  "ts||You didn't click on a layer's attribute !||ro": "Nu ai făcut clic pe atributul unui strat!",
  "ts||You must give a non-null value for a point's or line's perimeter!||ro": "Trebuie să dați o valoare non-nulă pentru perimetrul unui punct sau al unei linii!",
  "ts||There is no selected layer, or it is not vector nor visible!||ro": "Nu există un strat selectat sau nu este vector și nici vizibil!",
  "ts||No groups||ro": "Fără grupuri",
  "ts||All groups are already checked.||ro": "Toate grupurile sunt deja verificate.",
  "ts||Choose a group for selection||ro": "Alegeți un grup pentru selecție",
  "ts||Choose a group from the list:||ro": "Alegeți un grup din listă:",
  "ts||WARNING!||ro": "AVERTIZARE!",
  "ts||Command not available:||ro": "Comanda nu este disponibilă:",
  "ts||empty project.||ro": "proiect gol.",
  "ts||Start again||ro": "Începe din nou",
  "ts||No layer or group is selected.||ro": "Nu este selectat niciun strat sau grup.",
  "ts||Start again.||ro": "Începe din nou.",
  "ts||Selection not possible.||ro": "Selectarea nu este posibilă.",
  "ts||The checked layer is not a polygon.||ro": "Stratul bifat nu este un poligon.",
  "ts||No layer is selected in the Layer Manager.||ro": "Nu este selectat niciun strat în Managerul de straturi.",
  "ts||QdrawEVT Help - Gestion_crise||ro": "QdrawEVT Help - Crisis_management",
  "ts||No help file was found in the 'help' folder.||ro": "Nu a fost găsit niciun fișier de ajutor în folderul „ajutor”.",
  "ts||Unable to read the help file: {error}||ro": "Nu se poate citi fișierul de ajutor: {error}",
  "ts||Close||ro": "Aproape",
  "ts||QdrawEVT - Settings||ro": "QdrawEVT - Setări",
  "ts||Change the drawing color||ro": "Schimbați culoarea desenului",
  "ts||Change text font||ro": "Schimbați fontul textului",
  "ts||Change text color||ro": "Schimbați culoarea textului",
  "ts||Create the group and the event layers||ro": "Creați grupul și straturile de eveniment",
  "ts||Enjeux||ro": "Provocări",
  "ts||Aléas/risques||ro": "Pericole/riscuri",
  "ts||RDI||ro": "CDI",
  "ts||Administratif||ro": "Administrativ",
  "ts||Fonds de plan||ro": "Planificați fonduri",
  "ts||Creation of event shapefile||ro": "Crearea unui shapefile pentru evenimente",
  "ts||Possible only in a saved project.||ro": "Posibil numai într-un proiect salvat.",
  "ts||Error when creating shapefile||ro": "Eroare la crearea fișierului de formă",
  "ts||QdrawEVT||ro": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||ro": "Desenați și selectați cu ușurință entitățile din amprenta desenului",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||ro": "QdrawEVT vă permite să desenați puncte, linii și poligoane direct pe hartă și să efectuați selecții de straturi care se intersectează.",
  "ts||A dedicated help is available from the plugin menu.||ro": "Un ajutor dedicat este disponibil din meniul pluginului.",
  "ts||drawing, selection, events, vector, tools||ro": "desen, selecție, evenimente, vector, instrumente",
  "ts||François Thévand||ro": "François Thévand",
  "ts||francois.thevand@gmail.com||ro": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||ro": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||ro": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||ru": "Размер прямоугольника",
  "ts||Give a size in m:||ru": "Укажите размер в м:",
  "ts||Width:||ru": "Ширина:",
  "ts||Height:||ru": "Высота:",
  "ts||Radius||ru": "Радиус",
  "ts||Give a radius in m:||ru": "Укажите радиус в метрах:",
  "ts||DMS Point Tool||ru": "Инструмент точки DMS",
  "ts||Latitude||ru": "Широта",
  "ts||Longitude||ru": "Долгота",
  "ts||Degrees||ru": "Степени",
  "ts||Minutes||ru": "Минуты",
  "ts||Seconds||ru": "Секунды",
  "ts||Direction||ru": "Направление",
  "ts||XY Point drawing tool||ru": "Инструмент рисования точек XY",
  "ts||Selection made in %1 perimeter||ru": "Выбор сделан в периметре %1",
  "ts||Save this tab's results||ru": "Сохранить результаты этой вкладки",
  "ts||Save all results||ru": "Сохранить все результаты",
  "ts||Export the selection as a memory layer||ru": "Экспортировать выделение как слой памяти",
  "ts||Export all tabs as a memory layer||ru": "Экспортировать все вкладки как слой памяти",
  "ts||Zoom to selected attributes||ru": "Приблизиться к выбранным атрибутам",
  "ts||Highlight feature's geometry||ru": "Выделить геометрию объекта",
  "ts||Settings||ru": "Настройки",
  "ts||Loading...||ru": "Загрузка...",
  "ts||Rename window||ru": "Переименовать окно",
  "ts||Enter a new title:||ru": "Введите новый заголовок:",
  "ts||Highlight feature's centroid||ru": "Выделить центроид объекта",
  "ts||Extracts in {name}||ru": "Экстракты в {name}",
  "ts||Session||ru": "Сессия",
  "ts||Extract {title}||ru": "Извлеките {title}",
  "ts||Tab {index}||ru": "Вкладка {index}",
  "ts||Extract {}||ru": "Извлеките {}",
  "ts||Extracts in {}||ru": "Экстракты в {}",
  "ts||No items were selected||ru": "Ни один товар не выбран",
  "ts||Selected items: {nb} Area: {area} m²||ru": "Выбранные объекты: {nb} Площадь: {area} м²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||ru": "Выбранные элементы: {nb} – Длина: {lenght}м.",
  "ts||Selected items: {nb}||ru": "Выбранные элементы: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||ru": "[highlight_features] Не удалось обновить строку состояния: {e_sb}",
  "ts||Apply||ru": "Применять",
  "ts||Cancel||ru": "Отмена",
  "ts||Sheet||ru": "Лист",
  "ts||Error||ru": "Ошибка",
  "ts||Cannot create export folder.||ru": "Невозможно создать папку экспорта.",
  "ts||Selection made in||ru": "Выбор сделан в",
  "ts||Information||ru": "Информация",
  "ts||No active tab found.||ru": "Активная вкладка не найдена.",
  "ts||No data to save.||ru": "Нет данных для сохранения.",
  "ts||Save in...||ru": "Сохранить в...",
  "ts||OpenDocument Spreadsheet (*.ods)||ru": "Таблица OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||ru": "Невозможно заменить существующий файл.",
  "ts||Please close it if it is open in another application, then try again.||ru": "Пожалуйста, закройте его, если он открыт в другом приложении, а затем повторите попытку.",
  "ts||{path}||ru": "{path}",
  "ts||Unable to write file:||ru": "Невозможно записать файл:",
  "ts||{e_rep}||ru": "{e_rep}",
  "ts||Open file?||ru": "Открыть файл?",
  "ts||ODS workbook created successfully:||ru": "Рабочая книга ODS успешно создана:",
  "ts||Open||ru": "Открыть",
  "ts||Unable to open the ODS file automatically:||ru": "Невозможно открыть файл ODS автоматически:",
  "ts||{e_open}||ru": "{e_open}",
  "ts||Give a name to the item:||ru": "Дайте название элементу:",
  "ts||Name…||ru": "Имя…",
  "ts||Text…||ru": "Текст…",
  "ts||Drawing||ru": "Рисунок",
  "ts||Add text||ru": "Добавить текст",
  "ts||Type the text to display:||ru": "Введите текст для отображения:",
  "ts||Add point||ru": "Добавить точку",
  "ts||Give a name to the point:||ru": "Дайте название точке:",
  "ts||Point…||ru": "Точка…",
  "ts||Add line||ru": "Добавить строку",
  "ts||Give a name to the line:||ru": "Дайте имя строке:",
  "ts||Line…||ru": "Линия…",
  "ts||Add polygon||ru": "Добавить многоугольник",
  "ts||Give a name to the polygon:||ru": "Дайте имя многоугольнику:",
  "ts||Polygon…||ru": "Полигон…",
  "ts||Buffer selection||ru": "Выбор буфера",
  "ts||Name this selection (buffer):||ru": "Назовите этот выбор (буфер):",
  "ts||Buffer…||ru": "Буфер…",
  "ts||Add to an existing layer||ru": "Добавить к существующему слою",
  "ts||Selecting...||ru": "Выбор...",
  "ts||Pass||ru": "Проходить",
  "ts||Drawings||ru": "Рисунки",
  "ts||DMS Point drawing tool||ru": "Инструмент рисования точек DMS",
  "ts||Text drawing tool||ru": "Инструмент рисования текста",
  "ts||Point drawing tool||ru": "Инструмент рисования точек",
  "ts||Line drawing tool||ru": "Инструмент рисования линий",
  "ts||Rectangle drawing tool||ru": "Инструмент рисования прямоугольника",
  "ts||Circle drawing tool||ru": "Инструмент рисования кругов",
  "ts||Polygon drawing tool||ru": "Инструмент рисования многоугольников",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||ru": "Буферное рисование с полигональным выделением объектов в выбранном слое",
  "ts||Buffer drawing on objects in selected layer||ru": "Буферное рисование объектов в выбранном слое",
  "ts||Install the Gestion_crise plugin||ru": "Установите плагин Crisis_management.",
  "ts||Help / User manual||ru": "Помощь/Руководство пользователя",
  "ts||No selection||ru": "Нет выбора",
  "ts||No selected items found in visible vector layers.||ru": "В видимых векторных слоях не найдено выбранных элементов.",
  "ts||XY point drawing tool||ru": "Инструмент рисования точек XY",
  "ts||DMS point drawing tool||ru": "Инструмент рисования точек DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||ru": "Неправильный ввод или нажмите «Отмена».",
  "ts||Invalid input !||ru": "Неверный ввод!",
  "ts||Buffer drawing tool on the selected layer||ru": "Инструмент рисования буфера на выбранном слое",
  "ts||Polygon buffer drawing tool on the selected layer||ru": "Инструмент рисования полигонального буфера на выбранном слое",
  "ts||Left click to place a text.||ru": "Щелкните левой кнопкой мыши, чтобы разместить текст.",
  "ts||Left click to place a point.||ru": "Щелкните левой кнопкой мыши, чтобы разместить точку.",
  "ts||Left click to place points.||ru": "Щелкните левой кнопкой мыши, чтобы разместить точки.",
  "ts||Right click to confirm.||ru": "Щелкните правой кнопкой мыши, чтобы подтвердить.",
  "ts||Maintain the left click to draw a rectangle.||ru": "Удерживайте левую кнопку мыши, чтобы нарисовать прямоугольник.",
  "ts||Maintain the left click to draw a circle.||ru": "Удерживайте левую кнопку мыши, чтобы нарисовать круг.",
  "ts||Simple left click to give a perimeter.||ru": "Просто щелкните левой кнопкой мыши, чтобы определить периметр.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||ru": "Выберите векторный слой в дереве слоев, затем выберите объект на карте.",
  "ts||Length: {value} m||ru": "Длина: {value} м",
  "ts||Area: {value} m²||ru": "Площадь: {value} м²",
  "ts||No object selected||ru": "Объект не выбран",
  "ts||No object was found under the click.||ru": "Под кликом не было обнаружено ни одного объекта.",
  "ts||Please click directly on an object of the active layer.||ru": "Пожалуйста, нажмите непосредственно на объект активного слоя.",
  "ts||Buffer creation||ru": "Создание буфера",
  "ts||Do you want to create a buffer around the selected object?||ru": "Хотите создать буфер вокруг выбранного объекта?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||ru": "Выберите, должен ли при выделении использоваться сам объект или буфер вокруг него.",
  "ts||Create buffer||ru": "Создать буфер",
  "ts||No buffer||ru": "Нет буфера",
  "ts||Buffer size||ru": "Размер буфера",
  "ts||Enter the buffer size in meters:||ru": "Введите размер буфера в метрах:",
  "ts||(works only with a metric coordinate reference system)||ru": "(работает только с метрической системой координат)",
  "ts||Circle name||ru": "Название круга",
  "ts||Enter a name for the circle:||ru": "Введите название круга:",
  "ts||Circle…||ru": "Круг…",
  "ts||Rectangle name||ru": "Имя прямоугольника",
  "ts||Enter a name for the rectangle:||ru": "Введите имя прямоугольника:",
  "ts||Rectangle…||ru": "Прямоугольник…",
  "ts||Polygon name||ru": "Имя полигона",
  "ts||Enter a name for the polygon:||ru": "Введите имя многоугольника:",
  "ts||Buffer name||ru": "Имя буфера",
  "ts||Enter a name for the buffer:||ru": "Введите имя буфера:",
  "ts||Choosing a selection||ru": "Выбор выбора",
  "ts||{name} drawn.||ru": "{name} нарисовано.",
  "ts||Make a selection within its extent?||ru": "Сделать выбор в пределах его объема?",
  "ts||No group found||ru": "Группа не найдена",
  "ts||Aucun groupe n’existe dans le projet.||ru": "В проекте нет групп.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||ru": "Создайте группу и выберите слои, которые нужно поместить в нее:",
  "ts||New group name||ru": "Новое название группы",
  "ts||Available layers||ru": "Доступные слои",
  "ts||You must name the group.||ru": "Вы должны назвать группу.",
  "ts||Group created||ru": "Группа создана",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||ru": "Группа {new_group_name} создана, и выбранные слои перемещены.",
  "ts||Perimeter||ru": "Периметр",
  "ts||Give a perimeter in m:||ru": "Укажите периметр в метрах:",
  "ts||(works only with metric crs)||ru": "(работает только с метрикой crs)",
  "ts||End of selection||ru": "Конец выбора",
  "ts||The {sel_group} group has been unchecked.||ru": "Группа {sel_group} снята.",
  "ts||Warning||ru": "Предупреждение",
  "ts||You didn't click on a layer's attribute !||ru": "Вы не щелкнули атрибут слоя!",
  "ts||You must give a non-null value for a point's or line's perimeter!||ru": "Вы должны указать ненулевое значение для периметра точки или линии!",
  "ts||There is no selected layer, or it is not vector nor visible!||ru": "Выделенного слоя нет, или он не векторный и не виден!",
  "ts||No groups||ru": "Нет групп",
  "ts||All groups are already checked.||ru": "Все группы уже проверены.",
  "ts||Choose a group for selection||ru": "Выберите группу для выбора",
  "ts||Choose a group from the list:||ru": "Выберите группу из списка:",
  "ts||WARNING!||ru": "ПРЕДУПРЕЖДЕНИЕ!",
  "ts||Command not available:||ru": "Команда недоступна:",
  "ts||empty project.||ru": "пустой проект.",
  "ts||Start again||ru": "Начать заново",
  "ts||No layer or group is selected.||ru": "Ни один слой или группа не выбраны.",
  "ts||Start again.||ru": "Начни заново.",
  "ts||Selection not possible.||ru": "Выбор невозможен.",
  "ts||The checked layer is not a polygon.||ru": "Отмеченный слой не является многоугольником.",
  "ts||No layer is selected in the Layer Manager.||ru": "В Диспетчере слоев не выбран ни один слой.",
  "ts||QdrawEVT Help - Gestion_crise||ru": "Справка по QdrawEVT - Crisis_management",
  "ts||No help file was found in the 'help' folder.||ru": "В папке «help» не найден файл справки.",
  "ts||Unable to read the help file: {error}||ru": "Невозможно прочитать файл справки: {error}.",
  "ts||Close||ru": "Закрывать",
  "ts||QdrawEVT - Settings||ru": "QdrawEVT — Настройки",
  "ts||Change the drawing color||ru": "Изменить цвет рисунка",
  "ts||Change text font||ru": "Изменить шрифт текста",
  "ts||Change text color||ru": "Изменить цвет текста",
  "ts||Create the group and the event layers||ru": "Создайте группу и слои событий.",
  "ts||Enjeux||ru": "Проблемы",
  "ts||Aléas/risques||ru": "Опасности/риски",
  "ts||RDI||ru": "НИИ",
  "ts||Administratif||ru": "Административный",
  "ts||Fonds de plan||ru": "Планируйте средства",
  "ts||Creation of event shapefile||ru": "Создание шейп-файла события",
  "ts||Possible only in a saved project.||ru": "Возможно только в сохраненном проекте.",
  "ts||Error when creating shapefile||ru": "Ошибка при создании шейп-файла",
  "ts||QdrawEVT||ru": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||ru": "Легко рисовать и выбирать объекты в пределах контура чертежа.",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||ru": "QdrawEVT позволяет рисовать точки, линии и полигоны прямо на карте и выполнять выборку пересекающихся слоев.",
  "ts||A dedicated help is available from the plugin menu.||ru": "Специальная справка доступна в меню плагина.",
  "ts||drawing, selection, events, vector, tools||ru": "рисунок, выделение, события, вектор, инструменты",
  "ts||François Thévand||ru": "Франсуа Теван",
  "ts||francois.thevand@gmail.com||ru": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||ru": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||ru": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||he": "גודל מלבן",
  "ts||Give a size in m:||he": "תן מידה ב-m:",
  "ts||Width:||he": "רוֹחַב:",
  "ts||Height:||he": "גוֹבַה:",
  "ts||Radius||he": "רַדִיוּס",
  "ts||Give a radius in m:||he": "תן רדיוס ב-m:",
  "ts||DMS Point Tool||he": "כלי DMS Point",
  "ts||Latitude||he": "רוֹחַב",
  "ts||Longitude||he": "קו אורך",
  "ts||Degrees||he": "מעלות",
  "ts||Minutes||he": "פּרוֹטוֹקוֹל",
  "ts||Seconds||he": "שניות",
  "ts||Direction||he": "כיוון",
  "ts||XY Point drawing tool||he": "כלי ציור XY Point",
  "ts||Selection made in %1 perimeter||he": "הבחירה נעשתה בהיקף %1",
  "ts||Save this tab's results||he": "שמור את התוצאות של כרטיסייה זו",
  "ts||Save all results||he": "שמור את כל התוצאות",
  "ts||Export the selection as a memory layer||he": "ייצא את הבחירה כשכבת זיכרון",
  "ts||Export all tabs as a memory layer||he": "ייצא את כל הכרטיסיות כשכבת זיכרון",
  "ts||Zoom to selected attributes||he": "התקרב לתכונות שנבחרו",
  "ts||Highlight feature's geometry||he": "הדגש את הגיאומטריה של התכונה",
  "ts||Settings||he": "הגדרות",
  "ts||Loading...||he": "טְעִינָה...",
  "ts||Rename window||he": "שנה את שם החלון",
  "ts||Enter a new title:||he": "הזן כותרת חדשה:",
  "ts||Highlight feature's centroid||he": "הדגש את מרכז התכונה",
  "ts||Extracts in {name}||he": "מחלצים ב-{name}",
  "ts||Session||he": "מוֹשָׁב",
  "ts||Extract {title}||he": "חלץ {title}",
  "ts||Tab {index}||he": "כרטיסייה {index}",
  "ts||Extract {}||he": "חלץ {}",
  "ts||Extracts in {}||he": "מחלצים ב-{}",
  "ts||No items were selected||he": "לא נבחרו פריטים",
  "ts||Selected items: {nb} Area: {area} m²||he": "פריטים נבחרים: {nb} שטח: {area} מ\"ר",
  "ts||Selected itemss: {nb} - Length: {lenght}m||he": "פריטים נבחרים: {nb} - אורך: {lenght}m",
  "ts||Selected items: {nb}||he": "פריטים שנבחרו: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||he": "[highlight_features] עדכון שורת המצב נכשל: {e_sb}",
  "ts||Apply||he": "לִפְנוֹת",
  "ts||Cancel||he": "לְבַטֵל",
  "ts||Sheet||he": "דַף",
  "ts||Error||he": "שְׁגִיאָה",
  "ts||Cannot create export folder.||he": "לא ניתן ליצור תיקיית ייצוא.",
  "ts||Selection made in||he": "הבחירה נעשתה ב",
  "ts||Information||he": "מֵידָע",
  "ts||No active tab found.||he": "לא נמצאה כרטיסייה פעילה.",
  "ts||No data to save.||he": "אין נתונים לשמירה.",
  "ts||Save in...||he": "שמור ב...",
  "ts||OpenDocument Spreadsheet (*.ods)||he": "גיליון אלקטרוני של OpenDocument (*.ods)",
  "ts||Unable to replace the existing file.||he": "לא ניתן להחליף את הקובץ הקיים.",
  "ts||Please close it if it is open in another application, then try again.||he": "אנא סגור אותו אם הוא פתוח ביישום אחר, ולאחר מכן נסה שוב.",
  "ts||{path}||he": "{path}",
  "ts||Unable to write file:||he": "לא מצליח לכתוב קובץ:",
  "ts||{e_rep}||he": "{e_rep}",
  "ts||Open file?||he": "לפתוח קובץ?",
  "ts||ODS workbook created successfully:||he": "חוברת עבודה של ODS נוצרה בהצלחה:",
  "ts||Open||he": "לִפְתוֹחַ",
  "ts||Unable to open the ODS file automatically:||he": "לא ניתן לפתוח את קובץ ה-ODS באופן אוטומטי:",
  "ts||{e_open}||he": "{e_open}",
  "ts||Give a name to the item:||he": "תן שם לפריט:",
  "ts||Name…||he": "שֵׁם…",
  "ts||Text…||he": "טֶקסט…",
  "ts||Drawing||he": "צִיוּר",
  "ts||Add text||he": "הוסף טקסט",
  "ts||Type the text to display:||he": "הקלד את הטקסט להצגה:",
  "ts||Add point||he": "הוסף נקודה",
  "ts||Give a name to the point:||he": "תן שם לנקודה:",
  "ts||Point…||he": "נְקוּדָה…",
  "ts||Add line||he": "הוסף שורה",
  "ts||Give a name to the line:||he": "תן שם לשורה:",
  "ts||Line…||he": "קַו…",
  "ts||Add polygon||he": "הוסף מצולע",
  "ts||Give a name to the polygon:||he": "תן שם למצולע:",
  "ts||Polygon…||he": "מְצוּלָע…",
  "ts||Buffer selection||he": "בחירת מאגר",
  "ts||Name this selection (buffer):||he": "תן שם לבחירה הזו (מאגר):",
  "ts||Buffer…||he": "בַּלָם…",
  "ts||Add to an existing layer||he": "הוסף לשכבה קיימת",
  "ts||Selecting...||he": "בוחר...",
  "ts||Pass||he": "לַעֲבוֹר",
  "ts||Drawings||he": "ציורים",
  "ts||DMS Point drawing tool||he": "כלי ציור DMS Point",
  "ts||Text drawing tool||he": "כלי לציור טקסט",
  "ts||Point drawing tool||he": "כלי לציור נקודות",
  "ts||Line drawing tool||he": "כלי לציור קווים",
  "ts||Rectangle drawing tool||he": "כלי ציור מלבנים",
  "ts||Circle drawing tool||he": "כלי לציור מעגלים",
  "ts||Polygon drawing tool||he": "כלי ציור מצולע",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||he": "ציור מאגר עם בחירה מצולעת של אובייקטים בשכבה שנבחרה",
  "ts||Buffer drawing on objects in selected layer||he": "ציור במאגר על אובייקטים בשכבה שנבחרה",
  "ts||Install the Gestion_crise plugin||he": "התקן את הפלאגין Crisis_management",
  "ts||Help / User manual||he": "עזרה / מדריך למשתמש",
  "ts||No selection||he": "אין בחירה",
  "ts||No selected items found in visible vector layers.||he": "לא נמצאו פריטים נבחרים בשכבות וקטוריות גלויות.",
  "ts||XY point drawing tool||he": "כלי ציור נקודת XY",
  "ts||DMS point drawing tool||he": "כלי ציור נקודות DMS",
  "ts||Saisie incorrecte ou clic sur Annuler||he": "הזנה שגויה או לחץ על ביטול",
  "ts||Invalid input !||he": "קלט לא חוקי!",
  "ts||Buffer drawing tool on the selected layer||he": "כלי ציור מאגר בשכבה שנבחרה",
  "ts||Polygon buffer drawing tool on the selected layer||he": "כלי ציור מאגר מצולע בשכבה שנבחרה",
  "ts||Left click to place a text.||he": "לחץ שמאלי כדי למקם טקסט.",
  "ts||Left click to place a point.||he": "לחץ שמאלי כדי למקם נקודה.",
  "ts||Left click to place points.||he": "לחץ שמאלי כדי למקם נקודות.",
  "ts||Right click to confirm.||he": "לחץ לחיצה ימנית כדי לאשר.",
  "ts||Maintain the left click to draw a rectangle.||he": "שמור על הקליק השמאלי כדי לצייר מלבן.",
  "ts||Maintain the left click to draw a circle.||he": "שמור על הקליק השמאלי כדי לצייר עיגול.",
  "ts||Simple left click to give a perimeter.||he": "לחץ שמאל פשוט כדי לתת היקף.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||he": "בחר שכבה וקטורית בעץ השכבות ולאחר מכן בחר ישות במפה.",
  "ts||Length: {value} m||he": "אורך: {value} מ'",
  "ts||Area: {value} m²||he": "שטח: {value} מ\"ר",
  "ts||No object selected||he": "לא נבחר אובייקט",
  "ts||No object was found under the click.||he": "לא נמצא אובייקט תחת הקליק.",
  "ts||Please click directly on an object of the active layer.||he": "אנא לחץ ישירות על אובייקט בשכבה הפעילה.",
  "ts||Buffer creation||he": "יצירת מאגר",
  "ts||Do you want to create a buffer around the selected object?||he": "האם ברצונך ליצור מאגר סביב האובייקט שנבחר?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||he": "בחר אם הבחירה חייבת להשתמש באובייקט עצמו או במאגר סביבו.",
  "ts||Create buffer||he": "צור מאגר",
  "ts||No buffer||he": "אין חיץ",
  "ts||Buffer size||he": "גודל מאגר",
  "ts||Enter the buffer size in meters:||he": "הזן את גודל המאגר במטרים:",
  "ts||(works only with a metric coordinate reference system)||he": "(עובד רק עם מערכת התייחסות לקואורדינטות מטריות)",
  "ts||Circle name||he": "שם מעגל",
  "ts||Enter a name for the circle:||he": "הזן שם למעגל:",
  "ts||Circle…||he": "מַעְגָל…",
  "ts||Rectangle name||he": "שם מלבן",
  "ts||Enter a name for the rectangle:||he": "הזן שם למלבן:",
  "ts||Rectangle…||he": "מַלבֵּן…",
  "ts||Polygon name||he": "שם מצולע",
  "ts||Enter a name for the polygon:||he": "הזן שם למצולע:",
  "ts||Buffer name||he": "שם מאגר",
  "ts||Enter a name for the buffer:||he": "הזן שם למאגר:",
  "ts||Choosing a selection||he": "בחירת מבחר",
  "ts||{name} drawn.||he": "{name} צוירו.",
  "ts||Make a selection within its extent?||he": "לעשות בחירה בהיקף שלה?",
  "ts||No group found||he": "לא נמצאה קבוצה",
  "ts||Aucun groupe n’existe dans le projet.||he": "אין קבוצות בפרויקט.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||he": "צור קבוצה ובחר את השכבות להכניס בה:",
  "ts||New group name||he": "שם קבוצה חדש",
  "ts||Available layers||he": "שכבות זמינות",
  "ts||You must name the group.||he": "עליך לתת שם לקבוצה.",
  "ts||Group created||he": "הקבוצה נוצרה",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||he": "הקבוצה {new_group_name} נוצרה והשכבות שנבחרו הועברו.",
  "ts||Perimeter||he": "היקפי",
  "ts||Give a perimeter in m:||he": "תן היקף ב-m:",
  "ts||(works only with metric crs)||he": "(עובד רק עם crs מטרי)",
  "ts||End of selection||he": "סוף הבחירה",
  "ts||The {sel_group} group has been unchecked.||he": "קבוצת {sel_group} בוטלה.",
  "ts||Warning||he": "אַזהָרָה",
  "ts||You didn't click on a layer's attribute !||he": "לא לחצת על תכונה של שכבה!",
  "ts||You must give a non-null value for a point's or line's perimeter!||he": "עליך לתת ערך לא ריק עבור היקף של נקודה או קו!",
  "ts||There is no selected layer, or it is not vector nor visible!||he": "אין שכבה נבחרת, או שהיא אינה וקטורית ואינה גלויה!",
  "ts||No groups||he": "אין קבוצות",
  "ts||All groups are already checked.||he": "כל הקבוצות כבר מסומנות.",
  "ts||Choose a group for selection||he": "בחר קבוצה לבחירה",
  "ts||Choose a group from the list:||he": "בחר קבוצה מהרשימה:",
  "ts||WARNING!||he": "אַזהָרָה!",
  "ts||Command not available:||he": "הפקודה לא זמינה:",
  "ts||empty project.||he": "פרויקט ריק.",
  "ts||Start again||he": "התחל שוב",
  "ts||No layer or group is selected.||he": "לא נבחרה שכבה או קבוצה.",
  "ts||Start again.||he": "התחל שוב.",
  "ts||Selection not possible.||he": "בחירה לא אפשרית.",
  "ts||The checked layer is not a polygon.||he": "השכבה המסומנת אינה מצולע.",
  "ts||No layer is selected in the Layer Manager.||he": "לא נבחרה שכבה במנהל השכבות.",
  "ts||QdrawEVT Help - Gestion_crise||he": "QdrawEVT עזרה - ניהול משברים",
  "ts||No help file was found in the 'help' folder.||he": "לא נמצא קובץ עזרה בתיקיית 'עזרה'.",
  "ts||Unable to read the help file: {error}||he": "לא ניתן לקרוא את קובץ העזרה: {error}",
  "ts||Close||he": "לִסְגוֹר",
  "ts||QdrawEVT - Settings||he": "QdrawEVT - הגדרות",
  "ts||Change the drawing color||he": "שנה את צבע הציור",
  "ts||Change text font||he": "שנה גופן טקסט",
  "ts||Change text color||he": "שנה צבע טקסט",
  "ts||Create the group and the event layers||he": "צור את הקבוצה ואת שכבות האירוע",
  "ts||Enjeux||he": "אתגרים",
  "ts||Aléas/risques||he": "סיכונים/סיכונים",
  "ts||RDI||he": "RDI",
  "ts||Administratif||he": "מִנהָלִי",
  "ts||Fonds de plan||he": "תכנן כספים",
  "ts||Creation of event shapefile||he": "יצירת קובץ shapefile לאירועים",
  "ts||Possible only in a saved project.||he": "אפשרי רק בפרויקט שמור.",
  "ts||Error when creating shapefile||he": "שגיאה בעת יצירת shapefile",
  "ts||QdrawEVT||he": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||he": "צייר ובחר בקלות ישויות בתוך טביעת הרגל של הציור",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||he": "QdrawEVT מאפשר לך לצייר נקודות, קווים ומצולעים ישירות על המפה ולבצע בחירות של שכבות מצטלבות.",
  "ts||A dedicated help is available from the plugin menu.||he": "עזרה ייעודית זמינה מתפריט התוספים.",
  "ts||drawing, selection, events, vector, tools||he": "ציור, בחירה, אירועים, וקטור, כלים",
  "ts||François Thévand||he": "פרנסואה ת'וואנד",
  "ts||francois.thevand@gmail.com||he": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||he": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||he": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||zh-cn": "矩形尺寸",
  "ts||Give a size in m:||zh-cn": "给出一个以米为单位的尺寸：",
  "ts||Width:||zh-cn": "宽度：",
  "ts||Height:||zh-cn": "高度：",
  "ts||Radius||zh-cn": "半径",
  "ts||Give a radius in m:||zh-cn": "给出以米为单位的半径：",
  "ts||DMS Point Tool||zh-cn": "DMS 点工具",
  "ts||Latitude||zh-cn": "纬度",
  "ts||Longitude||zh-cn": "经度",
  "ts||Degrees||zh-cn": "度数",
  "ts||Minutes||zh-cn": "分钟",
  "ts||Seconds||zh-cn": "秒数",
  "ts||Direction||zh-cn": "方向",
  "ts||XY Point drawing tool||zh-cn": "XY 点绘图工具",
  "ts||Selection made in %1 perimeter||zh-cn": "在 %1 周边进行选择",
  "ts||Save this tab's results||zh-cn": "保存此选项卡的结果",
  "ts||Save all results||zh-cn": "保存所有结果",
  "ts||Export the selection as a memory layer||zh-cn": "将选区导出为内存层",
  "ts||Export all tabs as a memory layer||zh-cn": "将所有选项卡导出为内存层",
  "ts||Zoom to selected attributes||zh-cn": "缩放至选定的属性",
  "ts||Highlight feature's geometry||zh-cn": "突出显示特征的几何形状",
  "ts||Settings||zh-cn": "设置",
  "ts||Loading...||zh-cn": "加载中...",
  "ts||Rename window||zh-cn": "重命名窗口",
  "ts||Enter a new title:||zh-cn": "输入新标题：",
  "ts||Highlight feature's centroid||zh-cn": "突出显示特征的质心",
  "ts||Extracts in {name}||zh-cn": "{name} 中的摘录",
  "ts||Session||zh-cn": "会议",
  "ts||Extract {title}||zh-cn": "提取 {title}",
  "ts||Tab {index}||zh-cn": "选项卡 {index}",
  "ts||Extract {}||zh-cn": "提取 {}",
  "ts||Extracts in {}||zh-cn": "{} 中的摘录",
  "ts||No items were selected||zh-cn": "没有选择任何项目",
  "ts||Selected items: {nb} Area: {area} m²||zh-cn": "所选项目：{nb} 面积：{area} 平方米",
  "ts||Selected itemss: {nb} - Length: {lenght}m||zh-cn": "所选商品：{nb} - 长度：{lenght}m",
  "ts||Selected items: {nb}||zh-cn": "所选项目：{nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||zh-cn": "[highlight_features] 状态栏更新失败：{e_sb}",
  "ts||Apply||zh-cn": "申请",
  "ts||Cancel||zh-cn": "取消",
  "ts||Sheet||zh-cn": "床单",
  "ts||Error||zh-cn": "错误",
  "ts||Cannot create export folder.||zh-cn": "无法创建导出文件夹。",
  "ts||Selection made in||zh-cn": "选择于",
  "ts||Information||zh-cn": "信息",
  "ts||No active tab found.||zh-cn": "未找到活动选项卡。",
  "ts||No data to save.||zh-cn": "没有要保存的数据。",
  "ts||Save in...||zh-cn": "保存在...",
  "ts||OpenDocument Spreadsheet (*.ods)||zh-cn": "OpenDocument 电子表格 (*.ods)",
  "ts||Unable to replace the existing file.||zh-cn": "无法替换现有文件。",
  "ts||Please close it if it is open in another application, then try again.||zh-cn": "如果它在其他应用程序中打开，请关闭它，然后重试。",
  "ts||{path}||zh-cn": "{path}",
  "ts||Unable to write file:||zh-cn": "无法写入文件：",
  "ts||{e_rep}||zh-cn": "{e_rep}",
  "ts||Open file?||zh-cn": "打开文件？",
  "ts||ODS workbook created successfully:||zh-cn": "ODS 工作簿创建成功：",
  "ts||Open||zh-cn": "打开",
  "ts||Unable to open the ODS file automatically:||zh-cn": "无法自动打开 ODS 文件：",
  "ts||{e_open}||zh-cn": "{e_open}",
  "ts||Give a name to the item:||zh-cn": "为该项目命名：",
  "ts||Name…||zh-cn": "姓名…",
  "ts||Text…||zh-cn": "文本…",
  "ts||Drawing||zh-cn": "绘画",
  "ts||Add text||zh-cn": "添加文字",
  "ts||Type the text to display:||zh-cn": "输入要显示的文本：",
  "ts||Add point||zh-cn": "添加点",
  "ts||Give a name to the point:||zh-cn": "给这个点起个名字：",
  "ts||Point…||zh-cn": "观点…",
  "ts||Add line||zh-cn": "添加行",
  "ts||Give a name to the line:||zh-cn": "给该行命名：",
  "ts||Line…||zh-cn": "线…",
  "ts||Add polygon||zh-cn": "添加多边形",
  "ts||Give a name to the polygon:||zh-cn": "为多边形命名：",
  "ts||Polygon…||zh-cn": "多边形…",
  "ts||Buffer selection||zh-cn": "缓冲液选择",
  "ts||Name this selection (buffer):||zh-cn": "将此选择命名为（缓冲区）：",
  "ts||Buffer…||zh-cn": "缓冲…",
  "ts||Add to an existing layer||zh-cn": "添加到现有图层",
  "ts||Selecting...||zh-cn": "正在选择...",
  "ts||Pass||zh-cn": "经过",
  "ts||Drawings||zh-cn": "图纸",
  "ts||DMS Point drawing tool||zh-cn": "DMS点绘图工具",
  "ts||Text drawing tool||zh-cn": "文字绘图工具",
  "ts||Point drawing tool||zh-cn": "点绘图工具",
  "ts||Line drawing tool||zh-cn": "画线工具",
  "ts||Rectangle drawing tool||zh-cn": "矩形绘图工具",
  "ts||Circle drawing tool||zh-cn": "圆形绘图工具",
  "ts||Polygon drawing tool||zh-cn": "多边形绘制工具",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||zh-cn": "使用选定图层中对象的多边形选择进行缓冲区绘制",
  "ts||Buffer drawing on objects in selected layer||zh-cn": "在选定图层中的对象上绘制缓冲区",
  "ts||Install the Gestion_crise plugin||zh-cn": "安装 Crisis_management 插件",
  "ts||Help / User manual||zh-cn": "帮助/用户手册",
  "ts||No selection||zh-cn": "没有选择",
  "ts||No selected items found in visible vector layers.||zh-cn": "在可见矢量图层中找不到选定的项目。",
  "ts||XY point drawing tool||zh-cn": "XY点绘图工具",
  "ts||DMS point drawing tool||zh-cn": "DMS点绘图工具",
  "ts||Saisie incorrecte ou clic sur Annuler||zh-cn": "输入错误或点击取消",
  "ts||Invalid input !||zh-cn": "输入无效！",
  "ts||Buffer drawing tool on the selected layer||zh-cn": "选定图层上的缓冲区绘图工具",
  "ts||Polygon buffer drawing tool on the selected layer||zh-cn": "选定图层上的多边形缓冲区绘制工具",
  "ts||Left click to place a text.||zh-cn": "左键单击放置文本。",
  "ts||Left click to place a point.||zh-cn": "左键单击放置一个点。",
  "ts||Left click to place points.||zh-cn": "左键单击放置点。",
  "ts||Right click to confirm.||zh-cn": "右键单击确认。",
  "ts||Maintain the left click to draw a rectangle.||zh-cn": "保持左键单击绘制一个矩形。",
  "ts||Maintain the left click to draw a circle.||zh-cn": "保持左键单击画一个圆。",
  "ts||Simple left click to give a perimeter.||zh-cn": "只需单击左键即可给出周长。",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||zh-cn": "在图层树中选择一个矢量图层，然后在地图上选择一个实体。",
  "ts||Length: {value} m||zh-cn": "长度：{value} 米",
  "ts||Area: {value} m²||zh-cn": "面积：{value} 平方米",
  "ts||No object selected||zh-cn": "未选择对象",
  "ts||No object was found under the click.||zh-cn": "单击下未找到任何对象。",
  "ts||Please click directly on an object of the active layer.||zh-cn": "请直接单击活动图层的对象。",
  "ts||Buffer creation||zh-cn": "缓冲区创建",
  "ts||Do you want to create a buffer around the selected object?||zh-cn": "您想在所选对象周围创建缓冲区吗？",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||zh-cn": "选择选择是否必须使用对象本身或其周围的缓冲区。",
  "ts||Create buffer||zh-cn": "创建缓冲区",
  "ts||No buffer||zh-cn": "无缓冲",
  "ts||Buffer size||zh-cn": "缓冲区大小",
  "ts||Enter the buffer size in meters:||zh-cn": "输入缓冲区大小（以米为单位）：",
  "ts||(works only with a metric coordinate reference system)||zh-cn": "（仅适用于公制坐标参考系）",
  "ts||Circle name||zh-cn": "圈子名称",
  "ts||Enter a name for the circle:||zh-cn": "输入圆的名称：",
  "ts||Circle…||zh-cn": "圆圈…",
  "ts||Rectangle name||zh-cn": "矩形名称",
  "ts||Enter a name for the rectangle:||zh-cn": "输入矩形的名称：",
  "ts||Rectangle…||zh-cn": "长方形…",
  "ts||Polygon name||zh-cn": "多边形名称",
  "ts||Enter a name for the polygon:||zh-cn": "输入多边形的名称：",
  "ts||Buffer name||zh-cn": "缓冲区名称",
  "ts||Enter a name for the buffer:||zh-cn": "输入缓冲区的名称：",
  "ts||Choosing a selection||zh-cn": "选择一个选择",
  "ts||{name} drawn.||zh-cn": "{name} 已绘制。",
  "ts||Make a selection within its extent?||zh-cn": "在自己的范围内做出选择？",
  "ts||No group found||zh-cn": "没有找到组",
  "ts||Aucun groupe n’existe dans le projet.||zh-cn": "项目中不存在组。",
  "ts||Créez un groupe et choisissez les couches à y mettre :||zh-cn": "创建一个组并选择要放入其中的图层：",
  "ts||New group name||zh-cn": "新组名",
  "ts||Available layers||zh-cn": "可用层",
  "ts||You must name the group.||zh-cn": "您必须为该组命名。",
  "ts||Group created||zh-cn": "群组已创建",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||zh-cn": "{new_group_name} 组已创建，所选图层已移动。",
  "ts||Perimeter||zh-cn": "周长",
  "ts||Give a perimeter in m:||zh-cn": "给出周长（以米为单位）：",
  "ts||(works only with metric crs)||zh-cn": "（仅适用于公制 crs）",
  "ts||End of selection||zh-cn": "选择结束",
  "ts||The {sel_group} group has been unchecked.||zh-cn": "{sel_group} 组已取消选中。",
  "ts||Warning||zh-cn": "警告",
  "ts||You didn't click on a layer's attribute !||zh-cn": "您没有点击图层的属性！",
  "ts||You must give a non-null value for a point's or line's perimeter!||zh-cn": "您必须为点或线的周长提供非空值！",
  "ts||There is no selected layer, or it is not vector nor visible!||zh-cn": "没有选定的图层，或者它不是矢量也不可见！",
  "ts||No groups||zh-cn": "没有团体",
  "ts||All groups are already checked.||zh-cn": "所有组均已检查。",
  "ts||Choose a group for selection||zh-cn": "选择一个组进行选择",
  "ts||Choose a group from the list:||zh-cn": "从列表中选择一个组：",
  "ts||WARNING!||zh-cn": "警告！",
  "ts||Command not available:||zh-cn": "命令不可用：",
  "ts||empty project.||zh-cn": "空项目。",
  "ts||Start again||zh-cn": "重新开始",
  "ts||No layer or group is selected.||zh-cn": "未选择任何图层或组。",
  "ts||Start again.||zh-cn": "重新开始。",
  "ts||Selection not possible.||zh-cn": "无法选择。",
  "ts||The checked layer is not a polygon.||zh-cn": "选中的图层不是多边形。",
  "ts||No layer is selected in the Layer Manager.||zh-cn": "图层管理器​​中未选择任何图层。",
  "ts||QdrawEVT Help - Gestion_crise||zh-cn": "QdrawEVT 帮助 - Crisis_management",
  "ts||No help file was found in the 'help' folder.||zh-cn": "在“帮助”文件夹中找不到帮助文件。",
  "ts||Unable to read the help file: {error}||zh-cn": "无法读取帮助文件：{error}",
  "ts||Close||zh-cn": "关闭",
  "ts||QdrawEVT - Settings||zh-cn": "QdrawEVT - 设置",
  "ts||Change the drawing color||zh-cn": "更改绘图颜色",
  "ts||Change text font||zh-cn": "更改文本字体",
  "ts||Change text color||zh-cn": "更改文字颜色",
  "ts||Create the group and the event layers||zh-cn": "创建组和事件图层",
  "ts||Enjeux||zh-cn": "挑战",
  "ts||Aléas/risques||zh-cn": "危害/风险",
  "ts||RDI||zh-cn": "每日摄入量",
  "ts||Administratif||zh-cn": "行政",
  "ts||Fonds de plan||zh-cn": "计划资金",
  "ts||Creation of event shapefile||zh-cn": "创建事件形状文件",
  "ts||Possible only in a saved project.||zh-cn": "只能在已保存的项目中使用。",
  "ts||Error when creating shapefile||zh-cn": "创建 shapefile 时出错",
  "ts||QdrawEVT||zh-cn": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||zh-cn": "在绘图范围内轻松绘制和选择实体",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||zh-cn": "QdrawEVT 允许您直接在地图上绘制点、线和多边形，并执行相交图层的选择。",
  "ts||A dedicated help is available from the plugin menu.||zh-cn": "插件菜单中提供了专门的帮助。",
  "ts||drawing, selection, events, vector, tools||zh-cn": "绘图、选择、事件、矢量、工具",
  "ts||François Thévand||zh-cn": "弗朗索瓦·泰万",
  "ts||francois.thevand@gmail.com||zh-cn": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||zh-cn": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||zh-cn": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||ja": "長方形のサイズ",
  "ts||Give a size in m:||ja": "サイズを m 単位で指定します。",
  "ts||Width:||ja": "幅：",
  "ts||Height:||ja": "身長：",
  "ts||Radius||ja": "半径",
  "ts||Give a radius in m:||ja": "半径を m 単位で指定します。",
  "ts||DMS Point Tool||ja": "DMS ポイントツール",
  "ts||Latitude||ja": "緯度",
  "ts||Longitude||ja": "経度",
  "ts||Degrees||ja": "学位",
  "ts||Minutes||ja": "分",
  "ts||Seconds||ja": "秒",
  "ts||Direction||ja": "方向",
  "ts||XY Point drawing tool||ja": "XY点描画ツール",
  "ts||Selection made in %1 perimeter||ja": "%1 の境界内で選択が行われました",
  "ts||Save this tab's results||ja": "このタブの結果を保存します",
  "ts||Save all results||ja": "すべての結果を保存する",
  "ts||Export the selection as a memory layer||ja": "選択範囲をメモリレイヤーとしてエクスポートします",
  "ts||Export all tabs as a memory layer||ja": "すべてのタブをメモリレイヤーとしてエクスポート",
  "ts||Zoom to selected attributes||ja": "選択した属性にズームする",
  "ts||Highlight feature's geometry||ja": "フィーチャのジオメトリをハイライト表示する",
  "ts||Settings||ja": "設定",
  "ts||Loading...||ja": "読み込み中...",
  "ts||Rename window||ja": "ウィンドウの名前を変更",
  "ts||Enter a new title:||ja": "新しいタイトルを入力してください:",
  "ts||Highlight feature's centroid||ja": "フィーチャの重心をハイライトします",
  "ts||Extracts in {name}||ja": "{name} の抽出",
  "ts||Session||ja": "セッション",
  "ts||Extract {title}||ja": "{title} を抽出します",
  "ts||Tab {index}||ja": "タブ {index}",
  "ts||Extract {}||ja": "{} を抽出します",
  "ts||Extracts in {}||ja": "{} の抽出",
  "ts||No items were selected||ja": "項目が選択されていませんでした",
  "ts||Selected items: {nb} Area: {area} m²||ja": "選択されたアイテム: {nb} 面積: {area} 平方メートル",
  "ts||Selected itemss: {nb} - Length: {lenght}m||ja": "選択したアイテム: {nb} - 長さ: {lenght}m",
  "ts||Selected items: {nb}||ja": "選択したアイテム: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||ja": "[highlight_features] ステータス バーの更新に失敗しました: {e_sb}",
  "ts||Apply||ja": "適用する",
  "ts||Cancel||ja": "キャンセル",
  "ts||Sheet||ja": "シート",
  "ts||Error||ja": "エラー",
  "ts||Cannot create export folder.||ja": "エクスポートフォルダーを作成できません。",
  "ts||Selection made in||ja": "選択された年",
  "ts||Information||ja": "情報",
  "ts||No active tab found.||ja": "アクティブなタブが見つかりません。",
  "ts||No data to save.||ja": "保存するデータがありません。",
  "ts||Save in...||ja": "保存先...",
  "ts||OpenDocument Spreadsheet (*.ods)||ja": "OpenDocument スプレッドシート (*.ods)",
  "ts||Unable to replace the existing file.||ja": "既存のファイルを置き換えることはできません。",
  "ts||Please close it if it is open in another application, then try again.||ja": "別のアプリケーションで開いている場合は閉じてから、もう一度お試しください。",
  "ts||{path}||ja": "{path}",
  "ts||Unable to write file:||ja": "ファイルに書き込めません:",
  "ts||{e_rep}||ja": "{e_rep}",
  "ts||Open file?||ja": "ファイルを開きますか?",
  "ts||ODS workbook created successfully:||ja": "ODS ワークブックが正常に作成されました:",
  "ts||Open||ja": "開ける",
  "ts||Unable to open the ODS file automatically:||ja": "ODS ファイルを自動的に開くことができません:",
  "ts||{e_open}||ja": "{e_open}",
  "ts||Give a name to the item:||ja": "項目に名前を付けます。",
  "ts||Name…||ja": "名前…",
  "ts||Text…||ja": "文章…",
  "ts||Drawing||ja": "描画",
  "ts||Add text||ja": "テキストを追加する",
  "ts||Type the text to display:||ja": "表示するテキストを入力します。",
  "ts||Add point||ja": "ポイントを追加",
  "ts||Give a name to the point:||ja": "ポイントに名前を付けます。",
  "ts||Point…||ja": "ポイント…",
  "ts||Add line||ja": "行を追加",
  "ts||Give a name to the line:||ja": "行に名前を付けます。",
  "ts||Line…||ja": "ライン…",
  "ts||Add polygon||ja": "ポリゴンの追加",
  "ts||Give a name to the polygon:||ja": "ポリゴンに名前を付けます。",
  "ts||Polygon…||ja": "ポリゴン…",
  "ts||Buffer selection||ja": "バッファの選択",
  "ts||Name this selection (buffer):||ja": "この選択範囲に名前を付けます (バッファー):",
  "ts||Buffer…||ja": "バッファ…",
  "ts||Add to an existing layer||ja": "既存のレイヤーに追加する",
  "ts||Selecting...||ja": "選択中...",
  "ts||Pass||ja": "合格",
  "ts||Drawings||ja": "図面",
  "ts||DMS Point drawing tool||ja": "DMS ポイント描画ツール",
  "ts||Text drawing tool||ja": "テキスト描画ツール",
  "ts||Point drawing tool||ja": "点描画ツール",
  "ts||Line drawing tool||ja": "線画ツール",
  "ts||Rectangle drawing tool||ja": "長方形描画ツール",
  "ts||Circle drawing tool||ja": "円描画ツール",
  "ts||Polygon drawing tool||ja": "多角形描画ツール",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||ja": "選択したレイヤー内のオブジェクトのポリゴン選択によるバッファー描画",
  "ts||Buffer drawing on objects in selected layer||ja": "選択したレイヤー内のオブジェクトにバッファ描画します",
  "ts||Install the Gestion_crise plugin||ja": "Crisis_management プラグインをインストールする",
  "ts||Help / User manual||ja": "ヘルプ/ユーザーマニュアル",
  "ts||No selection||ja": "選択なし",
  "ts||No selected items found in visible vector layers.||ja": "表示されているベクター レイヤーに選択されたアイテムが見つかりません。",
  "ts||XY point drawing tool||ja": "XY点描画ツール",
  "ts||DMS point drawing tool||ja": "DMS ポイント描画ツール",
  "ts||Saisie incorrecte ou clic sur Annuler||ja": "入力が間違っているか、「キャンセル」をクリックしてください",
  "ts||Invalid input !||ja": "無効な入力です!",
  "ts||Buffer drawing tool on the selected layer||ja": "選択したレイヤーのバッファ描画ツール",
  "ts||Polygon buffer drawing tool on the selected layer||ja": "選択したレイヤー上のポリゴンバッファ描画ツール",
  "ts||Left click to place a text.||ja": "左クリックしてテキストを配置します。",
  "ts||Left click to place a point.||ja": "左クリックして点を配置します。",
  "ts||Left click to place points.||ja": "左クリックして点を配置します。",
  "ts||Right click to confirm.||ja": "右クリックして確認します。",
  "ts||Maintain the left click to draw a rectangle.||ja": "左クリックを維持して長方形を描きます。",
  "ts||Maintain the left click to draw a circle.||ja": "左クリックを維持して円を描きます。",
  "ts||Simple left click to give a perimeter.||ja": "左クリックするだけで周囲を指定できます。",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||ja": "レイヤー ツリーでベクター レイヤーを選択し、マップ上でエンティティを選択します。",
  "ts||Length: {value} m||ja": "長さ: {value} m",
  "ts||Area: {value} m²||ja": "面積: {value} 平方メートル",
  "ts||No object selected||ja": "オブジェクトが選択されていません",
  "ts||No object was found under the click.||ja": "クリックの下にオブジェクトが見つかりませんでした。",
  "ts||Please click directly on an object of the active layer.||ja": "アクティブレイヤーのオブジェクトを直接クリックしてください。",
  "ts||Buffer creation||ja": "バッファの作成",
  "ts||Do you want to create a buffer around the selected object?||ja": "選択したオブジェクトの周囲にバッファを作成しますか?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||ja": "選択範囲でオブジェクト自体を使用するか、その周囲のバッファを使用するかを選択します。",
  "ts||Create buffer||ja": "バッファの作成",
  "ts||No buffer||ja": "バッファなし",
  "ts||Buffer size||ja": "バッファサイズ",
  "ts||Enter the buffer size in meters:||ja": "バッファ サイズをメートル単位で入力します。",
  "ts||(works only with a metric coordinate reference system)||ja": "(メートル座標参照系でのみ機能します)",
  "ts||Circle name||ja": "サークル名",
  "ts||Enter a name for the circle:||ja": "サークルの名前を入力してください:",
  "ts||Circle…||ja": "丸…",
  "ts||Rectangle name||ja": "長方形の名前",
  "ts||Enter a name for the rectangle:||ja": "長方形の名前を入力します。",
  "ts||Rectangle…||ja": "矩形…",
  "ts||Polygon name||ja": "ポリゴン名",
  "ts||Enter a name for the polygon:||ja": "ポリゴンの名前を入力します。",
  "ts||Buffer name||ja": "バッファ名",
  "ts||Enter a name for the buffer:||ja": "バッファの名前を入力します。",
  "ts||Choosing a selection||ja": "選択範囲を選択する",
  "ts||{name} drawn.||ja": "{name} が描画されました。",
  "ts||Make a selection within its extent?||ja": "その範囲内で選択しますか?",
  "ts||No group found||ja": "グループが見つかりませんでした",
  "ts||Aucun groupe n’existe dans le projet.||ja": "プロジェクトにグループが存在しません。",
  "ts||Créez un groupe et choisissez les couches à y mettre :||ja": "グループを作成し、そこに入れるレイヤーを選択します。",
  "ts||New group name||ja": "新しいグループ名",
  "ts||Available layers||ja": "利用可能なレイヤー",
  "ts||You must name the group.||ja": "グループに名前を付ける必要があります。",
  "ts||Group created||ja": "グループが作成されました",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||ja": "{new_group_name} グループが作成され、選択したレイヤーが移動されました。",
  "ts||Perimeter||ja": "周囲",
  "ts||Give a perimeter in m:||ja": "周長を m 単位で指定します。",
  "ts||(works only with metric crs)||ja": "(メトリクス crs でのみ機能します)",
  "ts||End of selection||ja": "選択の終了",
  "ts||The {sel_group} group has been unchecked.||ja": "{sel_group} グループはオフになっています。",
  "ts||Warning||ja": "警告",
  "ts||You didn't click on a layer's attribute !||ja": "レイヤーの属性をクリックしませんでした。",
  "ts||You must give a non-null value for a point's or line's perimeter!||ja": "ポイントまたはラインの周囲には null 以外の値を指定する必要があります。",
  "ts||There is no selected layer, or it is not vector nor visible!||ja": "選択されたレイヤーがないか、ベクターでも表示されません。",
  "ts||No groups||ja": "グループなし",
  "ts||All groups are already checked.||ja": "すべてのグループはすでにチェックされています。",
  "ts||Choose a group for selection||ja": "選択するグループを選択してください",
  "ts||Choose a group from the list:||ja": "リストからグループを選択します。",
  "ts||WARNING!||ja": "警告！",
  "ts||Command not available:||ja": "コマンドは使用できません:",
  "ts||empty project.||ja": "空のプロジェクト。",
  "ts||Start again||ja": "もう一度始める",
  "ts||No layer or group is selected.||ja": "レイヤーまたはグループが選択されていません。",
  "ts||Start again.||ja": "もう一度始めてください。",
  "ts||Selection not possible.||ja": "選択はできません。",
  "ts||The checked layer is not a polygon.||ja": "チェックされたレイヤーはポリゴンではありません。",
  "ts||No layer is selected in the Layer Manager.||ja": "レイヤ マネージャでレイヤが選択されていません。",
  "ts||QdrawEVT Help - Gestion_crise||ja": "QdrawEVT ヘルプ - Crisis_management",
  "ts||No help file was found in the 'help' folder.||ja": "「ヘルプ」フォルダー内にヘルプ ファイルが見つかりませんでした。",
  "ts||Unable to read the help file: {error}||ja": "ヘルプ ファイルを読み取れません: {error}",
  "ts||Close||ja": "近い",
  "ts||QdrawEVT - Settings||ja": "QdrawEVT - 設定",
  "ts||Change the drawing color||ja": "描画色を変更する",
  "ts||Change text font||ja": "テキストのフォントを変更する",
  "ts||Change text color||ja": "文字の色を変更する",
  "ts||Create the group and the event layers||ja": "グループレイヤーとイベントレイヤーを作成する",
  "ts||Enjeux||ja": "課題",
  "ts||Aléas/risques||ja": "危険性/リスク",
  "ts||RDI||ja": "RDI",
  "ts||Administratif||ja": "管理的",
  "ts||Fonds de plan||ja": "資金計画",
  "ts||Creation of event shapefile||ja": "イベントシェープファイルの作成",
  "ts||Possible only in a saved project.||ja": "保存されたプロジェクトでのみ可能です。",
  "ts||Error when creating shapefile||ja": "シェープファイル作成時のエラー",
  "ts||QdrawEVT||ja": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||ja": "図面フットプリント内でエンティティを簡単に描画および選択",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||ja": "QdrawEVT を使用すると、マップ上に点、線、多角形を直接描画し、交差するレイヤーの選択を実行できます。",
  "ts||A dedicated help is available from the plugin menu.||ja": "専用のヘルプはプラグイン メニューから利用できます。",
  "ts||drawing, selection, events, vector, tools||ja": "描画、選択、イベント、ベクトル、ツール",
  "ts||François Thévand||ja": "フランソワ・テヴァン",
  "ts||francois.thevand@gmail.com||ja": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||ja": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||ja": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Rectangle size||ko": "직사각형 크기",
  "ts||Give a size in m:||ko": "크기를 m 단위로 입력하세요.",
  "ts||Width:||ko": "너비:",
  "ts||Height:||ko": "키:",
  "ts||Radius||ko": "반지름",
  "ts||Give a radius in m:||ko": "반경을 m 단위로 지정합니다.",
  "ts||DMS Point Tool||ko": "DMS 포인트 도구",
  "ts||Latitude||ko": "위도",
  "ts||Longitude||ko": "경도",
  "ts||Degrees||ko": "학위",
  "ts||Minutes||ko": "분",
  "ts||Seconds||ko": "초",
  "ts||Direction||ko": "방향",
  "ts||XY Point drawing tool||ko": "XY 점 그리기 도구",
  "ts||Selection made in %1 perimeter||ko": "%1 경계에서 선택됨",
  "ts||Save this tab's results||ko": "이 탭의 결과를 저장하세요.",
  "ts||Save all results||ko": "모든 결과 저장",
  "ts||Export the selection as a memory layer||ko": "선택 항목을 메모리 레이어로 내보내기",
  "ts||Export all tabs as a memory layer||ko": "모든 탭을 메모리 레이어로 내보내기",
  "ts||Zoom to selected attributes||ko": "선택한 속성으로 확대",
  "ts||Highlight feature's geometry||ko": "피처의 지오메트리 강조",
  "ts||Settings||ko": "설정",
  "ts||Loading...||ko": "로드 중...",
  "ts||Rename window||ko": "창 이름 바꾸기",
  "ts||Enter a new title:||ko": "새 제목을 입력하세요.",
  "ts||Highlight feature's centroid||ko": "피처의 중심 강조 표시",
  "ts||Extracts in {name}||ko": "{name}에서 추출",
  "ts||Session||ko": "세션",
  "ts||Extract {title}||ko": "{title} 추출",
  "ts||Tab {index}||ko": "탭 {index}",
  "ts||Extract {}||ko": "{} 추출",
  "ts||Extracts in {}||ko": "{}에서 추출",
  "ts||No items were selected||ko": "선택된 항목이 없습니다.",
  "ts||Selected items: {nb} Area: {area} m²||ko": "선택한 항목: {nb} 면적: {area} m²",
  "ts||Selected itemss: {nb} - Length: {lenght}m||ko": "선택한 항목: {nb} - 길이: {lenght}m",
  "ts||Selected items: {nb}||ko": "선택한 항목: {nb}",
  "ts||[highlight_features] Status bar update failed: {e_sb}||ko": "[highlight_features] 상태 표시줄 업데이트 실패: {e_sb}",
  "ts||Apply||ko": "적용하다",
  "ts||Cancel||ko": "취소",
  "ts||Sheet||ko": "시트",
  "ts||Error||ko": "오류",
  "ts||Cannot create export folder.||ko": "내보내기 폴더를 생성할 수 없습니다.",
  "ts||Selection made in||ko": "선택은 다음에서 이루어졌습니다.",
  "ts||Information||ko": "정보",
  "ts||No active tab found.||ko": "활성 탭을 찾을 수 없습니다.",
  "ts||No data to save.||ko": "저장할 데이터가 없습니다.",
  "ts||Save in...||ko": "다음에 저장...",
  "ts||OpenDocument Spreadsheet (*.ods)||ko": "OpenDocument 스프레드시트(*.ods)",
  "ts||Unable to replace the existing file.||ko": "기존 파일을 바꿀 수 없습니다.",
  "ts||Please close it if it is open in another application, then try again.||ko": "다른 응용 프로그램에서 열려 있으면 닫은 후 다시 시도하십시오.",
  "ts||{path}||ko": "{path}",
  "ts||Unable to write file:||ko": "파일을 쓸 수 없습니다:",
  "ts||{e_rep}||ko": "{e_rep}",
  "ts||Open file?||ko": "파일을 열까요?",
  "ts||ODS workbook created successfully:||ko": "ODS 통합 문서가 성공적으로 생성되었습니다:",
  "ts||Open||ko": "열려 있는",
  "ts||Unable to open the ODS file automatically:||ko": "ODS 파일을 자동으로 열 수 없습니다:",
  "ts||{e_open}||ko": "{e_open}",
  "ts||Give a name to the item:||ko": "항목에 이름을 지정하십시오.",
  "ts||Name…||ko": "이름…",
  "ts||Text…||ko": "텍스트…",
  "ts||Drawing||ko": "그림",
  "ts||Add text||ko": "텍스트 추가",
  "ts||Type the text to display:||ko": "표시할 텍스트를 입력하세요.",
  "ts||Add point||ko": "포인트 추가",
  "ts||Give a name to the point:||ko": "요점에 이름을 지정하십시오.",
  "ts||Point…||ko": "가리키다…",
  "ts||Add line||ko": "줄 추가",
  "ts||Give a name to the line:||ko": "행에 이름을 지정하십시오.",
  "ts||Line…||ko": "선…",
  "ts||Add polygon||ko": "다각형 추가",
  "ts||Give a name to the polygon:||ko": "다각형에 이름을 지정합니다.",
  "ts||Polygon…||ko": "다각형…",
  "ts||Buffer selection||ko": "버퍼 선택",
  "ts||Name this selection (buffer):||ko": "이 선택 항목의 이름을 지정합니다(버퍼):",
  "ts||Buffer…||ko": "완충기…",
  "ts||Add to an existing layer||ko": "기존 레이어에 추가",
  "ts||Selecting...||ko": "선택 중...",
  "ts||Pass||ko": "통과하다",
  "ts||Drawings||ko": "도면",
  "ts||DMS Point drawing tool||ko": "DMS 포인트 그리기 도구",
  "ts||Text drawing tool||ko": "텍스트 그리기 도구",
  "ts||Point drawing tool||ko": "포인트 그리기 도구",
  "ts||Line drawing tool||ko": "선 그리기 도구",
  "ts||Rectangle drawing tool||ko": "직사각형 그리기 도구",
  "ts||Circle drawing tool||ko": "원 그리기 도구",
  "ts||Polygon drawing tool||ko": "다각형 그리기 도구",
  "ts||Buffer drawing with polygonal selection of objects in the selected layer||ko": "선택한 레이어의 개체를 다각형으로 선택하여 버퍼 그리기",
  "ts||Buffer drawing on objects in selected layer||ko": "선택한 레이어의 개체에 대한 버퍼 그리기",
  "ts||Install the Gestion_crise plugin||ko": "Crisis_management 플러그인 설치",
  "ts||Help / User manual||ko": "도움말/사용 설명서",
  "ts||No selection||ko": "선택사항 없음",
  "ts||No selected items found in visible vector layers.||ko": "보이는 벡터 레이어에서 선택한 항목을 찾을 수 없습니다.",
  "ts||XY point drawing tool||ko": "XY 점 그리기 도구",
  "ts||DMS point drawing tool||ko": "DMS 포인트 그리기 도구",
  "ts||Saisie incorrecte ou clic sur Annuler||ko": "잘못 입력했거나 취소를 클릭하세요",
  "ts||Invalid input !||ko": "입력이 잘못되었습니다!",
  "ts||Buffer drawing tool on the selected layer||ko": "선택한 레이어의 버퍼 그리기 도구",
  "ts||Polygon buffer drawing tool on the selected layer||ko": "선택한 레이어의 다각형 버퍼 그리기 도구",
  "ts||Left click to place a text.||ko": "텍스트를 배치하려면 마우스 왼쪽 버튼을 클릭하세요.",
  "ts||Left click to place a point.||ko": "포인트를 배치하려면 마우스 왼쪽 버튼을 클릭하세요.",
  "ts||Left click to place points.||ko": "포인트를 배치하려면 마우스 왼쪽 버튼을 클릭하세요.",
  "ts||Right click to confirm.||ko": "확인하려면 마우스 오른쪽 버튼을 클릭하세요.",
  "ts||Maintain the left click to draw a rectangle.||ko": "직사각형을 그리려면 왼쪽 클릭을 유지하세요.",
  "ts||Maintain the left click to draw a circle.||ko": "원을 그리려면 왼쪽 클릭을 유지하세요.",
  "ts||Simple left click to give a perimeter.||ko": "간단한 왼쪽 클릭으로 둘레를 지정할 수 있습니다.",
  "ts||Select a vector layer in the Layer Tree, then select an entity on the map.||ko": "레이어 트리에서 벡터 레이어를 선택한 다음 맵에서 개체를 선택합니다.",
  "ts||Length: {value} m||ko": "길이: {value}m",
  "ts||Area: {value} m²||ko": "면적: {value}m²",
  "ts||No object selected||ko": "선택한 개체가 없습니다.",
  "ts||No object was found under the click.||ko": "클릭 시 개체가 발견되지 않았습니다.",
  "ts||Please click directly on an object of the active layer.||ko": "활성 레이어의 개체를 직접 클릭하세요.",
  "ts||Buffer creation||ko": "버퍼 생성",
  "ts||Do you want to create a buffer around the selected object?||ko": "선택한 개체 주위에 버퍼를 생성하시겠습니까?",
  "ts||Choose whether the selection must use the object itself or a buffer around it.||ko": "선택 시 개체 자체를 사용해야 하는지 아니면 개체 주변의 버퍼를 사용해야 하는지 선택합니다.",
  "ts||Create buffer||ko": "버퍼 생성",
  "ts||No buffer||ko": "버퍼 없음",
  "ts||Buffer size||ko": "버퍼 크기",
  "ts||Enter the buffer size in meters:||ko": "버퍼 크기를 미터 단위로 입력합니다.",
  "ts||(works only with a metric coordinate reference system)||ko": "(미터법 좌표계에서만 작동)",
  "ts||Circle name||ko": "서클 이름",
  "ts||Enter a name for the circle:||ko": "서클 이름을 입력하세요.",
  "ts||Circle…||ko": "원…",
  "ts||Rectangle name||ko": "직사각형 이름",
  "ts||Enter a name for the rectangle:||ko": "직사각형 이름을 입력하세요.",
  "ts||Rectangle…||ko": "구형…",
  "ts||Polygon name||ko": "다각형 이름",
  "ts||Enter a name for the polygon:||ko": "다각형 이름을 입력하세요.",
  "ts||Buffer name||ko": "버퍼 이름",
  "ts||Enter a name for the buffer:||ko": "버퍼 이름을 입력하세요.",
  "ts||Choosing a selection||ko": "선택 항목 선택",
  "ts||{name} drawn.||ko": "{name}이 그려졌습니다.",
  "ts||Make a selection within its extent?||ko": "해당 범위 내에서 선택하시겠습니까?",
  "ts||No group found||ko": "그룹을 찾을 수 없습니다.",
  "ts||Aucun groupe n’existe dans le projet.||ko": "프로젝트에 그룹이 없습니다.",
  "ts||Créez un groupe et choisissez les couches à y mettre :||ko": "그룹을 만들고 그룹에 넣을 레이어를 선택하세요.",
  "ts||New group name||ko": "새 그룹 이름",
  "ts||Available layers||ko": "사용 가능한 레이어",
  "ts||You must name the group.||ko": "그룹 이름을 지정해야 합니다.",
  "ts||Group created||ko": "그룹이 생성되었습니다.",
  "ts||The {new_group_name} group has been created and the selected layers have been moved.||ko": "{new_group_name} 그룹이 생성되었으며 선택한 레이어가 이동되었습니다.",
  "ts||Perimeter||ko": "둘레",
  "ts||Give a perimeter in m:||ko": "둘레를 m 단위로 입력하세요.",
  "ts||(works only with metric crs)||ko": "(메트릭 crs에서만 작동)",
  "ts||End of selection||ko": "선택 종료",
  "ts||The {sel_group} group has been unchecked.||ko": "{sel_group} 그룹이 선택 취소되었습니다.",
  "ts||Warning||ko": "경고",
  "ts||You didn't click on a layer's attribute !||ko": "레이어의 속성을 클릭하지 않았습니다!",
  "ts||You must give a non-null value for a point's or line's perimeter!||ko": "점이나 선의 둘레에는 null이 아닌 값을 제공해야 합니다!",
  "ts||There is no selected layer, or it is not vector nor visible!||ko": "선택한 레이어가 없거나 벡터도 아니고 보이지도 않습니다!",
  "ts||No groups||ko": "그룹 없음",
  "ts||All groups are already checked.||ko": "모든 그룹이 이미 선택되어 있습니다.",
  "ts||Choose a group for selection||ko": "선택할 그룹을 선택하세요",
  "ts||Choose a group from the list:||ko": "목록에서 그룹을 선택하세요.",
  "ts||WARNING!||ko": "경고!",
  "ts||Command not available:||ko": "사용할 수 없는 명령:",
  "ts||empty project.||ko": "빈 프로젝트.",
  "ts||Start again||ko": "다시 시작",
  "ts||No layer or group is selected.||ko": "레이어나 그룹이 선택되지 않았습니다.",
  "ts||Start again.||ko": "다시 시작하세요.",
  "ts||Selection not possible.||ko": "선택이 불가능합니다.",
  "ts||The checked layer is not a polygon.||ko": "체크된 레이어는 폴리곤이 아닙니다.",
  "ts||No layer is selected in the Layer Manager.||ko": "레이어 관리자에서 레이어가 선택되지 않았습니다.",
  "ts||QdrawEVT Help - Gestion_crise||ko": "QdrawEVT 도움말 - Crisis_management",
  "ts||No help file was found in the 'help' folder.||ko": "'help' 폴더에 도움말 파일이 없습니다.",
  "ts||Unable to read the help file: {error}||ko": "도움말 파일을 읽을 수 없습니다: {error}",
  "ts||Close||ko": "닫다",
  "ts||QdrawEVT - Settings||ko": "QdrawEVT - 설정",
  "ts||Change the drawing color||ko": "그리기 색상 변경",
  "ts||Change text font||ko": "텍스트 글꼴 변경",
  "ts||Change text color||ko": "텍스트 색상 변경",
  "ts||Create the group and the event layers||ko": "그룹 및 이벤트 레이어 생성",
  "ts||Enjeux||ko": "도전과제",
  "ts||Aléas/risques||ko": "위험/위험",
  "ts||RDI||ko": "RDI",
  "ts||Administratif||ko": "행정",
  "ts||Fonds de plan||ko": "자금 계획",
  "ts||Creation of event shapefile||ko": "이벤트 셰이프파일 생성",
  "ts||Possible only in a saved project.||ko": "저장된 프로젝트에서만 가능합니다.",
  "ts||Error when creating shapefile||ko": "쉐이프파일을 생성하는 중 오류가 발생했습니다.",
  "ts||QdrawEVT||ko": "QdrawEVT",
  "ts||Easily draw and select entities within the drawing footprint||ko": "도면 공간 내에서 도면요소를 쉽게 그리고 선택",
  "ts||QdrawEVT allows you to draw points, lines and polygons directly on the map and perform selections of intersecting layers.||ko": "QdrawEVT를 사용하면 지도에 직접 점, 선, 다각형을 그리고 교차하는 레이어를 선택할 수 있습니다.",
  "ts||A dedicated help is available from the plugin menu.||ko": "플러그인 메뉴에서 전용 도움말을 사용할 수 있습니다.",
  "ts||drawing, selection, events, vector, tools||ko": "그리기, 선택, 이벤트, 벡터, 도구",
  "ts||François Thévand||ko": "프랑수아 테반드",
  "ts||francois.thevand@gmail.com||ko": "francois.thevand@gmail.com",
  "ts||https://github.com/fthvd/qdrawEVT||ko": "https://github.com/fthvd/qdrawEVT",
  "ts||https://github.com/fthvd/qdrawEVT/issues||ko": "https://github.com/fthvd/qdrawEVT/issues",
  "ts||Required event layer not found: {}||fr": "Couche d'événements requise introuvable : {}",
  "ts||Layer {} does not have the expected geometry type.||fr": "La couche {} n'a pas le type de géométrie attendu.",
  "ts||The coordinate entry window will reopen automatically after the countdown, or immediately after OK.||fr": "La fenêtre de saisie des coordonnées se rouvrira automatiquement après le compte à rebours, ou immédiatement après OK.",
  "ts||OK ({s})||fr": "D'accord ({s})",
  "ts||unknown CRS||fr": "CRS inconnu",
  "ts||The entered coordinates ({pt}) are not valid for the selected source projection {src}.||fr": "Les coordonnées saisies ({pt}) ne sont pas valides pour la projection source sélectionnée {src}.",
  "ts||Choose the projection matching the coordinates, then try again.||fr": "Choisissez la projection correspondant aux coordonnées, puis réessayez.",
  "ts||Project projection:||fr": "Projection du projet :",
  "ts||{dst}.||fr": "{dst}.",
  "ts||Invalid coordinates or projection||fr": "Coordonnées ou projection invalides",
  "ts||Coordinate input cancelled or invalid||fr": "Saisie des coordonnées annulée ou invalide",
  "ts||No point was created.||fr": "Aucun point n'a été créé.",
  "ts||{dst}.||en": "{dst}.",
  "ts||Selected features: 0||fr": "Fonctionnalités sélectionnées : 0",
  "ts||Selected features: {} Area: {} m²||fr": "Caractéristiques sélectionnées : {} Superficie : {} m²",
  "ts||Selected features: {} - Length: {}m||fr": "Caractéristiques sélectionnées : {} - Longueur : {}m",
  "ts||Selected features: {}||fr": "Fonctionnalités sélectionnées : {}",
  "ts||[highlight_features] Status bar update failed: {}||fr": "[highlight_features] Échec de la mise à jour de la barre d'état : {}",
  "ts||Saving?||fr": "Économie?",
  "ts||Would you like to save results before exit?||fr": "Souhaitez-vous enregistrer les résultats avant de quitter ?",
  "ts||Give a name to the feature:||fr": "Donnez un nom à la fonctionnalité :",
  "ts||Select||fr": "Sélectionner",
  "ts||Drawing completed. Make a selection in its grip? WARNING: remember to check the desired groups and layers in the selection||fr": "Dessin terminé. Faire une sélection sous son emprise ? ATTENTION : pensez à cocher les groupes et calques souhaités dans la sélection",
  "ts||Outil de dessin de texte||fr": "Outil de dessin de texte",
  "ts||No selected features found in visible vector layers.||fr": "Aucune entité sélectionnée trouvée dans les couches vectorielles visibles.",
  "ts||Length: {}m||fr": "Longueur : {}m",
  "ts||Length: 0 m||fr": "Longueur : 0 m",
  "ts||Area: {}m²||fr": "Superficie : {}m²",
  "ts||Area: 0m²||fr": "Superficie : 0m²",
  "ts||Give a buffer size in m:||fr": "Donnez une taille de tampon en m :",
  "ts||{} drawn.||fr": "{} dessiné.",
  "ts||Make a selection in his grip?||fr": "Faire une sélection sous sa main ?",
  "ts||Group selection||fr": "Sélection de groupe",
  "ts||The {} group has been selected and checked temporarily.||fr": "Le groupe {} a été sélectionné et vérifié temporairement.",
  "ts||Selection cancelled||fr": "Sélection annulée",
  "ts||No groups were selected.||fr": "Aucun groupe n'a été sélectionné.",
  "ts||The {} group has been unchecked.||fr": "Le groupe {} a été décoché.",
  "ts||All groups are already ticked.||fr": "Tous les groupes sont déjà cochés.",
  "ts||Selecting an unchecked group||fr": "Sélection d'un groupe non coché",
  "ts||Choose a group to check:||fr": "Choisissez un groupe à vérifier :",
  "ts||Command not operational, empty project||fr": "Commande non opérationnelle, projet vide",
  "ts||No layer, no group are checked. Start again||fr": "Aucun calque, aucun groupe n'est coché. Recommencer",
  "ts||Sélection impossible.||fr": "Sélection impossible.",
  "ts||la couche cochée n'est pas un polygone.||fr": "la couche cochée n'est pas un polygone.",
  "ts||Aucune couche n'est sélectionnée dans le gestionnaire de couches.||fr": "Aucune couche n'est sélectionnée dans le gestionnaire de couches.",
  "ts||Select||en": "Select",
  "ts||Outil de dessin de texte||en": "Text drawing tool",
  "ts||Sélection impossible.||en": "Selection not possible.",
  "ts||la couche cochée n'est pas un polygone.||en": "the checked layer is not a polygon.",
  "ts||Aucune couche n'est sélectionnée dans le gestionnaire de couches.||en": "No layers are selected in the Layer Manager."
}