{"name": "EarthWorkQ", "package_name": "earthworkq", "version": "1.1", "experimental": false, "qgis_min": "3.22.0", "qgis_max": "4.99.0", "downloads": 212, "uploaded_by": "rahulpandey696", "upload_datetime": "2026-10-10T01:45:53.872433", "changelog": "1.1\n- New road corridor earthwork tool: end-area volumes by the prismoidal or\naverage end area rule, swept cross-section template with superelevation\nand widening, daylighted batters and solved catch points\n- Earthworks measured to subgrade with finished level reported alongside\nand the pavement volume given as the difference\n- Vertical profile from 3D centreline Z or a chainage/level CSV with\noptional parabolic vertical curves; optional solve for the balancing\ngrade line\n- Mass haul diagram in bank measure with balance points, free haul and\noverhaul\n- 3D corridor model as PolygonZ in GeoPackage and as DXF 3DFACE, with\ncatch lines and the earthwork footprint\n- Cross-section and long-section PDF sheets, chainage quantity CSV\n- Emlid Reach CSV quality filtering on solution status and RMS, with an\nellipsoidal-height trap; DXF input with 3D polylines as breaklines\n- Existing-ground inputs shared between the area and corridor tools\n- Fourth Processing algorithm for the corridor\n\n1.0\nInitial release.\n- Elevation input from CSV/XLSX tables, point layers, contour polylines or a DEM\n- Eight swappable interpolation engines, filtered by input type and by what is\ninstalled, with ten-fold cross-validation and per-engine RMSE reporting\n- Contour topology validation, automatic densification, GRASS r.surf.contour support\n- Fractional boundary cell weighting by sub-cell rasterisation\n- Flat level, sloped plane and design DEM formation surfaces\n- Void-ratio shrinkage and bulking; optional water content for conditioning\nwater, haul mass and degree-of-saturation validation; topsoil stripping\n- Balance level solved by bisection against cut = SF x fill, plus the level\nof minimum total earthmoving\n- Grid convergence test and exact TIN prismatic cross-check\n- HTML calculation report, styled rasters, zone polygons, depth contours,\ncharts and CSV outputs\n- Three Processing algorithms\n- Runs on QGIS 3.22 through QGIS 4.x, Qt5 and Qt6", "external_deps": "", "download_url": "https://plugins.qgis.org/plugins/earthworkq/version/1.1/download/"}